Debian Multimedia :: Scribus Crashes When Editing Text In Layout Mode

Sep 29, 2015

I use Scribus for designing leaflets and broshures. Unfortunately with the most recent version in the stable branch the program crashes each time I try to edit text in layout mode. I didn't have this problem in older versions. So I wonder if this is a bug others noticed in Scribus 1.4.4 on Debian GNU/Linux 8 (jessie) 32-bit.

For normal text editing I use the text edit mode anyway but when I try to fix line breaks it's always hard to not instantly see what I am doing. So even if I just want to insert a single character the program crashes with the following message: Scribus crashes due to Signal #11

View 3 Replies


ADVERTISEMENT

Debian Multimedia :: Scribus Crash When Editing Text

Jul 20, 2015

I use Scribus 1.4.4 without any changes from the Debian stable repository.

Each time when I edit text in the layout mode (not in the text editor) the program crashes with a "signal #11" message:

Code: Select all$ scribus
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
Scribus Crash
-------------
Scribus crashes due to Signal #11
Calling Emergency Save
Segmentation fault

On Wheezy I was using Scribus also, but without such problems. Unfortunately I often need to use the text editing in the layout mode in order to adjust the text flow for the final layout.

View 2 Replies View Related

Fedora Installation :: No Custom Layout Of Partitioning In Text Mode?

Dec 27, 2009

Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?

View 2 Replies View Related

Fedora :: Using Scribus In Editing Work Of Fiction

Dec 21, 2010

I am transferring from Word into Scribus a 20 chapter novel and would welcome some guideance. There are no images, only text. I do have the Scribus Offical Manual but find sections of it confusing. Can someone give me some guidance on:use of Master Pages. Do I have to set up a separate one for each chapter? Will this allow me to insert page numbers in the header area?Will I have to link the text frames (pages) of each chapter?

View 10 Replies View Related

Debian Multimedia :: Compiling Scribus 1.5 From Ubuntu PPA Source

Oct 20, 2015

I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?

Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
  Unknown CMake command "QT5_WRAP_CPP".

-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
  Unknown CMake command "QT5_WRAP_CPP".

-- Configuring incomplete, errors occurred!

View 14 Replies View Related

Ubuntu Installation :: 10.10 Installer Crashes With Black Screen - Even In Text Mode

Oct 23, 2010

It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.

Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!

Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.

Here are the specs of the system if it can help:

CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard

Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.

My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.

View 5 Replies View Related

Debian :: Unreadable Characters In Console Mode And In Keyboard Layout?

Oct 10, 2010

I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.

EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of ç I get a weird symbol.

View 2 Replies View Related

Ubuntu Multimedia :: Video Editing / Text And Reverse

Apr 9, 2010

I'm trying to reverse a clip in kdenlive and add text on top of the moving clip, but cannot figure out how to do it..anyone know how or a program that can?

View 2 Replies View Related

Ubuntu Multimedia :: Firefox Crashes When Flash Used In Fullscreen Mode - After Upgrade To 10.04

Jun 1, 2010

i just upgraded to ubuntu 10.04 from 9.10, and now i can't view any flash video in fullscreen mode (videos, atdhe, etc.). when i click on fullscreen firefox crashes instantly. everything was working fine in 9.10.

i looked around on the forums; i tried to install the flash-aid extension for firefox. it says that my architecture is 32bit, then reinstalls the flash plugin, but that doesn't help; fullscreen still crashes. i also tried to install the 64bit version from adobe's website, but that doesn't help.

i had a look at the mozilla website [url] i tried to preload the libgl.so.1 library as suggested there, but that doesn't help. i wanted to try to disable hardware acceleration in the flash player settings, but i can't even change the settings; when i right-click on settings, the adobe small preferences screen appears but i can't click on anything, nothing works.

that's all on ubuntu 10.04 with firefox 3.6.3 and flash player 10,0,45,2. i also installed the newer 10.1 flashplayer plugin from the adobe website, but firefox still crashes.

View 9 Replies View Related

Ubuntu Multimedia :: Latest Flash Plugin Crashes In Full Screen Mode?

