I have upgraded from Fedora 9 to Fedora 13. When I try to install or update software I always get an error message "invalid GPG KEY" I checked my etc/pki/rpm-gpg directory and it appears I have all the keys. How do I know if they are valid? And if not how do I get the right stuff?
View 1 RepliesIve just installed Debian Lenny and then fglrx and kde, but if i try to login to kde, i get an error message because of invalid user. Do I have to enable my user first to login to kde or something?
View 4 Replies View RelatedI was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
Installed rhel 5.3 on dell r710 with md1000 as das.
After creating raid 0 + 1 and rebooting, received an error message below:
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI try to setup a HPC cluster with CentOS 5.5. But now there is no Internet connection available in the room where the hardware is located so I set up ntpd server using synchronization with local clock (maybe I do something wrong). Here is my ntp.conf file on a master node (the master node has IP 10.0.1.1, a file server has IP 10.0.1.2 and compute nodes are 10.0.1.3..10.0.1.11, comments are omitted):
Code:
restrict 127.0.0.1
restrict -6 ::1
restrict 10.0.1.1 mask 255.255.255.255 notrust
restrict 10.0.1.0 mask 255.255.255.0 nomodify notrap
code....
Any time I try to install software building it from source when I run make I get a waring "Clock skew detected. Your build may be incomplete". Some software build successfully and run normally after install but some build tasks are failed for example when I try to build RPM's via 'make rpms' for BLCR I get an error message about invalid date in changelog. But the system date seems to be right. I suppose I have invalid settings of NTP.
This has to be the sixth time I am going to have to reinstall Ubuntu (Can't get enough of that Linux greatness) in the past 6 months. I just don't understand what exactly is wrong, I don't install anything extra (but the ubuntu restricted extras) yet updates that ask me to reboot will take me to a GRUB command line screen and trying to boot through the command line interface gives me an, "Invalid Magic Number", error.
There should be an official tool for when problems like this come up, so that users like me can easily move their files off their HDD before reinstalling. I didn't come here to rant but, does anyone know what may be causing this everytime, how it can be avoided maybe even how to deal with the Magic Number error and boot in (I wouldn't mind typing in the commands every time BTW)?
My system
Hp Compaq 6730s
2.0Ghz 575 Celeron
4GB RAM
Intel X4500MHD
Broadcom 802.11b/g
I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies View RelatedMy computer: 3 year old cheapish box, Gigabyte board with onboard video and sound. Cat5 cabled to Linksys wired router to a cable modem. Debian 6.0 Stable. Network installation.
This didn't happen from the initial installation but I now get an error message each time I get the updates.
I first see the red update notification icon top right of Gnome desktop. I click on it, enter root password at prompt. Click the install updates button on the update manager window. The software progress bars show me the download progress but then I get the following errors.
An error has occurred and installing has been aborted. Error Message: subprocess installed post installation script returned error exit status 1
Error message: dependency problems - leaving unconfigured.
I cancel the messages. The notification icon then turns to the reboot icon. If I start the update manager again from the System menu it shows me that my system is up to date, so I suspect the update has taken place. But why am I getting the error messages. This now happens every time I see the new updates icon. Apart from that everything works fine.
I include my source list in case this helps.
#
# deb cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 NETINST Binary-1 20110320-15:03]/ squeeze main
[Code].....
When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
I'm relatively new to using Ubuntu. I'm currently using Karmic, and got an error message when trying to update packages
View 4 Replies View RelatedWhenever Ubuntu tries to update itself or if I initiate an update I can install every but Deluge's update.I get the following:
AN ERROR HAS OCCURE:
E: /var/cache/apt/archives/deluge-common_1.2.0-2~karmic~ppa1_all.deb: trying to overwrite '/usr/share/pyshared/deluge-1.2.0.egg-info/dependency_links.txt', which is also in package deluge-core 0
What does this mean? It suggests filtering broken to fix it. I do so and mark deluge for reinstallation but it doesn't seem to solve anything.
I am unable to update apt-get and I am unable to install any software. The following message when I use the sudo apt-get update command:
W: GPG error: [URL] maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
W: Failed to fetch [URL] Hash Sum mismatch
E: Some index files failed to download, they have been ignored, or old ones used instead.
When I for example try to install the gcc I also get weird feedback:
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I thought it was that they where already installed on the comp, however, the computer keeps telling me that gcc is not installed. I am not quite sure what to do. I am using the latest version of ubuntu (10.10).
When I hit the "upgrade" button, the box greys out and I get a message saying "could not download release notes, check your internet connection" (or words to that effect)?
View 1 Replies View RelatedI have a laptop with dual boot system, opensuse 11.2 and windows xp in the same hard disk.
I tried to remove suse doing the following :
Ι loaded windows xp cd and get in recovery console. After that i did Fixmbr and fixboot.
After that, after the bios screen, i get a black sceen with the message "invalid partition table"
If i type a "dir" command i can see my files, so the disks partiotions are not corrupted i guess. Just the MBR is damaged.
I have the following problem since yesterday.
Trying to update manually provides the following error message
I can't access fedora.project.org any more!
