installed debian yesterday my problem is when running debian lenny on a gateway t1628 laptop, my computers hard drive is always spinning when running debian andt caused the computer to over heat and shut down automaticly.At least I think its the hard drive. when I use vista I don't have this problem. It has over heated a few times but I was running a lot of processes and had the hard drive loaded with a bunch of resource hogging programs.I'm running the amd64 architecture. I also haven't been able to configure the network yet. I had problems with that on the install but I need to take one problem at a time and being able to run for extended periods of time is first and formost.
I'm affraid that the compiz forum might be dead already because of the massive spam there.. just found an old laptop @work i could now use for private stuff so i decided to install debian-squeeze + compiz (which i've first seen on a knoppix-cd in combination with lxde i think).So far... it's an Acer TravelMate 291LCi:Pentium M 1.4GHzIntel 855GM chipset'Modified' 60GB HDD (normally 30GB)256MB DDR SDRAMMy first steps -> I found out that squeeze got no xorg.conf :/ ... X -configure brought me some probs after i tried a different how-to's... so all ended up in a mess... :at-wits-end: Second step -> Brand new installation of debian squeeze-> booting Knoppix-CD and copied xorg.conf from knoppix to hdd...Then followed this How-To: http://www.surlyjake.com/2009/08/compiz ... n-squeeze/and installed compiz + ...Also checked customized xorg.conf I copied from Knoppix -> O.K! :dance:
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
How much should I consider allocating if I wanted to go a bit beyond a "Live CD" experience but not quite as far as making it my A-1 Linux? My first experience with Linux (or Unix) and GUI together was LinuxPPC on a 603e Mac clone. That was on an 8GB drive (that used to call a RAID server its home, incidentally). Then I had OS X, versions 10.1 and 10.2 on a G3 iMac (40GB boot drive), followed by OS X 10.3 Jaguar on a G4 Dual 1.25 MDD. The power supply died on that -- a $300 item when you can find one with the right pinouts.
In x86 land, on this Lenovo M55p (80gb boot, 1GB RAM, Windows XP Pro SP3 as the primary installed OS), I've sampled GNOME and KDE thanks to Wubi installs that were 15Gb and 25Gb, respectively. I also have an IBM Thinkpad T54 (1.25GB RAM, also 80GB boot) onto which I've installed Ubuntu 9.04.
I understand that Debian has no Wubi counterpart; that it runs strictly on X-ready file systems (Ext2, Ext3 come to mind as examples with which I am vaguely familiar). I have also heard, often enough to start believing it, that Ubuntu and its K & X variants are derived from Debian. I get the impression, however, that for a decent install of it, somewhat more than 15 or 25 GB may be required.
I have just set up a high available San with 2 nodes which run on debian 7.
Replication and high disponibility works fine but i have some problem with iscsi.
I have create on 2 windows server 2012 1 iscsi iniator on each, my problem is when i create a file or a directory on one server, I have to put the hard drive offline then online and the change appear but it's not really useful.
So i would like to know if there is a way to automatically do this.
I have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
Trying to go through some old hard drives I'd saved from a Mac we tossed years ago. Using a Sabrent USB adapter (USB-DSC9) I connected it to the Debian box and it mounts as /media. Here's the weird thing: although I can read all the random stuff, the directory with all my actual documents shows up as "you do not have the permissions necessary to view the contents". When I try to fix this with chmod, it tells me that the drive is read-only. Grr.
How do I mount the drive so that it's not read-only?
I notice a bunch of weird what appear to be hard drive related error messages on my Linux server:
May 16 19:07:38 ghost kernel: [ 3495.452698] ata3.00: configured for UDMA/33 May 16 19:07:38 ghost kernel: [ 3495.452706] ata3: EH complete May 16 19:07:40 ghost kernel: [ 3497.380640] ata3.00: configured for UDMA/33
[code]....
I don't know if this could be an indication that my hard drive(s) are about to fail. Can someone tell me if there's a way to test the drives or understand what's causing this error?
I have a 500 GB drive that has a bad "place" at the beginning of the drive. It affected both the MBR and the first 40 GB partition. I just installed a 1 TB (why not?) replacement, but I'm wondering if I can get some future use from the bad drive.
I recall there are programs that will identify and lock out bad sectors on a drive, but I can't remember any specific names. Does Linux have such a critter? Is the MBR in a fixed location on a drive, or could such a utility lock out the bad MBR and allow the creation of a new one in good space?
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
i just burnt a debian lenny 504 live disk. i don't think there's a way to install it to hard drive. i just did a google search and it appears that the latest debian lenny 504 cannot be installed to hard drive with the live cd. from what i have read, i need to get a "netinstall" iso (this is new territory for me). can anyone supply me with a link for an iso with a hash verification? i would be most grateful. the disk i had previously must be corrupted because the install quits at 5%.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
My laptop has only Debian on it. Except for /boot, the entire hard drive is a giant encrypted LVM partition. It takes Clonezilla 13 hours to back up to a USB hard drive without verification, long enough to make sure backups aren't done much. Is there some way to make an encrypted bare-metal backup of only what is used (except swap) instead of every sector? Backing up across the LAN would be ok.
