I'm trying to install debian (testing) on my iMac, it boots fine, the keyboard works fine on the first screen, but when it goes to the language selection screen, i can't do anything. I've tried it on graphic install too, and it don't work. Also, i've tried it with an usb keyboard and mouse.
View 2 RepliesI have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
I have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
I have Lenny installed on an Imac G4, running command line only. It's primary purpose will be SSH.
I would like to know how I can turn off the screen when I'm not using it. It will be left on running other things for periods of time, and I want to save power. (and the screen)
Since the screen is built-in, it might have a similar solution to what I would do with a laptop. On the other hand, there are no shortcut keys to dim the screen like on a laptop.
Because it is command line mode only, I will need to know what commands to use to dim or shut off the screen, or to configure an auto-off time limit.
A newly installed CentOS machine when connected to a 4-Port KVM switch stucks at GRUB screen asking for OS selection menu.
Before starting CentOS box
> IF the view of KVM is set to this computer, GRUB automatically selects the default option and loads the kernel
> IF the view of KVM is set to any other computer, GRUB doesn't load the kernel after default time out. I've to press enter key on
GRUB screen everyday.I want this machine to get OS loaded even in my absence.Once i removed the display cable and tried to start the computer but it again stucked at GRUB screen.Can a linux computer boot without monitor?
Note: CentOS 5.2 is only OS installed on this computer.
No issue before connecting to KVM
All KVM ports are tested and are working fine.
Once the OS is loaded successfully(either automatically or manually), everything works fine.
I can't get the Ubuntu 10.4 Live CD for PPC to work on my old 800 MHz flat screen iMac G4. I believe it's supposed to work, but the installation dies with a magenta screen about a minute after selection of any boot option in the yaboot dialog.I tried all the sensible boot choices and options, all with the same result: some trundling of the CD reader, display of the messages related to the ramdisk, more trundling, then a blank magenta screen and no more trundling. The iMac becomes totally unresponsive: no more messages, can't enter any command shell. I get the impression (complicated story) that it begins to install the X server and then aborts.
This iMac has a PPC G4, 512 MB of working memory, and a GeForce2 MX video card with an nVIDIA chipset and 32 MB of video memory. There seems to be no hardware problem: OS-X 10.3 and OS-9 run just fine including wireless networking.
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
I hv installed debian (lenny). My problem is that sometimes it loads perfecly, but on other times it gets stucks at mounted the root. and waiting for the root. wht shd i do?
View 14 Replies View RelatedI have install a MBR table partition with 3 partition windows partage et linux And i have install windows7 first no problem but i want to install debian now
and the dvd of debian is no detected
I recently attempted to install Debian 8 on my iMac (late 2011). I partitioned my drive using disk utility to create FAT partitions (100GB for Debian and 2GB for SWAP) and installed rEFInd to boot into Debian.During the installation process I selected the drives I partitioned and set the mount points for each as / and swap.
Everything was fine and installation was successful and was prompted to restart to set up Debian. However when I did Grub did not recognise the Bluetooth keyboard. Unable to do anything it started the "Debian GNU/LINUX option" and loaded into what seems to be the grub prompt/terminal with the following displayed in bold:
[ 3.538535] i8042: No controller found
Loading, please wait...
Fsck from util-linux 2.25.2
/dev/sda5: clean, 112838/6119424 files, 1276387/24455424 blocks
[ 9.123670] [drm:radeon_pci_probe] *ERROR* Radeon kernel modsetting for R600 or later requires firmware-Linux-nonfree.
[ 10.715321] systemd-fsck[363] : fsck.fat 3.0.27 (2014-11-12)
[ 10.715690]systemd-fsck[363] : /dev/sda1: 248 files, 35995/403218 clusters
Debian GNU/Linux 8 iMac tty1/I was able to get my hands on a USB keyboard which works. Obviously I can't boot into Mac now because grub has taken over.
I have downloaded the latest version of Debian for PPC to run on my iMac G3 600MHz 1GB ram. The problem is, is when it is partitioning the HD the computer just shuts down and restarts from the beginning. I don't understand this. I chose it to erase and use the entire disk. The HD is 80GB. I really want to install this OS!
View 6 Replies View RelatedI initially installed Debian 8 onto my iMac G5 (with KDE), and it would boot to a black screen. I then tried again, and reformatted+reinstalled with only "Standard system utilities", "Print server", and "SSH server".The boot hangs before I get to a log-in prompt. Please see the attached log files I pulled off by booting from the rescue CD option. (I got an error when attaching the log files, so I used tinyupload to upload the files.URL....
Here's some of "syslog"
Code: Select allApr 27 17:37:45 iMacG5 systemd[1]: Started System Logging Service.
Apr 27 17:37:45 iMacG5 kernel: [ 13.137638] Unable to handle kernel paging request for data at address 0x00000008
Apr 27 17:37:45 iMacG5 kernel: [ 13.137645] Faulting instruction address: 0xd000000002314488
Apr 27 17:37:45 iMacG5 kernel: [ 13.137654] Oops: Kernel access of bad area, sig: 11 [#1]
[code]...
I'm booting a usb stick with a custom initrd.gz, which contains a preseed.cfg at /. This preseed.cfg has the following initial lines:
d-i debian-installer/language string en
d-i debian-installer/country string BR
d-i debian-installer/locale string en_US.UTF-8
But the installer keeps asking for language/country/locale.
If I wanted all localisation to be in English (UK)but also need somestmes to be able to type and read Cyrillics, which options shall I sellect diring installation? I do not need Cyrillics as the default.
View 5 Replies View RelatedI have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
I have come to the conclusion there is no way to adjust brightness for this iMac besides xgamma tweaking.Can someone explain why it is not possible?
View 1 Replies View RelatedI downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedScreen brightness on aluminium 24 inch Intel iMac
I was just about to re-install Ubuntu to dual boot with OS X on my 24 inch aluminium Intel iMac. Then I remembered the reason I got rid of Ubuntu the last time... screen brightness.
It is a known fault of these machines - the default brightness is set far too high. Sometimes it hurts the eyes. There is an application I have to use with OS X called 'shades'.
If I instal Ubuntu in VirtualBox I can still use 'shades', but when I run it natively as a dual-boot os, I do not have access to the 'shades' app so the screen is far too bright to use for any reasonable length of time.
Is there a workaround for this, without having to do something on every log-in?
(I am using the 64 bit AMD version of Ubuntu.)
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedI'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View RelatedI'm trying to get my iMac G3 on the internet. I'm running Lenny. I have two options: I could (ideally) get the ethernet to work, or else I could use my phone (Palm Pre Plus) as a modem, which I've done under Ubuntu (the GNOME applet makes it a snap, but I can't figure out what it's doing on the command-line side of things).
Relevant line from lspci:
ryan@dinosaur:~$ lspci
...
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev ff)
Relevant line from lsusb:
ryan@dinosaur:~$ lsusb
Bus 002 Device 005: ID 0830:0101 Palm, Inc.
...
ifconfig lists only the local loopback and nothing else.I've googled and googled and googled for drivers but can't seem to find any--same for getting the Pre to work as a modem. Like I said, I can get the Pre working flawlessly under Ubuntu but I can't find no matter how much I search the proper way to connect it using Linux.
I Just Installed Linux (Debian 5.0.7) on my iMac G4 powerpc and almost everything works but the sound.
View 2 Replies View RelatedI just tried to install Ubuntu 10.10 x86 on my netbook (Lenovo S12 - Intel at all) but this is just horrible. The system is dead after a few seconds but after I moved the mouse or pressed a key it goes on normally for a few seconds and then it stucks again and so on.
Ubuntu 10.04 had the same problem but it was not that extreme! Maybe it stucks after 2-3 minutes but not after 3-5 seconds! And after I installed all the updates it runs just fine. What can I do? I really love Ubuntu and it's a pitty that I cannot use it.
I've successfully installed Debian testing (squeeze) on my old iMac G3. I didn't select a desktop environment as a preconfigured package, but only left "standard system utilities" checked.Once I rebooted, I logged in as root (on the command line) and ran "apt-get install xfce4 xfce4-goodies gnome-icon-theme xdm", let all that pull in and installd then rebooted. As the system was booting, I could see all the services starting and whatnot, but when it gets to the line "Starting xdm..." the screen changes to black, but stays black for a good 2 minutes. I tried hitting some keys on the keyboard, as well as typingy login credentials, even though I can't see them, but nothing seems to work. I've tried rebooting several times
View 6 Replies View RelatedI have a nearly 10 years old iMac at home and installed Lenny on (somehow, I had to thrash Mac OS 9.2 :-P). Everything was successful until now, but on entering "startkde", the screen fills withkpersonalizer: cannot connect to X serverlines. Upon looking at other threads here I tried mdetect, installing X11... but to no avail
View 14 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI have some music in another language, but when I open the songs in Banshee, their song names just come up as weird characters (like μ).I went to [System --> Administration --> Language Support] and installed support for that language, but the songs still come up like μ. (But in Nautilus, their proper names show).
I know the solution is to change my whole system language to that language, but I don't want to do that, as I am not very fluent in it. Is there any way to enable support for that language while keeping English as the language used to display my desktop?
One computer .... three users .... three languages. How do you make that happen? User A speaks English and is happy with English. No problem. User B needs to use Chinese and would like the full system in Chinese. User C needs to use Thai and Chinese. They would prefer their menus to be in Thai and can use iBus for Chinese entry. How do you set up the system so that each user can select their system language when they login?
View 4 Replies View RelatedI am having issues loggin into Ubuntu 10.04 Lucid GUI. The system Stucks after entering username and passwords.
View 5 Replies View RelatedI'm have some desktop computers sharing my Centos 5 server diskpace through NFS. From time to time, without any warning, lockd bugs and all the users that are using GTK applications like Firefox,Gnome.get stuck.
My first atempt is to restart the NFS, but locked files persist because I can kill the lockd pid process, even using root account , I suppose this is because it's a kernel process. Here is the message error I get when restarting NFS matrix kernel: lockd_down: lockd failed to exit, clearing pid