Debian Installation :: Reinstall Stalls At Installer Boot Menu
Jan 18, 2015
I'm trying to reinstall Debian on one of my machines after an unsuccessful install of FreeBSD (it didn't jive with my ssd). Debian installations have never been a problem before on this particular setup before but now for some reason it won't get past the "Debian GNU/linux installer boot menu". The USB goes into idle mode and the menu does not respond to keyboard strokes. I've tried several debian images to no avail. Ubuntu seems to work just fine though but I don't want to install Ubuntu just because Debians having some problems. I booted ubuntu live and reformated the SSD I had tried to install FreeBSD on because there were no partition tables on it but that didn't work either. I'd like some expert input before I go do another `dd`.
View 2 Replies
ADVERTISEMENT
May 23, 2011
I have just installed Squeeze on my laptap with a radeon mobility equipped laptop. When it boots, I see the following message:r600_cp: Failed to load firmware "radeon/RV635_pfp.bin".and some others, too, but it stalls at that point, and I cannot use CTRL-ALT-F2 to get a text-based prompt - in fact, I can only seem to get it back with a ALT-SYSRQ (R-E-I-S-V-B) sequence to force a reboot. It is a multi-boot system, with a windows partition, Ubuntu partition, and the new Debian partition. The Ubuntu and Windows partitions will still boot, only the Debian stalls.
When I boot into Ubuntu, I can see the Debian partition, and can see (for instance) the /var/boot/dmesg file, but it only says:"(Nothing has been logged yet.)"So, being new to debian itself (even though, I know, that Ubuntu has a debian base), how can I make it boot without X, which is I presume, the center of the difficulty? Can I change some file on the debian partition using Ubuntu to get the debian partition to boot in text only mode, and then try to fix the radeon driver?
Alternatively, can I put the proper files for the radeon driver *from* the Ubuntu partition *to* the debian partition and expect it to load and boot correctly? I did, at one point, download and install the proprietary ATI driver files on Ubuntu, so can I put them in a proper place on the debian install?
View 5 Replies
View Related
Jan 25, 2010
I am new to linux and I am attempting to establish a dual boot with Windows Vista 32 Bit and Linux Debian 503 i386-netinst. When I place the install cd into the cd drive and boot from the cd a problem occurs at "Booting the kernel."
A message appears:
[0.116007] ..MP-BIOS bug: 8524 timer not connected to IO-APIC
Then the installation just "stalls" and never moves past this point.
View 1 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Jul 5, 2015
I've installed Ubuntu lots of times on my UEFI computer without any troubles. The last few days, I've been trying to install Debian Jessie on my computer. I do the steps bellow:
- Download the corresponding iso (amd64).
- Create a UEFI bootable USB drive with Rufus.
- With Safe boot, Fast boot and CSM disabled, I boot to the USB drive.
I expect to see something like this:
But what I get is this:
I'm using an Asus PC. GL550JK. The UEFI version is 205 (from Asus Support website).
Things I've tried:
- Booting with CSM on => Same behaviour. It's not my intention to install debian with CSM on, though.
- Using Wheezy instead of Jessi => Same behaviour.
View 5 Replies
View Related
Mar 6, 2010
I tried to boot the net installer (debian-504-amd64-netinst.iso) from a flash drive (installed with dd). When I tried to boot that, my BIOS skipped the flash drive, which I had set the flash drive as the first boot device. So, I put it on a CDRW, and got the same result. I also tried the offline installer (debian-504-amd64-CD-1.iso) using both of those methods, with the same results. I verified the MD5SUM of this download. I am installing on a computer with a 64 bit Pentium 4 Prescott, if it matters. I have no other working OS on the computer. What other options do I have? Or am I doing something wrong?
View 8 Replies
View Related
Mar 5, 2010
I installed flashplugin-installer in my ubuntu netbook remix, i found out that it couldnt play net videos. I have tried to purge it inorder to install adobe flash player but it is not going away. this is the message i get:-
koyigo@ubuntu:~$ sudo apt-get -f purge flashplugin-installer
[sudo] password for koyigo:
Reading package lists... Done
[code].....
View 2 Replies
View Related
Jun 8, 2011
i'm used eeepc here the situation i've already install squeeze AMD64 KDE but i want to try using i386 gnome which is more friendly for my eeepc spec. problem is there other boot in my pc. i'm currently using win7, ubuntu 10.10 32 gnome, and ubuntu ultimate 64 gnome and i don't have external HDD.
Question is i want to remove all linux OS and keep my win7 is it ok if i'm using Gparted to delete all linux OS and then installing deb squeeze i386. my next project is to build portable server on eeepc.
View 1 Replies
View Related
Jul 16, 2015
I'm making some tests with Debian Setup.
As reported by the docs [URL] .... there are some boot parameters available for the Debian Installer.
I would like to try a setup setting the base-installer/install-recommends to false.
This can be done via preseeding, but I'd like to try it out setting the boot parameter.
I've tried several combinations but no one has been effective.
What is the syntax for setting the base-installer/install-recommends parameter to false at boot time?
View 3 Replies
View Related
Dec 10, 2010
I am trying to install Debian 5 on an Everex NM3500W Stepnote with a VIA chipset and integrated S3 graphics. The initial screen comes up, but when I click "install" it just prints the "booting..." message and sits there with the DVD spinning. Are there any particular problems know for this model? Any particular commands that might let the installer boot?
View 5 Replies
View Related
Nov 22, 2010
I have installed splashy from sid. Rest of the system is squeeze, and put the parameter "vga=791 splash quiet" in the kernel parameter...
Unfortunately this is not working properly. It does load the splash image as intended, but it then just hangs here, and does not load the OS unless I press enter. (I asume that something is hangning, but I cannot see the shell from here, and ctrl+f2-f6 is not working so I cannot get to any tty).
Then after boot, I can only see the / partition. But not /home. Duing a fdisk -l shows up the partitions, so they are there, just not mounted at boot?
If I press F2 at boot, before the image shows up, it does actually boot without any issues at all. It must be something with the image loading that is causing this.
View 3 Replies
View Related
Dec 11, 2010
This is what is happening I downloaded the Ubuntu 10.04.1 LTS MD5 check and everything good for burning
Burned the image and restarted my laptop for installation.
Well I get the Ubuntu logo with the little points down and looks like loading but it stalls and does nothing after some time.
Don't know what to do I'm on Fedora now but I want ubuntu.
View 9 Replies
View Related
Jun 26, 2011
I had ubuntu studio installed ( for the record I hated it and every ubuntu flavor I have ever used. ) After backing off all the stuff from my home dir I started to install testing from a dvd. ( Is there a net install for testing? I couldn't find it) Don't ask me how it happened but some times I would have two grub graphical boot menus. One would chain to the other. I suspect that happened from one of the very friendly updates ubuntu did. Well when I tried to install testing I got a red screen telling me that grub wouldn't install so I tried lilo. Well it wouldn't install either. Back in the old days when I was a slackware guy installing from a stack of floppies I had a trick to wipe out any boot loaders or other stuff that gave me a problem. I would dd if=/dev/zero of=/dev/<drive info such as hda with no partition number> .
This would write zeros over the drive and it would look like a new drive. So I did this trick. But still no joy ( this is a clue, dd was also thinking that the beginning of the drive was after the boot sector.). I suspected that the installer wasn't doing it's job right. So I got a PCLinuxOs disk and started that installer. The PCLinuOS installer has a cutesy visual bar that shows the partitions. Well sure enough the boot sector showed as blank. This was what the Debian installer had done. It left the boot sector blank and tried to install the boot loader right after it. This won't work. Now I consider when some version of Linux falls on it's face and another version does it right that the version that fell on it's face has a problem.
One might even call it a bug. But I don't know what to do about it. I don't think the problem is with grub or the installer itself. I think how the drive was looked at was faulty. That's why dd didn't blankout the boot sector. So what do I do to help get the Deb people to fix this? The more I think about it the more I think the problem is with udev ( what a surprise) I think this because I suspect dd looks to the info set out by udev to find the beginning of the drive.
View 6 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Jun 13, 2009
I've been using Linux (Fedora) since 2005 (when I happily abandoned Windows) and loved every minute of it. No installation or other unresolvable problems. But now, I am totally stuck. A month ago, they just gave me a new desktop in the office: Dell Optiplex 960 with the Intel Core 2 Duo vPro chip. So I waited for Fedora 11 to come out, burned the x86-64 Install Media on a DVD, repartitioned the hard drive like I always do on new Windoze machines, and began installing. The install process gets to this announcement and stops:
mounting /tmp as tmpfs... done Then, after a 5-minute wait, if I push the power button on the computer for a hard reboot, then it says:
running install running /sbin/loader and then stalls for good. Then all I can do is hard-reboot again.
So, out of curiosity (and for other reasons), I tried booting the machine from other linux disks: Knoppix, and SystemRescue (www.sysresccd.org). They all stall at different points. The funny thing is that both Fedora 11 x86-64 and SystemRescue happily boot on my personal one-year-old Lenovo T61 Intel Centrino Duo VPro laptop.
I get a feeling that somehow the Intel Core 2 Duo vPro is causing the problem. I also think that there is got to be someone else out there who either had this problem, or was able to install F11 on similar Dell box. Google search did not produce actionalbe answers for me.
View 3 Replies
View Related
Aug 28, 2010
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
View 9 Replies
View Related
Sep 23, 2010
I know this is not strictly a Ubuntu question, but I was unsure where to ask this question and since it is about installing Ubuntu Server, I put this question here.
I have used the Universal USB installer to create an install USB device, but I also need to be able to boot to a DOS prompt so I can update the bios if I need to. I would like to have just a single USB drive rather than having to carry two of them around.
Has anybody used the Universal USB installer and is there a way to modify the resulting USB installer so that I could say add a menu program such as grub or something else that would allow me to either access the installer or go to a DOS prompt? Kind of like the way CloneZilla does or perhaps the gparted Live CD.
View 1 Replies
View Related
Aug 1, 2011
I've finished the installation of Debian Squeeze using Installer loader from Windows. But the Installer menu is still appear on Windows Boot Manager.
I've try to uninstall the "Installer Loader" from Windows and I got an error message about BCDEDIT (if I'm not wrong), during uninstallation process.
I ignore it, and continue the uninstallation process until complete. But, After I reboot my computer, the Installer menu is still appear on Windows Boot Manager.
I'm using Windows Vista Business SP2.
View 4 Replies
View Related
Mar 4, 2011
I've created live squeeze usb-hdd with syslinux as boot manager:LB_BOOTLOADER="syslinux". Now if I boot from this usb-hdd image I get in the boot menu:
Live
Live (failsafe)
Live 686
Live 686 (failsafe)
How to configure to put these "failsafes" away?
View 5 Replies
View Related
Feb 17, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on an IBM ThinkCentre. I have earlier had a dual boot Win 8 and Ubuntu 14.04 installed on the computer. When I installed Debian Jessie, I deleted the Ubuntu partitions and created new partitions from the free space. The install went fine and the Debian EFI/UEFI version of Grub was installed, but clearly at some other place, as when I boot the system, the old Ubuntu Grub pops up and of course cannot find the necessary files that it is looking for.
View 9 Replies
View Related
Feb 18, 2010
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
View 4 Replies
View Related
Jan 20, 2016
About 6 months ago or so, I got a new 802.11ac card for my laptop:
$ lspci | grep Broadcom
07:00.0 Network controller: Broadcom Corporation BCM4352 802.11ac Wireless Network Adapter (rev 03)
This one uses the broadcom-sta-dkms binary driver in module wl. Everything was working fine until a few days ago. I booted up the laptop following a power failure and the network was acting very strange. Upon connection to the network, I had network access for a brief period, then it went away. Network manager claimed to still be connected. The access point thought I was connected as well. No packets were getting through. After many cycles of trial and error, I found that upon each network connection (different network, same network, didn't matter) I could ping the router for about 30 - 45 seconds.
After that, my pings went unanswered. Using wireshark in monitor/promiscuous mode, I found that I was indeed not seeing any replies and no machine on the network was responding to my ARP requests. Inspecting the ARP cache before and after, I see the mac address of the router as usual up until a couple of minutes after the pings stop coming back. I am also seeing wireless activity from other machines on the network, but I think it was only broadcast activity I was seeing. This behavior didn't change with signal strength either. I saw the same behavior when I was 3 feet from the router as when I was 50 feet from the router. Wireshark didn't show any other activity that looked out of place to me.
I did find a work around. If I purge the broadcom-sta-dkms package (apt-get purge broadcom*), reboot (haven't checked if unloading the wl module is sufficient), install the broadcom-sta-dkms package, and manually load the wl module, everything works as expected. I'm not sure why the driver won't survive the reboot. I have had to do this each time I boot my laptop for the last few days. I'm not sure what might have changed as before that power failure I think I had a couple of weeks uptime and I do updates at least weekly. I think I remember seeing an update to the kernel come through at one point recently. I tried reverting to the previous kernel version but that didn't seem to do the trick.
I'm on Debian Jessie.
View 2 Replies
View Related
May 26, 2011
I am trying to upgrade my F12 system ti F15 using the PreUgrade route. The initial package download goes Ok but on re-boot I can only access my old F12 system. df reports 44M avail in /boot which is on sdd1. Since I do have a multiboot system I checked that there was an "update" folder under "boot" and that it had the update versions of vmlinuz and initrd which it had. I edited "menu 1st" as described in the Pre-Upgrade notes setting the root entry to (hd0,0) as used for my working system and then did a re-boot. I selected the new upgrade entry in the GRUB menu but the system complained that it couldn't find a file. I have tried using root (hd3,0) but this does not work either. What am I doing wrong?
