Debian Hardware :: Installing The Drivers In Amd64?

Aug 19, 2010

Yesterday I installed Debian "succesfully" (after some problems that were easily solved), but now I need some help with installing drivers and other stuff. I need to install the Conceptronic wireless card (rt61). I followed a guide I found on the Internet, but, when making the installation, Terminal gives me some errors.

make
make[1]: gets in the directory `/usr/src/linux-headers-2.6.32-5-amd64'
Building modules, stage 2.
MODPOST 0 modules

[code]....

Another thing I don't know if I installed correctly are the nVidia drivers. I think I installed them succesfully, because my graphics card is now quiet (when the drivers are not installed, it sounds like a nuke) and I have the nVidia settings installed, but... when I try to modify the resolution in Preferences/Monitor, I see "Unknown monitor" and "50hz refresh rate". My TV suports 75hz and when I installed Debian I had it at 75, but after installing the nVidia drivers, everything gone wrong.

I tried to update the xorg.conf with nVidia-settings, and now it says my monitor is at 75hz and it's a Phillips, but I still see Unknow monitor and 50Hz at Preferences/Monitor. Why does this happens? Also, my integrated sound card doesn't work. When I try to open a MP3 file, It opens correctly, but my speakers don't work. And the last thing is... Compiz doesn't work! Well, nothing about Desktop Effects work. I also don't know where should I set up those Desktop Effects (I know how in Ubuntu, but in Debian...).

View 3 Replies


ADVERTISEMENT

Debian Installation :: Businesscard Amd64 Lenny CD Not Installing?

Jan 24, 2010

Using VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.

View 1 Replies View Related

Debian Multimedia :: Installing Cinelerra On Squeeze (amd64)?

Apr 25, 2011

I think about editing and compressing some avi files and want to install cinelerra-cv. However there are some dependency problems it seems...

aptitude install cinelerra-cv cinelerra-doc cinelerra-cv-data

The following NEW packages will be installed:

cinelerra-cv cinelerra-cv-data cinelerra-doc libavcore0{a} libavutil50{a} libfaac0{a} libmjpegtools-1.9{a} libmp3lame0{a} libmpeg3-1{a} libmpeg3hv-1.5.0-1{a} libquicktime1{a} libquicktimehv-1.6.0-1{a} libva-x11-1{a} libva1{a} libx264-112{a} libxvidcore4{a} mpeg3-utils{a} ttf-bitstream-vera{a}

The following packages will be upgraded: libavcodec52 libpostproc51 libswscale0 3 packages upgraded, 18 newly installed, 0 to remove and 5 not upgraded. Need to get 16.5 MB of archives. After unpacking 31.5 MB will be used. The following packages have unmet dependencies: libavformat52: Depends: libavcodec52 (< 4:0.5.2-99) but 5:0.6.1+svn20101128-0.2 is to be installed. or  libavcodec-extra-52 (< 4:0.5.2-99) which is a virtual package. The following actions will resolve these dependencies:

[code]....

Normally I say yes and hope for good, but this time... I do not use adobe flash player, but I would still like to watch ..... videos. Would be hard without gnash, right? I use iron portable and iceweasel. Also I use totem a lot, but aptitude seems not being able to resolve this inconsistency automatically. My question is: what would happen, if I just say "y"? gnash is completly away? And is there any way to install newer version of gnash or do whatever to have everything working?

View 2 Replies View Related

Software :: Installing Display Driver On Debian Lenny Amd64

Jul 8, 2009

I installed the new debian_lenny_5.0.1_amd64 x64, i am having a nVidia Geforce 8500 GT 512 RAM display card. I was trying to install the driver using the synaptic package manager. I installed them, but i was not able to use the driver. I don't know where the drivers are installed and how to use it. I checked the xorg.conf , and the nVidia driver is not listed there. how to install them .

View 9 Replies View Related

Debian Configuration :: FATAL: Error Inserting Pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No Such Device

Jul 31, 2011

I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):

Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device

[code]....

View 2 Replies View Related

Debian :: Installing I386 Packages Prompts Removal Of Amd64 Packages

Apr 8, 2015

I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is

Code: Select allapt-get install package-name:i386

prompts the removal of currently installed packages (amd64 arch.) which is the problem.

Code: Select allReading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  libportaudio0:i386

[Code] ...

Some of the packages I am talking about are

-libegl1-mesa-dev:i386
-libportaudio-dev:i386

Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?

View 1 Replies View Related

Debian :: Correctly Installing ATI Drivers

Oct 17, 2015

I have two monitors, a primary crt which I usually run at 100-160hz depending on the resolution, and a secondary lcd which I run at 144hz. I can't set either to anything above 60hz or any respectable resolution.

I'm running debian 8 with gnome. Apparently I can't use propietary drivers with gnome because it isn't supported and I have to use the open source ones. So I used this website as a guide to install drivers: [URL] ....

I tried:

1. Code: Select all# Debian 8 "Jessie"
deb http://http.debian.net/debian/ jessie main contrib non-free

Which gave me nothing. First line didn't do anything at all, second one didn't work because 'deb' isn't a valid command.

2. Code: Select all# apt-get update
Worked as per usual.

3. Code: Select all# apt-get install firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
Only one installed, and that was xserver.The other ones failed (werent found or something?). Anyway as per instructions i rebooted and ofcourse nothing happened. I am pretty sure since step 1 was probably meant to add to the repository, step 3 wasnt able to complete.

But my concerns are...
1. How am I meant to do step 1 if it isn't a real command
2. Should I (or can I) change to something other than gnome, because I don't think its worth missing out on propietary drivers just to use gnome.

My card is a hd7970.

View 7 Replies View Related

Debian :: Installing Wireless Usb Stick Drivers?

Apr 10, 2009

I am following the instructions to install my AWU254 on debian4.0 and get the following...

cjtrim@debian:~/src/rtl8185_linux_26.1027.0823.2007$ ./makedrv
./ieee80211/
./ieee80211/ieee80211_module.c
./ieee80211/ieee80211_rx.c

[code]....

View 2 Replies View Related

Debian :: Installing Drivers For Radeon Hd4350 ?

Jan 30, 2010

I just built myself a new 64bit computer, but I'm having a little trouble getting it going. At first I put windows 7 on it, but it requires 1gb of RAM just to run it's basic programs, and it's all bogged down with all these useless programs, and when I tried to turn off some programs to make it faster, half my stuff stopped working all together, because they required all these programs just to run other programs, it's just absolutely ridiculous.

So I looked into Linux, and after asking around a bit, I installed Debian. It's exactly what I want in an operating system, completely customizable, but I guess I've been spoiled by microsoft and I'm not that good with all the command lines and configuring the kernel.

Righty now I'm trying to get my video card going, but I can't even figure out how to get the drivers installed. I went to amd.com and got the drivers, but when I try to just put them in the bin, but it keeps telling me I don't have administrator priveleges, but I do. Then I tried following this manual wiki.debian.org/Manual-Howto#Atibinarydriver]Manual-Howto - Debian Wiki , but I got stuck at the part where it tells me to copy and edit my xorg.config. When I go to copy, it tells me the directory doesn't exist, but it does. And when I go to edit the xorg.config, it tells me I don't have priveleges again.

So is there any easy way to get my video card installed, or do I really have to create this new kernel and go through this whole long process? My motherboard has hybrid crossfire technology, am I able to use that with debian?

Here is what I have in my comp, in case the info is needed.

Debian Release 5.0.4 (lenny) Kernel Linux 2.6.26-2-amd64 GNOME 2.22.3
MSI KA780G mothboard
2x1gb ddr2 pc2-5300
AMD Athlon II 2.8ghz Quad Core 630
1gb pci-e radeon hd4350

View 5 Replies View Related

Debian :: Re-installing Video Drivers After Kernel Update?

May 31, 2010

I'm using the liqorix kernel and have been updating when new versions become available. However, every time I install a new version and restart, I have to re-install my video drivers. I don't think this is normal, but I could be wrong, I'm basing my past experience on updating Ubuntu kernels. So is this normal? Is there a way I can prevent myself from having to re-install my video drivers every time I update my kernel?

View 3 Replies View Related

Debian Configuration :: Installing ATI Open Source Drivers

Mar 1, 2016

I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)

Im tried to do it like this page says: [URL]....

However when i try to Code: Select allapt-get update he throws an error:

W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)

View 1 Replies View Related

Debian Configuration :: Installing Radeon Drivers For Wheezy?

May 27, 2011

I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing

# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-

[Code]...

View 12 Replies View Related

Debian Multimedia :: Installing Nvidia Drivers In Lenny?

May 27, 2010

I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.

View 9 Replies View Related

Debian Hardware :: Installing Nvidia Drivers Version 352.21

Sep 10, 2015

According to this link [URL] , I should be able to install the package through experimental on Jessie.

View 9 Replies View Related

Debian :: Installing Radeon 5770 Drivers On Wheezy?

May 27, 2011

I'm trying to install radeon 5770 drivers but it fails with this message.... same message when I use sgfxi

Code:
# vim /usr/share/ati/fglrx-install.log
1
2 Creating symlink /var/lib/dkms/fglrx/8.85/source ->

[Code]....

View 3 Replies View Related

Debian Installation :: Installing NVIDIA Drivers On Lenovo B560?

May 2, 2011

I want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.

I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run

'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.

View 14 Replies View Related

Debian Configuration :: No Screens Found (EE) After Installing Nvidia Drivers

Jan 19, 2015

I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...

Here you have my output...

X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck

[Code] .....

View 7 Replies View Related

Debian Configuration :: Login Failure After Installing Nvidia Drivers

Sep 17, 2015

I'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.

But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:

"failed to load session 'cinnamon'"

I cannot login as normal user or root.

View 1 Replies View Related

Debian Hardware :: Installing Canon Printer Drivers To Jessie

Aug 4, 2015

My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).

I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.

Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.

When I try to install .deb package in the driver file archive I get following output:

Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...

[Code] ....

And the next thing I tried:

Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:

  cndrvcups-ufr2-uk cndrvcups-ufr2-us

E: Package 'cndrvcups-common' has no installation candidate

I cannot solve this package error.

View 2 Replies View Related

Debian Hardware :: 8.0 Crashed After Installing ATI Open Source Drivers

Sep 11, 2015

The ATI/AMD graphics hardware is:

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]

I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":

Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).

It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.

The problem went away by installing ATIProprietary driver("[URL] ....").

PC is dell 9020, i7

View 6 Replies View Related

Debian Installation :: Installing Broadcom Wireless Drivers For Lenovo B560

Mar 31, 2011

My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.

View 4 Replies View Related

Debian Configuration :: Installing Wheezy Nvidia Drivers On Squeezy System?

Sep 1, 2011

I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:

libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb

[code]....

View 7 Replies View Related

Slackware :: Installing Nvidia Driver 13.37-amd64?

May 22, 2011

how to install this driver?

I disabled X server and I blacklisted nouveau kernel, but when I try to install the driver it says Error: Could not create the kernel module.

View 14 Replies View Related

Software :: Installing Banshee 1-1.7.3 From Source In Gentoo Amd64?

Aug 6, 2010

I am attempting to install Banshee 1-1.7.3 in Gentoo. So far I cannot find an ebuild (any links would be greatly appreciated) so I am attempting to install it from source. However I am getting stuck at the first hurdle; when I attempt the ./configure command all the dependencies check out OK, but I then get this error message at the end:

Quote:

./configure: line 12014: SHAMROCK_EXPAND_LIBDIR: command not found
./configure: line 12015: SHAMROCK_EXPAND_BINDIR: command not found
./configure: line 12016: SHAMROCK_EXPAND_DATADIR: command not found

[code]....

The reason that I am wanting this version of banshee is to use the Amazon MP3 plugin. Gentoo has an app for this in the portage repositories but it is hard masked for amd64.

View 2 Replies View Related

Debian :: Installing The "Non-Free" Drivers?

Aug 7, 2010

I've installed Debian on my IBM600 laptop The GNOME version. And it's working great but when I did the install I got the notice to install the "Non-Free" Device Drivers to get all the system hardware to work properly.Specifically seems like the sound is all that is not working.

View 3 Replies View Related

Debian :: Skype 2x Hangs On Sid AMD64

Mar 26, 2010

I installed skype for linux from skype site which is a 32bit application. I followed the instructions from this link: [URL] It is true that skype was installed and I could launch it. But during log on - it hangs.

running skype through terminal gave me this error/warning messages:

Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(<unknown>:2813): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(<unknown>:2813): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64

[Code]....

and yes I am running Debian GNU/Linux Sid AMD64 with AMD 64 Athlon X2 as cpu....

View 3 Replies View Related

Debian :: Compiling A X86 Kernel From Amd64?

May 23, 2010

I tried to compile an x86 linux kernel from amd64 machine. It is giving errors even after installing "gcc-multilib" But I wonder, it should be simply doable becuase "gcc -m32" creates 32 bit binary . I would prefer to compile it natively on x86_64 rather than creating an exclusive x86 chroot for that. Has anyone tried this on native x86_64?

View 4 Replies View Related

Debian Installation :: 8.0 Do Not Boot AMD64

May 3, 2015

I just have installed a fresh copy of Debian 8. However I cannot boot it. Thus the boot procedure start as below and for some reason it stops.

Loading, please wait...
fsck from util-linux 2.25.2
/dev/sda/: clean, 151066/30040064 file, 3893607/120130816 blocks

View 9 Replies View Related

Debian Multimedia :: 3D On Wine With Sid Amd64?

Jun 29, 2010

i have game LFS and i cant run it.

[code]....

And answer from wine forums: [*]Migi wrote: but OpenGL is working, i have Debian Sid AMD64, Wine needs 32 bit OpenGL.[*] How can i (can I??) run 3D on wine on to amd64?

View 2 Replies View Related

Debian :: Best Way To Install Nvidia On Amd64?

May 16, 2010

i just want to know whats the best way to do it cause i use a method which i dont know if is ok (by the way it works) but im not sure if my card is giving 100% (Geforce 8600gt), right now im using mys system isSqueeze with the non-free repos, what i usually do to get Nvidia work.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved