Debian :: Installing Drivers For Radeon Hd4350 ?
Jan 30, 2010
I just built myself a new 64bit computer, but I'm having a little trouble getting it going. At first I put windows 7 on it, but it requires 1gb of RAM just to run it's basic programs, and it's all bogged down with all these useless programs, and when I tried to turn off some programs to make it faster, half my stuff stopped working all together, because they required all these programs just to run other programs, it's just absolutely ridiculous.
So I looked into Linux, and after asking around a bit, I installed Debian. It's exactly what I want in an operating system, completely customizable, but I guess I've been spoiled by microsoft and I'm not that good with all the command lines and configuring the kernel.
Righty now I'm trying to get my video card going, but I can't even figure out how to get the drivers installed. I went to amd.com and got the drivers, but when I try to just put them in the bin, but it keeps telling me I don't have administrator priveleges, but I do. Then I tried following this manual wiki.debian.org/Manual-Howto#Atibinarydriver]Manual-Howto - Debian Wiki , but I got stuck at the part where it tells me to copy and edit my xorg.config. When I go to copy, it tells me the directory doesn't exist, but it does. And when I go to edit the xorg.config, it tells me I don't have priveleges again.
So is there any easy way to get my video card installed, or do I really have to create this new kernel and go through this whole long process? My motherboard has hybrid crossfire technology, am I able to use that with debian?
Here is what I have in my comp, in case the info is needed.
Debian Release 5.0.4 (lenny) Kernel Linux 2.6.26-2-amd64 GNOME 2.22.3
MSI KA780G mothboard
2x1gb ddr2 pc2-5300
AMD Athlon II 2.8ghz Quad Core 630
1gb pci-e radeon hd4350
View 5 Replies
ADVERTISEMENT
May 27, 2011
I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
View 12 Replies
View Related
May 27, 2011
I'm trying to install radeon 5770 drivers but it fails with this message.... same message when I use sgfxi
Code:
# vim /usr/share/ati/fglrx-install.log
1
2 Creating symlink /var/lib/dkms/fglrx/8.85/source ->
[Code]....
View 3 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Mar 9, 2009
I have a computer with an integrated graphics card. It is ati radeon xpress 200 series. It have installed OpenSuse 11.1 on my computer with KDE 4.1. I have heard that we have to manually install ati and nvidia drivers. Or can the open source drivers run my card. has the drivers for my card already been installed. Or should i install it manually. I donot have an internet connection on my pc. but i can download the required files from another computer and bring them to my pc.
View 3 Replies
View Related
Jul 20, 2010
I have ubuntu on a Vaio VGN-A290 with the ATI Mobility Radeon 9600 M10 graphics card. I I installed the Eternal Lands client but it keeps crashing on me. Upon crashing a massage told me that I should make sure the video drivers are up to date. I then went into system --> Administration --> Hardware drivers and it says "no proprietary drivers are in use on this system." So my question is how do I install a driver for the ATI Mobility Radeon 9600 M10?
View 5 Replies
View Related
Mar 14, 2016
i just migrated from fedora to debian, and i already love this system. it only seems that i am facing a serious problem with this graphic card.running on debian 8.3.booting my system, i do get this message:
[8.167619] [drm:radeon_pci_probe] *ERROR* radeon kernel modesettingfor r600 or later requires firmware-linux-nonfree.
after that the system seems to run normally except of the fact that it doesn't look well and i cannot set the appropriate resolution for my monitor.
lspci -nn | grep VGA output:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850] [1002:6739]
already tried both, the open source and the proprietary drivers, and both cause serious problems.
i tried to install the proprietary driver following these instructions: URL...
after restarting the system i get a black screen with a blinking cursor at the top left corner, and that's it.
then tried to install the open source driver following these instructions:URL...
but after restarting the system my monitor goes into some sort of a "sleep monitor mode", and that's it.in both cases i wasn't able to boot the system through the recovery mode, so i didn't know what else to do and re-installed the whole system each and every time i tried a driver.let's say i have installed the system like 5 times in the past 12 hours.
View 4 Replies
View Related
Feb 21, 2010
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
View 10 Replies
View Related
Apr 1, 2014
I'm using Debian Jessie. All the firmware packages are properly installed, and so are the radeon free driver packages.
However, Gallium falls back to llvmpipe, which from what I understand is a software rasterizer and not actually hardware rendering.
