Debian Installation :: Wheezy Install 7.8.0 - Cannot Stay Connected Through WiFi

Apr 2, 2015

I love using wheezy but i keep having to take my computer downstairs to hook it up to router through ethernet, i need it to connect through wifi and stay connected.

heres my problem, if i use live image and connect to network its fine but during installation process it gets to the network configuration, it will keep disconnecting at dhcp and if i try and continue it gives me the error packages broken due to it not staying connected.

MY WIFI CARD IS A TP-LINK WDN 4800

if i try and just do a net install then it doesnt show my wifi network.

it uses in both cases ar93xx atheros driver for installing, i just need to know how i can try and keep a stable connection over wifi so it can install over wifi so i dont have to keep taking pc downstairs to install it.

i done something that stopped me being able to login into wheezy i was left at black screen with blinking command line, i have reverted to mint debian until i can get a stable connection over wifi to install wheezy again.

View 14 Replies


ADVERTISEMENT

Debian Installation :: Canon Mx860 Connected By WiFi To Network

Jan 9, 2016

Loaded Debian Jessie (x64) and when adding printers, can see my printer which attached ok to my RaspberryPi and can print thru it, but can not attach to my Jessie box. If it adds, it can't see it or reports printer is busy, tried every config I could find on the web. Previous versions of Debian I loaded the canon print driver separately and loaded the cnij(?) filter. Do I still have to do that? Is there a trick to getting a network canon to work?

View 3 Replies View Related

Debian Hardware :: Wheezy 32-bit On Thinkpad X40 - WiFi Keeps Disconnecting

Sep 15, 2014

On wheezy 32-bit on thinkpad x40

Code: Select all# tail -30 /var/log/messages
Sep 15 11:52:12 X40 kernel: [  146.227644] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 15 11:52:13 X40 kernel: [  147.005390] UDF-fs: Partition marked readonly; forcing readonly mount
Sep 15 11:52:13 X40 kernel: [  147.017161] UDF-fs: INFO Mounting volume 'Utility_HD-PXTU', timestamp 2010/05/12 14:24 (11e0)
Sep 15 11:52:14 X40 kernel: [  147.821237] NTFS driver 2.1.30 [Flags: R/W MODULE].
Sep 15 11:52:14 X40 kernel: [  147.919521] NTFS volume version 3.1.

[Code] ....

It will be okay for awhile after I unload & reload ipw2200 driver

Code: Select all# lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

View 2 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Debian Installation :: Install Ubuntu 14.04 Alongside Wheezy

Apr 23, 2015

I have a laptop primarily used for a client work. It is running Debian Wheezy, and wish to keep it intact in case I need to do more work for client.

I would like to install Ubuntu 14.04 alongside Debian, and use Ubuntu as a bit of a play/experiment area, etc... HD has lots of space (600GB free), and as far as I can tell Grub is installed in MBR.

I did some searches, and from what I can tell, it sounds like I can just install Ubuntu from ISO file, specify how much space to use (say 400GB), and that's it. This sounds almost too easy. Once I install and restart machine, will there be selection for what Distro to boot.

View 6 Replies View Related

Debian Installation :: Wheezy Sources Not Working After Install?

Apr 7, 2011

I have just installed Wheezy after repartitioning and had to set up my sources list myself as (most of it) was not done for me. I have just added the main official repository,security updates and the multimedia repository. To be honest I'm not sure if any of them are working when I do an update in aptitude, I think the multimedia one might be. The CD ROM isn't even working despite the fact I have done apt-cdrom add.I am getting the following when run aptitude update:

Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1 20110328-05:16] wheezy InRelease
Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1

[code]....

View 6 Replies View Related

Debian Hardware :: Can't Find WiFi Driver For MEDIATEK 7360 In Wheezy

Mar 25, 2014

I've bought a HP Pavilion laptop on which Ubuntu was pre-installed. i had to switch my OS into Debian Wheezy. But now i can't find the wifi driver for my network card. [MEDIATEK Corp. Device 7360].. I tried upgrading kernel to 3.13.6.. But couldn't make my wifi driver work....

View 5 Replies View Related

Debian Hardware :: Ralink RT2501 USB WiFi Adapter Hot And Noisy - Wheezy Freezes

Sep 14, 2014

I've just installed Debian Wheezy on my old Toshiba Satellite A10 (Intel celeron 2.20 GHz, 1GB Ram, 30 GB hard drive) and tried to connect to my home wifi network with a usb wifi adapter (Hamlet HNWU254G). lsusb in terminal says it is Ralink RT2501. Ethernet worked fine, so I installed firmware-ralink package, the adapter was recognized and I was able to connect.

However, I heard quite frequently a strange whistle and realized it came from the usb wifi adapter; it also got very very hot. Other strange thing: the computer some times freezes: screen flickering, loss of control of mouse and keyboard, need to shut down with power button.

At first I thought it was the video card not being powerful enough for Gnome (even classic), but then I installed Xfce4 and nothing changed. Instead, when working offline, freezes happen less frequently (but still happen).

I've tried the usb adapter on another laptop with wheezy: it gets hot, but there are no whistles and freezes.

View 1 Replies View Related

Debian Installation :: Fresh RAID1 Wheezy Install - GRUB Just Does Not Work

Jul 26, 2014

I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.

/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition

/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect

/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /

/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap

update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0

I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.

Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.

setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.

View 3 Replies View Related

Debian Installation :: Select And Install Software Failing In Wheezy Stable

Oct 17, 2014

I am trying to install Debian wheezy 7.6 stable, i made a bootable pen drive with netinst but when it arrives the select and install software part i got a error that i cant know what error is because it does not show its name. Just appear a red screen saying that a part in installation fails: Select and install software. I guess that this error is when it is installing tasksel.

View 2 Replies View Related

Debian Installation :: Wheezy Network Install On Laptop No Keyboard Or Mouse?

Apr 19, 2011

anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there

View 13 Replies View Related

Debian Installation :: Install Wheezy On Any System With Either AMD / ATI 68xx Or 69xx Card?

Aug 26, 2011

Has anyone had any luck in trying to install wheezy (latest testing snapshot available) on any system with either a AMD/ATI 68xx or 69xx card?All goes well in the install, but on reboot, all that is seen is a "_" and no text, and it hard locks.I am pretty sure this is a conflict with the video card drivers that get installed by default (and which should be blacklisted), but I have no idea how to fix it.The recovery mode don't work either, it is the same "_" with no text, and it ends up hard locking. There is no chance at getting access to a console at all.

View 5 Replies View Related

Debian Installation :: Install Cifs-utils On Wheezy Armhf 404 File Not Found

Aug 12, 2014

Install cifs-utils on wheezy armhf
apt-get install cifs-utils --fix-missing
Reading package lists... Done
Building dependency tree
Reading state information... Done

[Code] ....

View 7 Replies View Related

Debian Installation :: No Internet - Wheezy Install On Wiped Acer C720 Chrome

Feb 22, 2015

uname -a
Code: Select allLinux OpalMint 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux

lspci -nnk | grep -iA2 net
Code: Select all01:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
        Subsystem: Foxconn International, Inc. Device [105b:e058]
        Kernel driver in use: ath9k

[Code] ....

View 14 Replies View Related

Debian :: Connected To WiFi But Cannot Open Any Pages

Jan 8, 2016

I have installed network controller driver(iwlwifi) in debian jessie and connected to wifi, but I could not connect to any web sites. I installed network-tools and input "iwconfig" it did show a wlan0 there.

Then I opened resolv.conf ,but there were 2 resolv.conf in my /etc,one contains "search lan nameserver 192.168.199.1",one contains "nameserver 8.8.8.8 nameserver 8.8.4.4".

I changed the content of the first one to 8.8.8.8 and restart networking,but I still could not open pages with wireless network.

And I open the first one again,and it changed back to 192.168.199.1,and an extra line "domain lan"above the line"search lan".

View 6 Replies View Related

Fedora :: Can't Get Internet To Stay Connected With 15

Jul 21, 2011

I am very new to the wonderful world of Linux and from what I've read about and my limited experience (approx. 3 hrs) I like it; but I'm having one problem that I need to get fixed: I'm dual booting currently with W7 (boo) only because I can't get my internet to stay connected(?) for extended periods of time using F15.

When I first installed F15, everything went smoothly, it asked me for my PW for the wireless internet and it said that it was connected. After I loaded Firefox for the first time, thinking to myself "Awesome, it set itself up completely and is running perfectly) I was let down. On my laptop I have Quickbuttons. Touch sensitive buttons above my F-keys (incase you didn't know what I was referring to. When I connect to the internet, with my wireless card on, I can successfully load 1 internet page. Halfway though the page load, the internet light/button starts to flash repeatedly on/off rapidly. Internet connectivity seems to have stopped at this point as I can not load another internet page or use the chat window any more. If I disconnect from my internet and reconnect, everything works fine for 1 more internet page then back to flashing and no more connectivity.

If I restart using the Windows OS, everything works fine and my desktop is working normally as well, so it must be something with F15. What do I need to do in order to get the internet card to work continuously? What am I missing? Please remember, I'm very new to this and all the troubleshooting web pages that I've found thus far are talking WAY above my head.

View 2 Replies View Related

Ubuntu Networking :: 10.10 Won't Stay Connected

Mar 24, 2011

I am running a dual-boot with Ubuntu 10.10 and Windows 7 and I can't stay connected to the internet with Ubuntu, but Windows does. My router is a D-Link GamerLounge DGL-4500. I have wireless internet access for about 10 seconds but then it drops. Access to the router doesn't go away though. Other computers can connect to it just fine, and my computer (Toshiba Satellite A505) has connected to every other one I've tried on. I can still log in to it and change settings and all that, but I can't access the internet through it. I also can't ping the router.

View 1 Replies View Related

Fedora Networking :: NIC Wont Stay Connected?

Mar 31, 2010

Situation: Someone intelligent physically dropped a HD from a dying machine into a newer one, things magically went well (with exception of X, fixed) and now we have this NIC problem. The owners of the server refuse to upgrade to fedora 12 unless there is no other choice, so here I am consulting the experts as I promised i would Ty for your help in advance

[CODE]# netstat -an | grep tcp | egrep -i 'established|time_wait' | wc -l
0
# service iptables status

[code]...

View 1 Replies View Related

Ubuntu Networking :: How To Stay Connected To The Internet

Oct 30, 2010

how to stay connected to the internet?

Here I have

br@ubuntu:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1e:8c:2b:06:8d
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[Code].....

View 5 Replies View Related

Debian Configuration :: Networking: Connected To Wifi, Webpages Won't Resolve?

Oct 2, 2010

I just installed Debian with the latest testing iso, and I'm having problems connecting to the web via browser. I can ping hostnames (i.e. google.com, debian.org, etc.) from the terminal and it resolves just fine, but if I try to load a page from Iceweasel or Epiphany it says the page won't load because it can't resolve the hostname. Can someone tell me what I'm missing?the detail that I'm running amd64. I've checked iptables and found no entries, and for good measure I flushed it to be certain. I also checked resolv.conf but that looked normal, just a nameserver entry pointing to my home router. I'm new to Debian, but have used Linux for years, and I'm genuinely stumped. I'm sure the solution will smack me in the head for its simplicity, but nonetheless I need at least a shove in the right direction.

View 2 Replies View Related

Ubuntu Networking :: 10.10 Won't Stay Connected To Wireless Internet?

Dec 27, 2010

I am running Ubuntu 10.10 on a Dell Dimension 4700 desktop computer. I just upgraded to 10.10 from the previous version after getting my D-Link wireless adapter back after loaning it out. My internet now won't stay connected. I can connect when I firstrn on the computer, with after 2-5 minutes it drops the connection and gives me the "Wireless Network Authentication Required" prompt. It won't connect again without unplugging the adapter and plugging it back in.I borrowed a Belkin wirelss adapter to try it, and it does the exact same thing. PLEASE can someone help me, I really need the internet up on the computer(Also, when I first got the adapter-- while running the old version of Ubuntu-- it would not recognize or connect at all and I spent 4 hours messing with drivers and settings to get it to work, which it did flawlessly. Until I upgraded.)

View 3 Replies View Related

Ubuntu :: Getting Wirelss To Stay Connected Atheros AR5001?