I have got a 1TB USB hard drive, which I partitioned to be 500GB NTFS and on the other half I installed Debian 8.1.0. During graphical install I selected to install the bootloader not to the MBR but also to the external drive. After completing the installation I wanted to boot into Debian, but it just started Windows, which is installed on my internal. Even after choosing the USB drive in the boot menu, Windows booted. I later installed the bootloader to my internal, then I could boot into both Debian and Windows, but only if my hard drive was plugged in.
I am trying to install Debian onto an IBM ThinkPad 240X. The 240X will only boot from either an internal IDE hard-drive, or an external floppy-drive. For now, I have decided to ignore the option of using the floppy drive. I have other computers to support the process, an IBM ThinkPad T43p (Pentium M) as well as my primary laptop, a ThinkPad X200s (Core2 Duo). I have tried installing the hard-drive to be used into the T43p, then booting the Debian NetInstall from a USB thumb-drive, installing as usual, then transferring the hard-drive into the 240X. This does not completely work; GRUB and LILO will load, but the computer freezes very early (almost immediately) in the boot process.
Please note, I am trying this on a CF card. The 240X has an IDE-CF adapter, and my X200s has a USB-CF reader.So, I want to try to load the actual Debian Net Install on the 240X. Ideally, it will happen something like this; I will partition the hard-drive into these 2 partitions:
sda1: the Debian Net Installer sda2: an empty partition waiting to have Debian installed onto it URL...
but the part I do not understand is how to get GRUB or LILO installed onto the CF card. I am wary of running commands such as "grub-install" as I do not want to mess up my GRUB install on the computers this command would be run from. If I run a command such as this, I would want it to ingore everything about the computer it is being run from, and only modify files or install onto the CF card. I would not want it to acknowledge the computer it is being run from as far as available installs, architecture, etc.
I have a 2TB external Hard drive that nonetheless is being used for booting Debian off of. I have downloaded the "debian-8.3.0-amd64-netinst.iso" and have extracted it to my external hard drive. The letter assigned to this drive is "I". When I shut it down and enter the boot settings, it asks me for a name and a path for a new boot option. I have tried many different paths including:
I renamed the original Debian download (debian-8.3.0-amd64-netinst.iso) to "debian" so I didn't have to type the long file name into the path. When I type in "I:debian.iso" as the path and restart it pops up with a grub prompt, in my mind that tells me that some part of the debian.iso file is corrupted.
Specs: Dual Core i5-3317U, 1.7 GHz, Turbo boosted 8GB RAM 1TB Internal Memory 64-bit OS and processor Windows 8.1 Default OS
Device Boot Start End Sectors Size Id Type /dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA) /dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
I have a WD20EZRX (Green) 3.5" hard drive installed in an external USB3 case (Icy Box IB-351StU3S-B), which is detected as an AS2105 device in Debian 7 (Linux 3.13 from back ports). My computer is a TP X200s. The problem is that the hard drive does not spin down even with hdparm -S timeout set and the file system unmounted. It does spin down with the hdparm -y command, though, and stays that way until accessed. The case also seems to prevent the TP entering standby mode, or at least the indication light is left blinking when the lid is closed. Other than this, the drive works fine. It does have a GPT partition scheme and ext3 file system.
The CDROM/DVD drive in the new computer was defective. Everything is working now.
My ancient Dell desktop finally kicked the bucket but the hard drive was relatively new (less than a year old).So I replaced that old desktop with a new desktop (not Dell this time) and decided to just plug in the old hard drive - to see what happens.Well, I was pleasantly surprised when Debian booted up and executed as normal (ok then, ALMOST normal)!
The problem is that the CDROM/DVD-RW is not recognized.For example, I have an audio CD in it, but neither file managers or multimedia players can see it (where 'it' is either the CD itself or the CDROM device).
I've tried GUI applications like mplayer, kplayer, Vlc, dolphin, pcmanfm; and I've tried the command line as well (bash).Short of doing a complete reinstall of Debian, is there a way to get it to recognize this 'new' hardware?
You know the great thing about having a debian system is that you have to reinstall so rarely you miss all the new changes that happen in the system until you have to do something like install a new piece of software and realize that fstab has been turned into spaghetti and you no longer have the slightest idea what is going on.I just got a new 1TB USB2 drive to use for backups. I plugged in it and it was recognized fine but it was formatted in NTFS which I didn't particularly want so I reformatted it as ext4FS. It automounts fine but only with all permissions set to root. I tried doing a direct chmod on the drive but that wasn't recognized. Where in the hodgepodge of HAL settings and whatnot do I set it to make the drive user accessible and mount to somewhere other than /media/disk?