Everything works fine except some specific things like KDE's cube animation, which says it can't be enabled because it requires OpenGL.
How do I get Debian to run Gallium properly?
I attached some relevant info...
glxinfo | grep -i opengl
View 14 Replies
View Related
Jul 19, 2011
I've been on numerous websites--with tutorials telling how to install the ATI drivers, I'm running Squeeze 6.0.1 Gnome amd64, the tutorial I am using is located at the ATIProprietary Debian Wiki [URL] when I try the following:
sudo apt-get install fakeroot debhelper build-essential libstdc++5
I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package fakeroot is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source.
Package debhelper is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package 'fakeroot' has no installation candidate
E: Package 'debhelper' has no installation candidate
E: Unable to locate package build-essentials
E: Unable to locate package libstdc++5
E: Couldn't find any package by regex 'libstdc++5'
I have a feeling that apt-get is not searching the web, yet searching a CD perhaps? Because when I've tried the apt-get update, I get the following:
Ign cdrom://[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54] squeeze Release.gpg
Media change: please insert the disc labeled
'Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54'
in the drive '/media/cdrom/' and press enter
After doing that, nothing happens, and my apt-get still doesn't work, everything I try and install like build-essential says it's not found. Also when I
su
nano /ect/apt/sources.lst
the list in nano is empty???
I'm currently running a dual boot with windows xp/debian but as soon as I can get everything working, I'm going to turn this into a full linux system. Also my sound doesn't work, but my sound is HD sound that goes via the video card, I have it hooked up HDMI to my LG tv/monitor, sound works fine on xp. I think once I get the video card drivers installed it should possibly fix my sound issues at the same time.
View 14 Replies
View Related
Oct 17, 2015
I have two monitors, a primary crt which I usually run at 100-160hz depending on the resolution, and a secondary lcd which I run at 144hz. I can't set either to anything above 60hz or any respectable resolution.
I'm running debian 8 with gnome. Apparently I can't use propietary drivers with gnome because it isn't supported and I have to use the open source ones. So I used this website as a guide to install drivers: [URL] ....
I tried:
1. Code: Select all# Debian 8 "Jessie"
deb http://http.debian.net/debian/ jessie main contrib non-free
Which gave me nothing. First line didn't do anything at all, second one didn't work because 'deb' isn't a valid command.
2. Code: Select all# apt-get update
Worked as per usual.
3. Code: Select all# apt-get install firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
Only one installed, and that was xserver.The other ones failed (werent found or something?). Anyway as per instructions i rebooted and ofcourse nothing happened. I am pretty sure since step 1 was probably meant to add to the repository, step 3 wasnt able to complete.
But my concerns are...
1. How am I meant to do step 1 if it isn't a real command
2. Should I (or can I) change to something other than gnome, because I don't think its worth missing out on propietary drivers just to use gnome.
My card is a hd7970.
View 7 Replies
View Related
Aug 19, 2010
Yesterday I installed Debian "succesfully" (after some problems that were easily solved), but now I need some help with installing drivers and other stuff. I need to install the Conceptronic wireless card (rt61). I followed a guide I found on the Internet, but, when making the installation, Terminal gives me some errors.
make
make[1]: gets in the directory `/usr/src/linux-headers-2.6.32-5-amd64'
Building modules, stage 2.
MODPOST 0 modules
[code]....
Another thing I don't know if I installed correctly are the nVidia drivers. I think I installed them succesfully, because my graphics card is now quiet (when the drivers are not installed, it sounds like a nuke) and I have the nVidia settings installed, but... when I try to modify the resolution in Preferences/Monitor, I see "Unknown monitor" and "50hz refresh rate". My TV suports 75hz and when I installed Debian I had it at 75, but after installing the nVidia drivers, everything gone wrong.
I tried to update the xorg.conf with nVidia-settings, and now it says my monitor is at 75hz and it's a Phillips, but I still see Unknow monitor and 50Hz at Preferences/Monitor. Why does this happens? Also, my integrated sound card doesn't work. When I try to open a MP3 file, It opens correctly, but my speakers don't work. And the last thing is... Compiz doesn't work! Well, nothing about Desktop Effects work. I also don't know where should I set up those Desktop Effects (I know how in Ubuntu, but in Debian...).