Nov 5, 2010

After update of adobe plugin to version 10.1.102.64 (10.1.r102) plugin crashes if I try to switch to full screen. Previous plugin (10.1.53.64) worked perfectly well. Anybody with the same problem? My system is System76 Gazelle, Ubuntu 8.04 with all latest updates, nvidia drivers.

Additional info:

1. Same effect in Google Chrome, which uses its own plugin 10.1.r103

2. Same effect (both in Firefox and Chrome) on Thinkpad T41 with ubuntu 8.04

I downgraded plugin to r53 for now, but it's not a good idea, last update fixed some security issues.

View 9 Replies View Related

Debian :: Text Mode Power Management?

Mar 16, 2011

I recently converted a Toshiba Satellite A75 notebook with a broken screen into a minecraft server that me and my friends will be using at UAB. It's currently running the latest version of Debian in text-mode with a few shell scripts that backup files and update a webpage at specified times.

The server runs fantastic ( though it's currently on my home network so no one can join it unless they are on LAN ) but there is a minor problem. I took a look at the backups from last night and it seems the server shut down around 10:00 in the morning because the laptop went into sleep/hibernate mode or something like that. I'm not sure what's causing this exactly but I think it's some setting in gnome-power-manager, but I can't run it in text mode.

View 3 Replies View Related

Ubuntu Multimedia :: Control Fan Speed When Running Text Only Mode?

Aug 23, 2011

I often run my ubuntu as SSH server only so i stop GDM when i do that, but i found out that after i stop gnome, my ATI gpu fans spins up like crazy and sounds like a jet plane, (i have ati closed source driver installed) i am worried to leave the fan on like that, so i have to start a X session again. Then the fan slows down I would like to be able to have slow fan speed when i drop to text mode only, one is its light weight, two is for security

View 3 Replies View Related

Debian :: No Dircolors Over SSH And Text Mode With Xterm-256color

Oct 14, 2015

When I login over ssh or when I open a local text shell I can't get dircolors to show up.

If I open a shell in an X-Session the dircolors are there. Also, colors work fine over text mode and SSH, in both of them VIM works perfectly fine with my colorfull configurations.

This is the session I get when I do a remote login over SSH:

Code: Select allremote ~ % echo $TERM
screen-256color

View 1 Replies View Related

Debian Multimedia :: Dvorak Layout Not Always Working With Ctrl Key

Jun 23, 2010

I use programmers' dvorak. All the keys are correct when typing normally. However, the ctrl+(key) shortcuts do not always work correctly.My shortcut for opening a new terminal is ctrl+alt+t. Sometimes this works correctly, but at other times, it reverts to the qwerty. The change only seems to happen at reboot.

View 7 Replies View Related

Debian Multimedia :: General Way To Switch Keyboard Layout?

Nov 22, 2010

What is the general way to switch the keyboard layout?
What works for me currently is the custom Section in /etc/X11/xorg.conf.d/kbd.conf.
However this section must include Option "Device" "/dev/input/by-path/..." which identifies the current keyboard. This works fine for my laptop keyboard.
However when I attach USB keyboard, keyboard switching does not work.
I also found somewhere it should be done via /etc/default/keyboard, but that does not work for me at all.

View 2 Replies View Related

Debian Multimedia :: Can't Change Keyboard Layout In Gnome 3 Classic

Jun 2, 2015

I installed Gnome 3 Classic but I can't change my input source.in Gnome 3 I can but in Classic version I can't. In Gnome 3 I can see it beside the Clock but In Gnome 3 Classic it doesn't exist. How can I enable it?

View 0 Replies View Related

Server :: Change From Graphic Mode To Text Mode In CentOS 5.3?

Sep 14, 2009

The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?

View 1 Replies View Related

Debian Multimedia :: Enable Keyboard Layout Indicator In Gnome 3 Classic?

Jun 4, 2015

How can I enable "Keyboard layout indicator" in Gnome 3 Classic?

View 0 Replies View Related

Fedora Installation :: F15 Installer Crashes While Writing Partition Layout

Jul 28, 2011

Trying into install fedora. I am setting up my system as a dual boot over two drives. I have set up a custom layout and whenever I get to the step to write changes to disc it crashes with an unhandled exception. I have tried multiple times now, it always crashes.

