Like the subject says, the whole system just hangs at gdm startup. No mouse or keyboard response. Didn't have this problem with lenny. My guess is there might be a problem with the graphics drivers. The box has ati rage 128 pro graphics card.
View 4 RepliesFound this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies View RelatedI am trying to install webmin on my Debian virtual machine and it is not working.
Here is what i am following [url]
I ad the 2 lines to /etc/apt/sources.list I ad the key ok But when i do apt-get install webmin it goes through everything ok as far as i can see, except when it gets to " **initializing cache. This may take a while **Setting up webmin (1.550) ... " It is like it just stops doing anything, it just hangs there.
If i reboot and try "dpkg --configure -a" it starts at the same place "Setting up webmin" but nothing is happening.
I wanted to customize my debian a little bit by adding a startup sound but I can't figure out how.
I'm using Gnome and Debian 6 Squeeze
i just installed Debian on one of the computers in the house and nobody likes being prompted for a password so i want it to login as a normal user without requesting a password on startup. how do i do this
View 13 Replies View RelatedHow can I restore or reinstall GRUB2 from squeeze installation? I tried various suggestions from various online articles (most of them for ubuntu), but I couldn't find a solution. Is there any solution, specifically for Debian? GRUB reinstallation from install cd, didn't worked as well. Since I couldn't boot at all, I restored GRUB1 and I'm posting from Lenny, but I can't access Squeeze this way (probably because I have squeeze's partition, ext4 formatted).
View 5 Replies View RelatedHow to change gnome startup background under squeeze? I mean the beackground from user login mask.
View 3 Replies View RelatedThis one has been bugging me for some time now. The network interface (as defined in Debian's /etc/network/interfaces file) fails to obtain an IP address from myuter. However dhclient br0 does.I'm using br0 since I run a XP virtual machine.network/interface changes are from a Debian howto on setting up the tap interface.As near as I can tell, the /etc/init.d/networking script basically calls /sbin/ifup -a. ifup is a binary.My /etc/network/interfaces file is:
auto lo
iface lo inet loopback
address 127.0.0.1
[code]...
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
Below is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedI have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
I have a brand new 3CD opera and two of the tracks on the last CD will not rip.
I have tried on two different machines with the same result. (Grip/cdparanoia)
The tracks appear to play OK on CD player.
Any solutions available?
Can I return disks as faulty?
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedI've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
I am on Debian Wheezy+Xfce and I bought an external WD 3TB Hd (not yet formatted).
I wanted to prepare it to store all my videos and pictures, but to my surprise, when I opened Gparted to format it, it showed only 746GB.
How can I make my OS recognize the HD in all its size?
My system is amd64, on a 64bit Packard Bell imedia S3210
i insalled Squeeze recently but i dont have aby sound in my system, in preference>sound> my speaker volum is up too
and alsa-pase also installed ,
what i could install or check for having sound ?
I have successful installed debian squeeze 32bit on my pc. I like very much The vlc i have installed via software but After install vlc don't start don't appear don't do nothing any one know there is a problem with Vlc On squeeze?
View 10 Replies View RelatedRecently I installed Debian Squeeze - 2.6.32-5-686 but I found problem with my TV OUT again. Before I had the same problem but I found decision here with this patch and everything was OK. Now I have the same problem with new NVIDIA driver (275.09.07) and Debian Squeeze. I tried older drivers but nothing. My video card i NVIDIA - 9500GT.
View 2 Replies View RelatedI have a computer that is off the internet. It usually works right since I took great care to make it as 'clean' as possible from outside forces.Lately it just hangs whenever GDM is about to start.How to troubleshoot?
I tried a live CD SystemRescueCD, it works even the desktop environment works. so I e2fsck the partitions of the hard drive okay, memory test/checked the 1.2GBRAM -- passed other than these, I have no clue how to troubleshoot.Oh, I also used an nvidia driver which I forgot how I did it because it was installed almost a year ago.
