I got Lenovo Y50-70 and for a couple of days I try to start the NVIDIA card instead of the Intel one, but I got stuck. No matter what I choose in BIOS, Switchable Graphics or Ultra Graphics the lspci |grep VGA shows only Intel's VGA.Because when I install nvidia drivers they said there is no nvidia VGA on the system.
View 12 RepliesUsing online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
How do I determine which nVidia kernel to use with my system? I'm running a GeForce9800GT
View 11 Replies View RelatedI am running Debian Testing and can't get Plymouth Splash to work on my system.When splash is put in the grub line it locks up on boot up.Here are my system specs:
Code: Select alldcihon@solydk64 ~ $ inxi -Fxx
System:Â Â Host: solydk64 Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
      Desktop: KDE Plasma 5.4.3 (Qt 5.5.1) dm: sddm,sddm Distro: SolydXK 9 solydxk
Machine:Â Â Mobo: ASUSTeK model: M3A78-EM v: Rev X.0x Bios: American Megatrends v: 2003 date: 10/12/2009
[code]....
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I'm very new to Linux and have recently installed Debian Squeeze on my pc. I'm trying to install the Nvidia package as the system has a XFX 9 series card installed. I'm unable to get stop X to complete package installation. I keep getting permission denied when I run the command /etc/init.d/gdm stop. After reviewing a few forums I also log in as root to the console and tried the command there as well. I'm still getting the permission denied response. Can anyone advise on how to get around this?
View 2 Replies View RelatedI need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:
libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb
[code]....
I am a new user of Fedora 11. I am a Ubuntu user and could not get my GeForce 9100 on board graphics to work on my new computer with out crashing my computer so I decided I would try fedora. I downloaded the driver from NVidia and I am attempting to install it (Fedora didn't automatically find the driver). I get the following message:
"Error Unable to find the system utility 'ld'; Please make sure you have the 'binutils' installed. If you do have the bin utils installed, then please check that 'ld' is in your PATH."
I am running the driver from $Download as root. I don't know what ld or bin utils is or the check if I have it or if it is in my PATH.
I had Ubuntu working perfectly until I installed updates for the proprietary Nvidia drivers.Now Ubuntu freezes at the Ubuntu loading screen. Im using Ubuntu 10.04 64bit.I used to know how to access the terminal at bootup but I no longer remember.
View 5 Replies View RelatedThis was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
I recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.
At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.
System specs:
Intel Core Duo Quad Core
4 gigs DDR2
SATA RAID 0
Mobo: 680i SLI
800WATT Power Supply
I am trying to get Debian 6 to work on an hp Z400 - the problem is that it came with a NVIDIA Quadro NVS 295 graphics card; there may be a driver for Linux, but it doesn't matter, because GRUB insists on switching to some sort of graphics mode and the screen just blanks and switches itself off. Is there any way to make sure during installation that GRUB gets configured to stay in character mode only?
View 6 Replies View RelatedWhen I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.
When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:
"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."
I am trying to install the non-free NVIDIA drivers. I have read the guide here [URL] but what they didn't mention is what to do when you have a graphics card that isn't supported in Debian Lenny's repo driver version. I have the GeForce GTS 250, which isn't listed under the 173.14.09 (the stable repo version) supported VGA cards list. The version I need can be found in Sid and Squeeze (195.36.24 currently). If I add the Sid repository, it seems to work but it returns a whole lot of other unrelated package updates and its really annoying since I don't want to change to Sid yet. So how do I keep the rest of my packages under Debian lenny with only the minimal amount of packages to be under Sid.
I tried APT pinning once but the standard '*' won't work unless if it's alone in the 'Package' line. To clarify, a line like:
Package: nvidia-*
would get ignored.
I would also need a list of required packages and dependencies that must be installed from Debian sid to get this to work. The documentation for APT didn't help much. I can usually get around this problem by using the NVIDIA way but then I can't boot into Gnome GUI at all under other kernel versions except the one I compiled it for, unless I use the terminal to restore the Xorg stock drivers.
I recently reinstalled Debian on my desktop to migrate to 64-bit. Everything was working swimmingly before but I've encountered a bizarre error i have never seen before. After installing the Nvidia driver and rebooting when X comes up it complains it cant find any screens. However, if I kill X and start it again it starts with no issues. I also have an odd message at startup which might be part of the problem as well.I'm running Debian Testing AMD64 with and Nvidia 9800 GTX+. I compiled 2.6.27.8 for the install.
For what its worth the Nvidia module is showing up for lsmod so I don't really know what is wrong. I have tried reinstalling the nvidia driver as well which didn't help. The error message during bootup is:
Code:
Loading kernel modules...Usage: modprobe[-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] [ --dump-modversions ] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
[code]....
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies View RelatedI want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
I'm on an HP envy with with hybrid graphics configuration. I installed debian 7.7 from DVD, but it failed to load i915 driver on its own. It loaded nouveau. But gnome falls back to classic mode. There is not brightness control either.I tried adding i915 to /etc/modules and also blacklisted nouveau at the command line. Now i915 gets loaded, but with some hickups as shown in dmesg. Still I'm in fallback mode in gnome.
Code: Select alljay@aura-envy:~$ dmesg | grep drm
[Â Â 16.152467] [drm] Initialized drm 1.1.0 20060810
[Â Â 16.161706] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
So I went ahead and added intel_agp (before i915 line) to modules file, but still no luck. I suspect there is no module called intel_agp at the first place, because :
Code: Select alljay@aura-envy:~$ sudo modinfo intel_agp
[sudo] password for jay:
ERROR: Module intel_agp not found.
URL....
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies View RelatedI had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies View RelatedI have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
When you get to the package installation you get by default:
Desktop Environment
Standard System
Which i disable for my minimal installation.Out of curiosity, can somebody tell me what is installed with the Standard System?
I am running Debian Squeeze with 2.6.32-5 amd64 kernel with GCC 4.3.5 (the same one used to build the kernel) installed. I have a nVidia GTX 470. I'm trying to install the latest nVidia drivers (260. ...). I've never installed noveau or any other open source nVidia driver. Here's what I've been doing:-Change the "Driver "nvidia"" line in /etc/X11/xorg.conf to "Driver "vesa""-Restart system in single user mode as root, no services running-cd to the directory with nvidia-Linux-x86_64-... .run (what I'll call nvidia.run)-enter "sh nvidia.run --uninstall"-enter "CC="/usr/bin/gcc-4.3" && sh nvidia.run"It starts up and it compiles the kernel 100%. Then it says this:
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
[code]....
I installed Debian 6, on my workstation again, after a long long time.The installation worked fine for me, but after, the first reboot, I could see some lines of booting code and suddenly, some lines after |udev|, my screen got signal disconnect and my computer hang up itself.I tried my harddisk on another workstation, same problem here. On my first workstation there is a HD 4xxx inside and on the other workstation i think it is was a Radeon card 9000.I got the same problem with: Arch Linux. But openBSD works fine on this workstations.Do you got some clues for my problems? I also could not start the boot cd of archlinux some times due to this problem. Sounds strange to me.
View 1 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
For testing I made a debian 8 dvd 1 installation on an usb stick. I selected desktop gui gnome and lxde. Both work. An ethernet 100mb cabel connection works. I can open iceweasel an surf websites.
If I open synaptic package manager and select vlc for installation or press 'mark all upgrades' I get this message. Insert disk debian gnulinux 8 jessie official dvd bin in drive.
Synaptic does not try to get packages from the internet.
Is a debian 8 dvd 1 installation an off line installation? The package system will not connect to the internet?
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
View 2 Replies View Related