Here is the first line from the exception report:
anaconda 15:31 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packagees/pyanaconda/storage/devicelibs/swap.py", raise SwapError("swapon failed for '%s'" % device)

View 10 Replies View Related

Debian Multimedia :: Editing GNOME3 Applications Menu

Sep 29, 2015

I am running debian 8 with GNOME3.14 with the Applications menu extension and i want to know how to edit the listings and all that stuff ... Also is there a support IRC?

View 2 Replies View Related

Ubuntu :: Pitivi Crashes - Video Editing

Apr 7, 2011

Pitivi crashes when I import a video to the timeline, tried with diferent formats and mp4 mostly, it's also not that good... I needed to do some things that I used to do with Vegas but with any success. Cinelerra looks like crap and prompts a lot of errors I need a really GOOD video editting tool.

View 3 Replies View Related

Programming :: Editing Text Using AWK?

Jan 11, 2010

Code:
echo -n "Title:"
read Title

[code]...

View 12 Replies View Related

Ubuntu :: Editing Fstab In Recovery Mode

Feb 5, 2011

I have made an entry in fstab that is keeping me from booting. I am able to get into recovery either from entering "M" as it is trying to mount my bad entry or from Grub.

However once in recovery I am unable to save my edits in vi. I have tried several attempts at saving my edits to no avail. What trick will I have to impose in order to clean up my fstab so I can boot successfully.

View 4 Replies View Related

Fedora :: Editing A 26 Gigabyte Text File?

Jul 15, 2009

I did a pg_dump of our data warehouse, and it is 26 gigabytes. I wanted to load this data into a different database product (one that forked from Postgresql, so its syntax is very similar).I needed to change the syntax of the "COPY" command in the pg_dump output, remove references to "public", and change the table owner name. sed did these for me (albeit slowly). The output from pg_dump is a file called "pg-dump-output.sql".

pg_dump produces this:
Code:
...

[code]...

View 4 Replies View Related

General :: Text File Column Editing

Jul 17, 2011

I have 2 large text files , one looks like this:

<contact type="1">blahblah@hotmail.com</contact>
<contact type="1">blahblah2@hotmail.com</contact>
<contact type="1">blahblah3@hotmail.com</contact>

The other is a list of emails in single column format like this:

emailaddy@hotmail.com
emailaddy2@hotmail.com
emailaddy3@hotmail.com , etc

Is there a command to delete all the blahblah emails from text file 1 and replace them with the ones from text file 2?

Or maybe a linux version of 'Csved' which has the ability to add,remove,insert columns?

View 5 Replies View Related

Programming :: Editing Text Files With Information From PostgreSQL DB?

May 16, 2011

Is there any way to edit text files with information in a database? The file is supposed to be always the same.. the information is going to be addedd in a specific format

View 2 Replies View Related

Debian Multimedia :: Multimedia Crashes On Squeeze ?

May 13, 2011

I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.

Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -

Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.

View 3 Replies View Related

General :: Text Editing Remote Edit With Local Editor

May 26, 2010

I have a server I can ssh into, and I am also running Ubuntu. How do I edit this remote file using any program I have installed on my local Ubuntu, without copying it to local, editing it, and copying it back?

View 4 Replies View Related

Red Hat / Fedora :: Unusual Grub In Minimal Bash Like Line Editing Mode

Jun 14, 2010

I have installed RHEL5, solved the problems around it and started to set up the GRUB. I have set the menu.lst with simple
rootnoverify (hd1,0)
mkeactive
chainloader +1

and tried to boot the Win7 on that partition. NO LOADER came up and since that moment
Grub is only in "Minimal BASH-like line editing" mode. I have tried all of I have googled, nothing have worked. There is a problem with even finding /boot/grub/stage2, or anything else, grub won't let me mount any partition. When I try to find any file, it says file not found. It is important to say that all I did to cause this was change in menu.lst
rootnoverify (hd1,1) to rootnoverify (hd1,0)m nothing else! There is no logic in this....

View 9 Replies View Related

Debian Multimedia :: KDE Crashes On Startup

Mar 28, 2016

I am new to debian. I run debian on a laptop with nvidia geforce chip 740 m (optimus), it has been working great until today when i turned it on , the start screen did not show up and it went straight to terminal mode. Starting the kdm service manually does not do anything.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved