I'm getting these Message during Lenny startup:
Code:
mount : according to mtab, procbususb is already mounted on /proc/bus/usb failed.What's wrong and howto solve this problem?
i got problem which slows my boot to linux. Before loading Ubuntu logo in console i see fast flash with words: "Warning: unable to find a suitable fs in /proc/mount, is it mounted? Use --subdomainfs to override." What should i do? To fix that warning?
View 3 Replies View RelatedI've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
I want to know what's going on here. I'm used to find files in my Debian box usingfind / -type f -print0 | xargs -0 grep -l "foo"but it's been a while since this type of search simply stops at the /proc/kcore directory. I know it has something to do with memory. Is this normal?
View 1 Replies View RelatedI am trying to edit the file shmmax in proc/sys/kernel/. I want to increase the value. I am using vim to edit it. But when I try to write and close the file I get the following error: "shmmax" E667: Fsync failed Press ENTER or type command to continue
View 3 Replies View RelatedHDD partitioned for novice - everything in one partition, in one folder /.
/dev/sda3117290636 38456100 72876432 35% /
tmpfs 1037460 10374600% /lib/init/rw
udev 10240 852 93889% /dev
[code]....
I am trying to edit the file shmmax in proc/sys/kernel/. I want to increase the value. I am using vim to edit it. But when I try to write and close the file I get the following error:
Quote:
"shmmax" E667: Fsync failed
Press ENTER or type command to continue
I have read that this can be cause by a full disk. I checked with df and have plenty of space available.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I have two machine, host1 and host2, that are running Debian 3.1 in an HA setup. AFAIK, they are exactly the same. In the course of tracking down some monitoring bugs, I discovered that on host2 "netstat -s" gives
[Code]..
When I enter "cat /proc/scsi/scsi" I'm returned with "cat: /proc/scsi/scsi: No such file or directory". I've tried this on two different installs on two different machines.
View 6 Replies View RelatedMy swap is not mounted at boot. get it to mount again? I CAN make it mount after booting but I need to hibernate. I read that I have to edit /etc/fstab but I'm not quite sure as to what I have to do specifically.
View 11 Replies View RelatedI've carelessly installed grub on hda5 instead of hda, using:
# grub-install /dev/hda5
And now my hda5 cannot be mounted with ntfs-3g. Here the error message 'mount' gives:
Failed to mount '/dev/hda5': Invalid argument
The device '/dev/hda5' doesn't seem to have a valid NTFS.
As far as I know, grub-install rewrites the 1st sector of the device, and I've been reading this guide on recover the 1st sector of an NTFS partition. The problem is that the Disk Probe tool is available in Windows only. Is there any similar software in Debian to do the same thing (i.e allows us to edit sectors of the hard drives available in the computer)? Any easier tool / method to restore the NTFS partition without read and write sectors manually.
when I mount DVD-ROM to some files from xterm, the systerm never responsed! I used this command: sudo mount -t iso9660 /dev/cdrom /mnt/cd I search some info from google ,some guys say these info may help ,but I don't understand why it cab be crashed when I mount the CD from DVD-ROM.
/etc/fstab
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
lrwxrwxrwx 1 root root 3 05-22 19:54 /dev/dvd -> sr
dmesg |grep hd
[ 9.126848] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS.
I've been scouring the net and I'm sure it's something simple but here's my problem. I have a BeagleBone Black running Debian from a uSD card. I also have a 1TB WD My Passport external HD. If I have the external drive plugged in when I boot it is mounted under /media/My Passport it is formated NTFS since it was being used for windows. Being that I'm planning on eventually planning on making this a nas/owncloud device mounting at boot is fine but I would like to mount it under another directory. I've looked in /etc/rc.local and /etc/fstab and it does not mention that drive in either place and autofs is not installed.
View 5 Replies View Relatedi had the problem of mounting the windows drives on to Debian OS. i got it fixed with some help.now i can access it from COMPUTER. BUT my all Windows Drives (C,D..)are also seen on my Desktop.(with computer,home, trash C,D......)can it be made invisible/Not on the desktop?
View 1 Replies View RelatedI have successfully installed debian and updated it. After few days of installation maybe around a month. I tried to install some other software from synaptic but my installation CD isn't being detected like before. What do I do? The CD can be opened etc., but its not getting mounted as /cd-rom/ which the synaptic packagemanger searches most of the time.
View 2 Replies View RelatedI am trying to save a document in a mounted partition but its says I don't have the permissions to save the file. It says this for any partition. I am only able to save it in my home directory. How to I solve this. Basically I am trying to access a file in linux in windows xp. So I need to save the file in fat 32 partition which it is not allowing me to do.
View 4 Replies View RelatedI hv installed debian (lenny). My problem is that sometimes it loads perfecly, but on other times it gets stucks at mounted the root. and waiting for the root. wht shd i do?
View 14 Replies View RelatedI would like to resize the /home partition but it is mounted and when umount is run, it errors with 'busy'.
System Configuration:
I installed jessie on a laptop with one SSD. I used guided partitioning and selected the whole drive with multiple partitions. The /home now takes up 420 GB. I would like to reduce that to 20 GB to make room for another partition.
What are the methods reduce this partition?
How to run a fsck on a mounted drive? I attempted unmount and it said no. I suddenly got an error 4 and trying to run a check, and it aborts with can't cause mounted.