View 6 Replies
View Related
May 20, 2010
I have pc containing 80 GB Hard Disc with 1 GB RAM. I am using 60 GB for windows and 20 Gb for Fedora 12. Recently i formatted the pc and reinstalled both. I installed windows 7 instead of Windows XP i am using earlier. Now i do not like windows 7. My system became very slow. perhaps as my pc is five years old and motherbord configuration may not be matching. Now i want to revert to windows XP. I do not know any method by which i can retain fedora 12 and change from windows 7 to XP. Earlier i formatted complete hard disc and installed fedora 12 (myself) after windows 7 (by professional). but now i do not want to reinstall fedora 12. It will lose all upgradation and installed packages.
View 2 Replies
View Related
Feb 8, 2010
The Karmic installers for ARM CPUs are .img files that are meant to be written directly to Flash media, rather than .iso files that are meant to be burned to CD.
I'd like to run the ARM port of Karmic under the QEMU hardware emulator. This should be possible, because the .img files are sector-for-sector images of a hard disk drive. But when I try, I get a panic because the kernel can't mount the root filesystem.
I think the problem is that hard drives are provided by QEMU by emulating an IDE controller, whereas the ARM .image files are meant to be run from a USB stick. Those are accessed via SCSI rather than IDE.
Perhaps my problem is that the kernel I'm using with QEMU doesn't contain an IDE controller. It appears that QEMU doesn't provide a SCSI emulation, just IDE. An alternative would be to convert the .img installer file to a bootable CD-ROM image. Is there a way I can do that? Here is my command line:
Code:
$ qemu-system-arm -M versatilepb -kernel ~/Documents/Kernels/ARM/vmlinuz-2.6.28-versatile -hda ubuntu-9.10-desktop-armel+dove.img -m 256M -append "root=/dev/sda1 rw"
It doesn't work to say "root=/dev/hda1 rw" - it still can't find the root filesystem.
View 4 Replies
View Related
Jun 25, 2010
I've got a fresh install from the alternate CD. The thin client gets to the point where the screen fills with dots .........done, then it just sits there and does nothing else. No error messages or anything. I have a two nic setup that worked great on karmic and haven't changed any of the hardware around or anything. I'm at a loss as to what to do, I've reinstalled several different times fiddled with every setting I could think of and searched and read till my eyeballs are ready to fall out. It has become a matter of principle to me now and I refuse to go back to an earlier version.
View 1 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Nov 7, 2010
I had a 100% XP machine, installed 9.10 into a dual boot a while ago, and eventually upgraded to 10.4 LTS.
Current partitions
/dev/sda1 ntfs
/dev/sda2 extended
---- /dev/sda5 ext4
---- /dev/sda6 linux-swap
Currently, dual boot is working and both OSes are working as expected (although there's that bit of inconsistency with intel 845 graphics). I want to do two things in a major re-install: move Home to a new, separate partition, and do a clean 10.4 install while still retaining XP dual boot. If possible leave sda1 untouched, but that can be reinstalled if necessary.
Only things in Home that need to be moved are documents and mozilla seamonkey prefs and emails. Those items I can save and restore manually, so I have no problems with backup needed files, then clean install, then manually restore.
I know enough to be willing to try suggestions, but also know enough to recognize I can get into trouble. So that's why I'm asking here first.
View 1 Replies
View Related
Apr 5, 2011
I'm trying to help my dad, who's recently got a computer that had Ubuntu 10.10 preinstalled. After some problems while I wasn't in a position to help out, I think a reinstallation is necessary. But when I make a USB drive to install it from, it only has .exe files, and nothing Ubuntu can use, so it doesn't boot on startup (even though it's set to boot from USB first) and it can't be run later either. This happens when I download the ISO from the main download page on the Ubuntu website, so is there a link to download one without Windows files?
View 9 Replies
View Related
May 14, 2011
I have done some commands in ubuntu 11.04 and got problems, thinking of reinstall it. (laptop acer 5738zg)
Previously when i have dual booted win7 and ubuntu10 and linux mint i always get "grub rescue" when i try reinstall my linux partition, and it ends with i have to do clean reinstall of both windows and linux, which is a major pain in the rectum area
Is there a way to make my linux go back to original state without reinstall, and if i reinstall, how can I do this without loosing win7 partition and get this awful grub rescue message.
View 1 Replies
View Related