All other web access runs fine as usual.
I am helping a friend (remotely) and she has a problem on the laptop which prevents doing any updates. The error message is Could not initialise the package information An unresolvable problem occurred while initialising the package information. Please report this bug for the 'update-manager' package and try to include the following error message:
'E:Encountered a section with no Package: header, E: Problem with MergeList /var/lib/apt/lists/gb.archive.ubuntu.com_ubuntu_dists_jaunty-updates_restricted_binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
[Code]..
I have an old computer that I use for trying out software and other things before putting them on my newer machine so as to avoid irreparable damage. The machine has 2 hard discs; the first disc contains Windows and I wanted to use the second disc for Linux. I installed Fedora 14 on the second disc and followed this with Ubuntu 10.10.
After I installed Fedora I re-booted and had a choice between booting into Windows or Fedora. After adding Ubuntu I assumed that Grub2 would pick up both Windows and Fedora and add them to the grub menu but instead, the grub menu only contained the options to boot Fedora or Ubuntu. I tried running 'sudo update-grub' but got the following message:
"cannot access /var/lib/os-prober/mount/boot
Boot: No such file or directory"
When I had a look in /os-prober all that was there was a file called 'labels' and when I opened it it consisted of the one line "Fedora 1" It looks to me, who doesn't know a lot about grub2, that something is missing from grub and had wondered whether to re-install it or whether doing so would be jumping out of the frying pan into the fire.
Sometime during the morning of Feb 23, 2010, I accepted Update Manager's updates on both my desktop and my laptop, both of which are running Karmic and both of which have been regularly updated by Update Manager. Before the updates, which I think I saw included an update to CUPS, my Brother MFC-8820D printer had been running satisfactorily.
Since the updates, all the printer yields, in response to my attempts to print from either my desktop or my laptop, is the following six lines:
ERROR NAME;
configuration error
COMMAND;
setpagedevice
OPERAND STACK;
--dicttype---
Assuming I'm correct that CUPS was updated on Feb 23, is there some way to find out what the latest CUPS update involved, and/or how to return to a prior version?
When running Update Manager I am given an error message and it won't complete the update. I tried uninstalling the program clementine.
Quote:
I had to register with a new username, because I could not remember my logon details and have since changed ISP so could not get details sent, anyway that aside to the problem.
I upgraded to 11.04 and all went well (hence posting here and not in the Upgrade section) and it is running fine, well until yesterday.
I ran the update manager as I usually do when first entering Ubuntu and it did an update but then gave me an error message about file permissions and to check my connection (which was connected OK).It has also affected the Software Installer, and now I can not install any new software.
Is this a generic problem with the latest update or is it just my Dell Inspiron 1545 please?
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies View RelatedI installed openSUSE on a XP runnng computer and every thing is OK.When I tried to Install a new XP, I got this error:Code:Invalid Partition Table I fixed it by reinstalling GRUB using Rescue System.I tried fix mbr on XP Repair System and I got that error again.Now I want to keep XP and remove openSUSE. But computer only boots by GRUB and XP's boot loader is unable to boot and shows that error
View 9 Replies View RelatedI'm trying to install Fedora 13 VM on my CentOS 5.5 64 bit install following the below link. I used this same process to install a CentOS 5.5 VM just to test the process. Now when I try to follow it making changes for Fedora Im getting an error.[URL] config file:
kernel = "/install/vm/fedora/vmlinuz"
ramdisk = "/install/vm/fedora/initrd.img"
name = "fedora13"
[code]...
In the CentOS link I posted it said to use kernel from the xen directory.Ive found out that the last fedora version that shipped with xen was fedora 8. Does anyone know where I can find a fedora 12/13 xen kernel? Ive searched google for hours and can not find a xen kernel. Actually I'm to the point where I would even use ubuntu or any similar distro if I could find a xen kernel.
I installed Azureus from their site. It works well. The only problem is when Azureus tries to apply updates, I get this error message:
"The folder <path-where-I-installed-Vuze> is not writable. This will prevent future software updates from being applied."
There was a link the the Vuze wiki, and the problem is that I (or is it the Azureus updater?) do not have permissions to write to that directory, or words to that effect.
How do I apply the proper permissions so that when an update from Azureus is downloaded, it is applied?
The wiki offers this solution:
Quote:
But this looks like something that I have to do manually, each time...
How do I set it up, so that the updater has the permissions and uses the proper password to do it automatically, when I restart Vuze?
I'm using Ubuntu 9.10
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedHas anyone tried to download 11.4 via Torrent? I use Ktorrent and I'm getting Invalid data from tracker error.
DVD and CD versions
Straight download seems to be working
i using centos 5.5 i have applied grub-md5 password to avoid to go single user mode and what happened someone knew this password then i have applied a new grub-md5 pawword and try to go to single user mode of the purpose it is working or not then message comes invalid password and i also try to previous password same message was on the screen right now i m unable to go single user mode and i have deleted it grub.conf and try to go single user mode then i m able and i again applied the grub-md5 password and try to go single user mode then same message invalid password why it is happning and what should i do ahead.
View 3 Replies View Related