View 10 Replies View RelatedI have recently installed Debian on my NAS server. I have also configured Samba for sharing the home directory of a nas user i.e. /home/nas To this directory I have read/write from a windows machine using the nas user credentials.
When I mount my RAID partition /dev/md0p1 to the /home/nas directory, I then realize that all content in this directory (files and subfolders) is only owned by the root user. When trying to access from the windows machine the /home/nas directory, I do not have any write access, only read. I have tried both the nas and the root user credentials.
I have also attempted the change the ownership of the mounted RAID partition to the nas user with the -R recursive option, but I get for the internal files/subfolders an error "operation not supported".
How can I overcome this problem?
- Is there something not done properly in the /dev/md0 array definition (i.e. ARRAY /dev/md0 level=raid1 num-devices=2 UUID=bddf8b69:c97967b5:cb104784:7fef7cc3 )?
- Is there something not done properly in the /dev/md0p1 mounting (i.e. mount /dev/md0p1 /home/nas)?
- Should I do any extra configuration before the mounting etc?
I have two partitions in LVM. They are added in /etc/fstab to mount automatically. But, they are not working. The process to mount partitions seems to be happening before the service /etc/init.d/lvm2 is started. I can get it mounted using "mount -a" command, but not during the boot time. What should I do get it automatically mounted on every boot?
View 5 Replies View RelatedI'm not sure if this is a bug in Squeeze beta 2 or if it's something I've overlooked. I have a Maxtor 250 GB external USB drive that I use for backups. It gets auto-mounted fine, always in the same place, and from my normal user account I can write to it, even delete directories on it if I want to. But when, from Gnome, I select the "Safely remove" option, I get an error to the effect that it can't stop the device. The weird thing is that the thing actually *is* unmounted. I've checked the mount point and it's no longer there.Is there some package I maybe should've installed but haven't? I'm not really worried about data loss, since I'm sure the drive wouldn't unmount unless it was properly synched; it's just the error message that bugs me.
View 2 Replies View RelatedI have a sony x10mini and it is correctly seen in nautilus and shotwell. But nor in banshee 1.6 (testing and sid) nor in 1.9 (experimental) is mounted. Fact is that I know it works for sure in fedora and debian so I wonder if it a problem of some dependency missing, configuration or permissions. I use the testing distro by the way...
View 11 Replies View RelatedQuote:
Currently when I insert a removable device, it is auto-mounted as readonly. To use it I have to do this every time.
Code:
sudo umount /dev/xxx
pmount xxx
This applys to every removable device I have, and did not exist on my previous distro. Debian amd 64 Squeeze [URL]
I am using Gnome and Squeeze. I am wondering if I have a problem of understanding, or a problem that I found with Gnome.
My configuration is with a 3 hard disk system.
disk1 (Debian)
disk2 (XP and Fedora)
Disk3 (W7 and a Data partition)
When I boot and log in, all partitions for disk2 and disk3 are mounted read-write. Only by going to command line am I able to unmount the drives with the following sequence
cd /media
umount *
umount *
I should be able to mount and umount a drive by providing or responding to a root password. But I am not given the option to present a password. My request is blocked.
I also do not want to see the drives remounted after a boot. I tried to find out how this was managed, but I was unable to discover the module and it's parameter list that controls or does this task.
I am trying to find out the command to list all the devices mounted at boot-time.
View 5 Replies View RelatedMy primary repos are DVD .isos on my hard drive loop-mounted in /etc/fstab. Although I can install packages just fine and there are no issues with running installed applications, I must have screwed up the configuration of /etc/apt/sources.list because I get this output when I do apt-get update:
Code: Select allIgn file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
[Code] .....
Here is my rather primitive but functional /etc/apt/sources.list:
Code: Select all# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
deb file:/dvd1 jessie main contrib
deb file:/dvd2 jessie main contrib
deb file:/dvd3 jessie main contrib
[Code] ....
So what exactly have I screwed up?
Debian if I suspend the PC, will the external mounted harddisk safely umount automatically? I want to make sure that the integrity of my external HDD is not compromised while the PC goes in the suspend mode.
View 4 Replies View RelatedWhen I plug in my external USB Hard drive which is formatted as a single NTFS partition, it is recognized and mounted automatically, a nautilus window pops open. Unfortunately it is not writable. The reason is: the partition is mounted "ntfs" (which lacks write support) instead of "ntfs-3g". This is the output of mount after plugging in the drive:
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type ntfs (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,dmask=0077)
I want this partition to be writable by just plugging it in.
The partition should not have any errors because a) I fsck'ed it windows and b) mounting it manually works:
$ sudo mount -t ntfs-3g /dev/sdc1 /media/disk_/
$ mount | grep sdc1
/dev/sdc1 on /media/disk_ type fuseblk (rw,allow_other,blksize=4096)
$ devkit-disks --mount-fstype ntfs-3g --mount /dev/sdc1
Mounted /org/freedesktop/DeviceKit/Disks/devices/sdc1 at /media/4EBC5FB82435B0EE
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
$ gnome-mount -nbtd /dev/sdc1
$ mount | grep sdc1
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
How can I get ntfs drives to be mounted as writable by default, preferrably without having to modify fstab?