View 3 Replies
View Related
Apr 10, 2009
I am following the instructions to install my AWU254 on debian4.0 and get the following...
cjtrim@debian:~/src/rtl8185_linux_26.1027.0823.2007$ ./makedrv
./ieee80211/
./ieee80211/ieee80211_module.c
./ieee80211/ieee80211_rx.c
[code]....
View 2 Replies
View Related
May 31, 2010
I'm using the liqorix kernel and have been updating when new versions become available. However, every time I install a new version and restart, I have to re-install my video drivers. I don't think this is normal, but I could be wrong, I'm basing my past experience on updating Ubuntu kernels. So is this normal? Is there a way I can prevent myself from having to re-install my video drivers every time I update my kernel?
View 3 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
May 27, 2010
I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.
View 9 Replies
View Related
Sep 10, 2015
According to this link [URL] , I should be able to install the package through experimental on Jessie.
View 9 Replies
View Related
May 2, 2011
I want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
View 14 Replies
View Related
Jan 19, 2015
I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...
Here you have my output...
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck
[Code] .....
View 7 Replies
View Related
Sep 17, 2015
I'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.
But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:
"failed to load session 'cinnamon'"
I cannot login as normal user or root.
View 1 Replies
View Related
Aug 4, 2015
My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
View 2 Replies
View Related
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
Mar 31, 2011
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies
View Related
Sep 1, 2011
I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:
libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb
[code]....
View 7 Replies
View Related
Jul 27, 2010
Has anyone successfully installed 3D drivers for HD 5750 on Fedora 13? I've tried ATI Catalyst 10.7 and mesa-experimental drivers, but they wasn't working.
View 11 Replies
View Related
Jul 20, 2011
Will the amd proprietary drivers in the repo, work with gnome 3 in Fedora 15.
View 3 Replies
View Related
Apr 18, 2010
I just installed Ubuntu 64 bit (I had 32 bit before) and I want to get my graphics card working. I have an ATI Radeon 5750 hd card. I tried to use the proprietary drivers from "hardware drivers" but I get a watermark in the bottom right hand corner of the screen and the resolution is terrible. Also, the whole screen seems to be vibrating, which kills the eyes, so I got rid of that driver.
I also tried to download and install the driver from ATI website [URL]... but ubuntu couldn't open the pakage. I gave me some error message about the "encoding text" or something like that. So how (if it's possible) do I get my video card working so that I can use compiz and run 1080 resolution? I have been through tons of threads but none of them helped my any.
View 8 Replies
View Related
Oct 13, 2010
My laptop currently is : [url]
Unfortunately I'm having trouble finding proper driver support for the ATI radeon x1200 as described by another poster:
You should still be able to get full 3D support for your hardware by downloading & installing the drivers manually.
This is where it gets complicated, unfortunately.
ATI dropped support for some "older" 3D devices some time back (actually not all that old in many cases - it made a lot of ATI card owners very upset). So I'm not sure which drivers you'd need to download & install to get your 3D hardware working.
The Radeon x1200 device in your notebook is, confusingly, not the same as a desktop Radeon x1200 card.
View 8 Replies
View Related
Jun 22, 2011
I just attemted the install for the Radeon unified drivers. Im running Ubuntu 10.04 with a X1200 series graphics card. 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] The setup seemed to go fine and I restarted as it suggested. but now when I attempt to open the new catalist control center application it gives me a message about not detecting any Radeon components or I need to configure them. Sadly this message isnt copy/pasteable.
View 4 Replies
View Related
May 14, 2010
Can anyone update me a little on the current styate of Radeon Drivers? I have a laptop with an RS690M video card on Slackware64 & Slamd64
There is
1. Kernel driver (drm/radeon.ko) but I am finding it difficult to find comments on it, except that it does some power management stuff
2. Proprietary fglrx had a recent significant update, and now talks to my card after a fashion (Experimental support)
3. OSS Radeonhd for X, which I gather is probably the worst atm but it's what I have in xorg.conf
4. OSS radeon driver, which is supposed to have more work done on it.
I don't need framebuffer stuff - the screen is hard enough for me to read as it is, but I do like to watch the occasional tv program or dvd and I'd like the video to be keeping up in full screen. ATM, Xvid, Opengl, and just about everything fails to, except sdl.
View 4 Replies
View Related