Thunar, for some reason, always seems to become non-response and consumes 100% CPU after I open a certain folder on my external hard drive. What could be the cause of this? I've tried opening the same folder on Windows and it didn't give me any problem, so I'm assuming that the problem lies within Thunar, and not the external hard drive itself.
View 3 Replies View RelatedAfter unsuccessfully trying to install some updates on my debian squeeze system, I can no longer login to gnome when I restart the system. I've tried logging in both as root and as user and have typed in 'startx' or 'gnome-session' at the prompt but I get an error message "**(gnome-session:12020): WARNING **: Cannot open display:". I've searched the web for solutions but nothing works. I've had my debian squeeze for over three years now with no issues.
View 14 Replies View RelatedI blacklisted the pcspkr module on my system(rebooted and confirmed it no longer loads). The majority of annoying beeps are now gone. I have 2 instances where it still beeps though. Whenever GNOME first starts(before I login though) and if i am in GNOME at a terminal and type reboot. Any thoughts on disabling this?
View 11 Replies View RelatedOn a fresh install of squeeze, I can't log in to an AIM account with being immediately disconnected and given this error: You have been connecting and disconnecting too frequently. Wait ten minutes and try again. If you continue to try, you will need to wait even longer.
I waited for several hours before trying to reconnect, but got the same message. Searching for the error led me to some bug reports from upwards of three years ago.
Strangely, this error hasn't occurred on any of my other squeeze systems.
I can ping login.oscar.aol.com as well as login.messaging.aol.com; both resolve to 205.188.251.43 for me. I tried changing the "Server" under "Advanced" to this address, but again I got the same error.
I'm a Linux User since 2007. Later, i was an Ubuntu Fanatic User. But my computer is old, and Ubuntu is more slow in every version.
I'm from Valencian Contry, and I speak "Valencian" or "Catalan"
How I install XMMS on Debian Squeeze???
I think i came across a bug in X server in squeeze. I would report it to the bug tracking system in debian packages but the think is I am not entierly sure about it.When i start X (whether it is through startx or service gdm start or auto startup through init when the pc boots) the computer PC seems to lock up.The screen goes black right after X initializes and before anything is show in the screen and if i wait a about 10 minutes the monitor either goes in standby or out of range. PC seems unresponsive to both keyboard commands and mouse but my LCD screen in my G15shows the time skips 1 sec every 2 sec (from 19:22:22 goes straight to 19:22:24).
I have a custom 2.6.33 kernel which i build but it happens with both 2.6.32-trunk and 2.6.32-3 offical kernels from the squeeze repository so i dont think that this is the problem.My PC is a P4 3.75Ghz with 2Gb RAM and an NVidia 6800GT with the binary drivers from nvidia. I have tried diffrent versions from my grapgics drivers (NVIDIA-Linux-x86-173.14.25-pkg1.run & NVIDIA-Linux-x86-195.36.15-pkg1.run) with no change in the behaviouThis is the syslog from the time my pc started and then "stuck". I left it for some time before i hard reset it
I've tried a few threads about install flash and haven't found the correct one.What is the correct way to install Flash on Debian Squeeze 64bit?
View 14 Replies View RelatedTried to install aMSN using Sid package... can't do it because no TK8.5. Installed TK8.5 and aMSN, now I get another strange message ...
Error in startup script:
OK ...
Let's check out 'Empathy IM Client' , no longer any support for MSN because ...?
Tried to setup Mercury which needs Java. Go to run Mercury, no java!
Had to set up Pidgin so that I could go on msn!
I recently did a fresh Debian Squeeze install.The problem I have is that I cannot play any video. I tried opening mpg, flv and mov files with totem and vlc and they crash instantly.I think I have installed the packages (codecs, players, etc) required for playing videos.
View 13 Replies View RelatedI have just installed Squeeze and my xfce works, but I don't get a panel, unless I start it manually withxfce4-panel &As this worked,ded it to the automatically started applications. I logged-out and then back in but no panel. I did a ps -ef | grep -i paneland the panel doesn't appear to be running.
View 4 Replies View Related