I have moved /home to it's own partition and all is good. Testing is on sda1 and /home on sda2. However a bit later I wondered what would happen if I had to reinstall testing, would I then have /home on both partitions?
View 4 RepliesI'm having some small lagging problems with my upgrade to 10.10. I haven't done a clean install since 9.04 so I'm thinking of doing one... and I have a few questions.Would making a separate partition at installation be worth it? If so how much run should I set for / ? 10gb? more? less?Also should I create a swap partition? I never use hibernate. Actually whats a good reason anyone would use hibernate on a desktop? on a laptop I could see a few instances but anyway it's shutdown or suspend for me[URL]
View 9 Replies View RelatedMy total filesystem capacity:39.9 GB(used 4.2GB,available:35.7 GB)
Currently,i have only single partition.
i wanna make again a new partition from the single existing partition where root(/) folder stored.
my aim is to separate the home folder from the existing partition to the new partition.
Ok. I have a media server running debian amd64. when I installed it I made separate partitions for root (/) home (/home) var (/var) and swap.
I'm adding some new hardware (mobo and ram) and want to reinstall debian. I would like to keep my home and var partitions intact and just reinstall everything in root (/) partition.
I'm unsure of how to do this during the installation. Do i need to format? how do I tell it to use the /var and /home partitions?
I recently moved /home to a seperate partition. Everything works fine except that when I open a terminal it starts me off in / instead of /home/user
View 4 Replies View RelatedWell i have Debian on, and have been using Wine to use some windows applications, unfortunately the 2 main games i wanted to use don't work on it, and a variety of other applications don't work either. XP is a bit intensive for my laptop, so even though i own it, i can't install it. I wanted to install Windows 98 to my laptop, but there are some issues, and i have no idea how to get around them.
1. My laptop has no CD/DVD drive (has one but doesn't seem to read any disk), it has no floppy drives, and the BIOS does not support booting from USB.
2. When trying to create a seperate partition on my HDD with linux on to try and make room for Windows, it stops me saying the drive is busy.
Specs:
2.8GHZ Pentium 4
ATI Radeon Mobility 7000 IGP 32MB Shared memory
256MB of RAM (217MB due to shared memory)
40GB HDD
2GB USB Storage Device which currently has Windows 98 SE setup files on it.
Has an internet connection via ethernet cable to my brothers laptop. Also have GRUB installed, asks me which OS to boot. Debian Squeeze.
Ideally i wanted to wipe debian off, as its putting my laptop under a bit of strain and can't run what i want it too, or if thats not possible, just split the HDD in 2 and have Windows 98 as my main OS.
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4. Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok". I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
I have two partitions: one for / and the other for /home ; now how do I reinstall ubuntu in the '/' partition so that I can reuse /home as it is?
View 2 Replies View RelatedI'm wiping out / on an Ubuntu box but want to keep everything in /home/, which is mounted on a different partition. Using Code: ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase I have unwrapped the passphrase, resulting in a ~25 character alphanumeric string. Is it possible for me to install from a disk and give the installer the (current) passphrase so that it will automatically mount my home directory?
View 3 Replies View RelatedI tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
How do I ensure that my home partition does not get deleted the next time I reinstall Ubuntu, as I can see there is a choice between formatting the whole drive and manually partition it, but if I reinstall won't I delete the home partition as well?
View 3 Replies View RelatedI recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies View RelatedMy debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedI am currently running XP Pro and am sick of it.
Here's my questions...
1) Can I install Ubuntu over XP or do I have to install it in a seperate partition?
2) If I just pop the disk in, will it do the majority of the work for me (and I won't have to bother you with more questions)?
3) Can I expect any conflicts with running other programs/software and hardware like printers or would I have to run them under XP?
I have an external HD and am running 1.5 gigs of RAM on a Dell Dim E520.
I'm about to do a fresh install on a new computer, and I plan to dual boot with Arch Linux and Ubuntu. I've been doing some reading on Arch Linux, and apparently one of the little tweaks that many Arch users use to increase performance is to put /var/ on it's own partition using a file system that is good for quickly writing many small files, namely, ReiserFS. I was wondering if this would do any good for Ubuntu. Is Ubuntu's usage of /var similar to Arch's, and if so would using a similar partition setup provide any performance increase?
View 7 Replies View RelatedInstalled Ubuntu along with Debian on my Notebook and use Grub Manager to choose between them on startup. Since i like Debian now a lot (in past days it was a very hard system to handle, but there has been some progress i noticed), i have to change some things (want Debian as main system now) For Ubuntu i have: (was meant to be main system on Notebook) "/", "/home" and a "swap" partition, but since i am now going to use mainly Debian, i wanted to store my files all in the "/home"-folder of my extended Ubuntu partition (has much more space available) not in the "/home" folder of the Debian system. So i want both (Debian and Ubuntu) to use the same extended partition ("/home") which i created for Ubuntu to save their files like downloads, videos, and so on.
View 14 Replies View RelatedTrying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI have extended a logical volume from a partition on one disk into a entirely seperatedisk.I wish to extend the file system from the original partition onto the newly extend volume.I attempted this using extend2fs but it did not work, and did not mention why.The command I used was -$ sudo resize2fs /dev/glab1/glab-share1/I attempted this on ubuntu server 10.04.
View 5 Replies View RelatedCurrently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
I want to wipe out my Windows partition and reinstall due to sluggishness. I plan to use Windows instructions as if it was on a hard drive by itself. Will this affect the multi-boot capability or the Linux partition in any way? Would it be easier to reformat and partition the entire hard drive and re-install both OSes? I use OpenSuse 11.2 and Windows XP.
View 6 Replies View RelatedI am trying to copy my hidden files in /home/myusername to another partition. I have also edited /etc/fstab to reflect the change. After reboot, when kdm appears and I try to log into kde, the latter complains that it has no write permissions to write to /home!
The commands I used, are:
To create a directory myusername in the new partition:
To copy the contents of my previous /home/myusername with the new partition mounted on /mnt:
Does anyone know what may be wrong. I am having the impression that it may be because I was root when I used cp and it messed some file permissions, but should it?
I have a 500 GB dual boot debian jessie + windows laptop; I intend to erase windows completely and add the extra space to my existing /home partition. What is the best way of doing it without harming data in my present /home partition?
View 12 Replies View RelatedI have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
I used gparted in PartedMagic to resize my /home partition from 360GB to 160GB, and create a new FAT32 partition out of the remaining 200GB.My /home directory only had about 9GB worth of files in it and as far as I can tell there was no reason for any of them to be anywhere near the portion which was deleted. So the resizing and creating the new partition seemed to go fine. Then I rebooted and it got stuck while booting into Debian.
I tried checking my BIOS for an IOMMU option but there doesn't seem to be one at all. I also only have 4GB of RAM so I don't know why it thinks I have 4.75GB.
I've installed debian squeezy recently and for some reason I have problems with mounting /home partition during startup.
There's an error:Mounting local filesystems...mount: special device /dev/mapper/isw_bbfedcffgi_Volume0p6 does not exist. failed
I've tried using fsck - no result the file system is healthy, I've tried formatting it once again (fresh copy, no user data) and it's not working. What is more mounting the partition manually goes well - I can read the data and write to it. All other partitions are ok.
I have no idea what's going on and why mounting /home fails. I've written this post on Polish debian users forum, but no response - only to give more info, so I'll put it here also:
ls -al /dev/mapper
crw------- 1 root root 10, 59 Nov 9 19:34 control
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume0 -> ../dm-0
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume01 -> ../dm-2
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume05 -> ../dm-3
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume06 -> ../dm-4
code....
I have Lenny installed. How to create, using live-helper customized Live USB with a persistent /home partition on this USB stick, to save changes between boots?
View 6 Replies View Relatedcurrently my installation is on sda1, while /home is on sdb1. I'd like to wipe sda1 and reinstall Ubuntu 10.04 from scratch.
Can I just run the 10.04 installer, reformat sda1, install 10.04 over it, then follow a guide to remount sdb1 to /home (and chown the new /home)?
After working with a more or less stable system I decided to install 11.3 on my system. Atm I am working with a updated 10.3 (prop state is 11.2 now after kernel update) Installed is Gnome, KDE3 and KDE4 - using KDE3
Now the question can I reinstall Opensuse 11.3 to my root partition and keep /home successfully? It is on a separate partition (Doing backup atm also). I understand that I will have to set it as mountpoint during installation. When asked to create user I stopped as I am scared if I add a user with the same name as on my old install it will overwrite the current folder in mounted /home... I seriously like my old username and want to keep it - can i safely add the user during install? will my stuff be still there?
I'm having trouble since I installed the newest kernel update. I only have one desktop. I unistalled compiz. Then I get the message 'you don't appear to have a window manager installed' I reinstalled compiz, but it gives me a misty screen, with the cube desktop. How do I set compiz to a default setting? Plain and simple? Where is the config file? This may have started when I clicked a box 'enable indirect rendering' just to see what happened. I have an nvidia 9200 card on an Asus laptop.Failing that, how do I reinstall Fed 12 without wiping out my home directory?
View 14 Replies View Related