Jun 17, 2011

I have Ubuntu 10.10 on a Toshiba satellite L300 with an Atheros AR5001 wireless network card. I can get the computer to see the network but it wont persist, it keeps going offline or asking to be re connected.Also Firefox will not find the internet even if the wireless icon shows the wireless network is alive.I can use the laptop for the internet if I plug in the LAN cable but have no luck with the wireless. Security for the modem is using WPA&WPA2 and it will connect according to the icon in the title bar for the wireless network.
I have tried the Atheros site for a driver but had no luck finding one. Not even sure if that is what I need to do.

[Code]...

View 2 Replies View Related

General :: New PC / New OS / Inability Stay Connected Wireless In Ubuntu

Jan 19, 2011

I am not new to linux, but brand new to wireless. I partined in Win 7, loaded Ubuntu 10.4 and seemingly on boot I am connected wireless as I am in Win 7. However the moment I open Firefox I am no longer on line. Its not important to discussion, but I am not a avid windows fan and at 80 Linux is my hobby having experienced 8-10 distros.So I hope someone out there has the patience to advise me. Thank you so much for reading my tale of woe

View 5 Replies View Related

Ubuntu Networking :: Wireless Connection Not Stay Connected For Long

Feb 8, 2010

When I turn on the computer, it connects to wireless automatically. That's good. But it doesn't stay connected very long. Especially if I turn on a p2p program or make a call through messenger. Then I get disconnected suddenly and if I want to connect again it doesn't work anymore. Network - You are now disconnected and that's it. Every time it happens I restart the system. I use an Acer Aspire 5738z laptop.

View 1 Replies View Related

Debian Configuration :: WiFi Router Doesn't Give Internet To Other Devices Connected

Oct 21, 2015

When I connect my Debian PC to my WiFi router my PC doesn't get internet if other devices are connected to it .

When i disconnect those devices and connect my Debian PC only then my PC connects to internet but other devices connected to it later do not get inernet connection.

When I connect my Debian PC using LAN Cable to the same router all devices work fine.

View 11 Replies View Related

Ubuntu :: Wireless Card Won't Stay Connected - Iwconfig Says Wlan0 Is Interface

Jun 11, 2010

having trouble with my asus 1000 rt2860 wireless n card and WPA/PSK/WPA2 connections. Funky thing is it worked in the 2.26.32-21 kernel (iwconfig shows ra0 as the wireless interface), but when the kernel was updated and pushed through in the ubuntu updates to 2.26.32-22 the wireless card won't stay connected and iwconfig says wlan0 is the interface. I checked the proprietary drivers and they said that the driver for my card was active, but not in use. How do I use the ra0 instead of wlan0?

how do i use the driver that's listed as not being used? I'm having to boot up lucid with the older kernel now, it's annoying, lots of programs aren't running as expected as a result. I've tried manually installing the driver from the RaLink website as detailed in many other posts concerning this wireless card. It seems to work for some people, but not with me.

View 1 Replies View Related

General :: Serve Ssh Connection To Wifi Devices While Connected To A Wifi Network

Jul 21, 2010

I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.

View 1 Replies View Related

Debian Installation :: NVIDIA Quadro NVS 295 - Make Sure During Installation That GRUB Gets Configured To Stay In Character Mode Only?

Mar 2, 2011

I am trying to get Debian 6 to work on an hp Z400 - the problem is that it came with a NVIDIA Quadro NVS 295 graphics card; there may be a driver for Linux, but it doesn't matter, because GRUB insists on switching to some sort of graphics mode and the screen just blanks and switches itself off. Is there any way to make sure during installation that GRUB gets configured to stay in character mode only?

View 6 Replies View Related

Debian :: Can't Install JDK 8 In Wheezy

Apr 19, 2015

I dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:

Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$

I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....

Code: Select alllrwxrwxrwx 1 root   root          22 abr 19 18:57 java -> /etc/alternatives/java

I've tried different tutorials I found surfing the web but none of 'em seem to work.

View 2 Replies View Related

Debian :: Install Octave 4 In Wheezy

Nov 19, 2015

I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure

checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no

configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.

I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved