So, I made a bash script that I need to be executed on booting, I created it in /etc/sbin/mount_folder.sh
Code:
sudo chmod +x mount_folder.sh
sudo ln -s mount_folder.sh /etc/init.d/mount_folder.sh
Then I try to:
[Code].....
Also, if I create the symbolic link in the same folder I can execute it normally
I'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
I am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
So I was looking around for something to auto log me in. I only have the basic Debian system...no X...just command line.
Anyway, I try mingetty and it looks like I've broken it. I'm using this as an NFS server to store my music which I have up and running. It seems that it works even when I'm not logged in (I didn't know that at the time). Now when I start my computer it shows INIT: cannot execute "/sbin/mingetty" and it shows that 10 times, then I get: INIT: Id "1" respawning too fast: disabled for 5 minutes
It seems that it's just going to keep doing that and wont stop
I followed this article: [URL]
I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem.
It failed to boot and got this message: no init found. try passing init= bootarg
The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
me the difference between /etc/init.d scripts and /etc/init.d/rc?.d scripts.
View 3 Replies View RelatedWhile I was using my computer a few days ago, the terminal stopped working properly, so I tried to reboot, and when it started up again it wouldn't boot and said "no init found. try passing init=bootarg"
This has happened twice before, so I really need to figure out what keeps happening, otherwise I can't continue to use linux. i reinstalled both times before. i think that this is caused by a process that prevents me from using the hard drive, because when I try to check the disk in the terminal or in gparted, it says Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program?
Also, in the disk utility, in the lower right corner of the filesystem it has a spinning "loading wheel".(i'm not sure if that means anything)
I am using ubuntu 10.10, but am not sure what kernel I am using, but i tried a few different kernel options(there's three of them at start up). safe mode does not work either.
I have written an init script and placed it in /etc/init.d/ directory.What I would like to know is, will the script run automatically or we need to install the script using "install_initd" command.If I have to invoke this command manullay, what will be the best place to do this ? Can I add this to "/etc/init.d/rcS" file
View 6 Replies View RelatedopenSUSE 10.3 on Itronix IX260+ Stuck on command line, init 3, and all attempts at graphic init 5 fail. Get these messages:(EE) No devices detected; Fatal screen error: no screens found; AIGLX disabled Primary Device is PCI 01:00:0kernel:device-mapper:multipath round-robin:version 1.0.0 loaderkernel:device-mapper:table:253:0:multipath: error getting device
kernel:device-mapper:ioctl: error adding target to tableProblem would seem to be with the device-mapper, but have no idea how to fix it.
Im am building a Linux distro. It will be very tiny and fast.
I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.
The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.
When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.
The kernel works OK with others initramfs/initrd files. But not with my own.
Quote:
Here is how the end of the kernelcomplie look like.
Quote:
Here is my init file who is the initrd/initramfs source.
Quote:
The initramfs folder contains "bin" (folder) and "init" a file. No more.
The problem is that the kernel cannot find/read init file.
i created a /tmp partition amd mounted it like this:" mount -o loop,noexec,nosuid,rw /usr/tmpDSK /tmp"
I know i can't execute things in /tmp now but is there a way to execute only one file and no more???
How can be changed a symlink from the /etc/rc2.d directory.I want tho change the time of start from S20 to S60.
View 1 Replies View RelatedI have a server with my music on it. There is a network share where all my machines can access that music. In the past I have created a link inside the Music folder of each user/machine which links to the Samba share. I have been doing this by linking to /home/[username]/.gvfs/share on server.
In 8.10 I am able to drag and drop to create the necessary link from Music to share on server. With maybe 9.10 I lost the ability to drag and drop the link and had to resort to the command line ( ln -s "/home/[username]/.gvfs/share on server" /home/[username]/Music ). With 10.10 I don't seem to be able to create this link using any method. (Any link which is created is linked to / .) (After 8.10 admin rights are required to create the link from ~/.gvfs/whatever.) This method is very handy as all of the machines and users point to the exact same location for their music (~/Music/share) and if I can't create that link this system of organization fails.
how to undo this?
"Simply change the symlink so that it points to /bin/bash. To do this, open a terminal, and type the following:
sudo rm -f /bin/sh
sudo ln -s /bin/bash /bin/sh
From now on your scripts should work as their authors expected."
I have mounted a samba share on my desktop from a remote server (with smb4k). There I created a symlink to "/". When I open the symlink with konqueror it opens the right one (the root directory of the server), but when i open this link with the shell (cd rootfs/), then it opens my local root directory (of my host)... Is it possible to open the right link with the shell?
View 1 Replies View RelatedI'm running a clean install of Lucid on a new HD. I've moved over all my old data and files from the previous Karmic system, and am having trouble with a directory full of symlinks. This is a collection of links into my photographs, which I use for wallpaper with Desktop Drapes, and the directory has 1300 symlinks which now point to the wrong place.
I only need to change the first part of the link target:
/oldplace/somedir/subdir/photo.jpg
into:
/newplace/somedir/sudir/photo.jpg
I believe this needs the application of _ ln _ in a terminal to re-write the symlink, and the use of a bash line including _ if . . fi _ or possibly _ IFS _ ? I might also need to use _ sed, - but I'm not sure of the syntax for this.
I have a docs partition with my music on it. I replaced the Music folder in the system's home folder with a symlink pointing to the music folder on the docs partition, but the special music icon has now disappeared (it just looks like a regular folder).
View 3 Replies View RelatedI have been using pidgin on windows XP with .purple on another networked computer [also win XP]. in windows you can set the environmental variable to change the location of purplehome to the //windows_share/.purple and it 'just works' I am now trying to replicate this using ubuntu 10.04 LTS I need some answers: should a symlink be used? should it be added to fstab? should properties, command be changed in pidgin? I have tried all of these but I must not be doing it right cos it is not working! Trust you can help me out on this. I am a relative newbie but have been using ubuntu for a year or so, just never sorted this one out.
View 1 Replies View RelatedIf I have the below sudoers entryusera ALL=(userb) NOPASSWD: /home/userc/bin/executable-fileusera ALL=(userb) NOPASSWD: /home/userc/bin/link-to-another-executable-fileWhen I log-on as usera and try running the below commands, it workssudo -u userb /home/userc/bin/executable-filebut NOT the one below.sudo -u userb /home/userc/bin/link-to-another-executable-fileSorry, user usera is not allowed to execute '/home/userc/bin/link-to-another-executable-file' as userb on hostname.
View 1 Replies View RelatedIn my MIDI music collection, I have a "best" folder with duplicate copies of only my favorite files. Recently I thought, why waste memory with duplicates--can't I just put symlinks in the "best" folder? So I tried to, in Konqueror. It would only let me make the symlinks from the Konqueror superuser account.
View 4 Replies View Related2.6.38-8-generic
Mint 11 64 bit
I'm trying to move a file from a directory to another one and create a symlink but seem to be doing something wrong. Have done "man ln" and looked up info in coreutils but I don't seem to be able to get it right. There are two files in ./home/jim/.config/banshee-1/ that I want to move to ./home/jim/Dropbox/banshee. I have created backups of both and created the new folder in Dropbox. see attached screen shots. I then run
Code: jim@saturn ~ $ sudo ln - ./home/jim/Dropbox/banshee/banshee.db ./home/jim/.config/banshee-1/banshee.db
ln: creating symbolic link `./home/jim/.config/banshee-1/banshee.db': No such file or directory and get the above error message. Now I know symlinks do not need to be complete at the time of creation, but I'm not sure if I have done this right or not and if I try and read and write banshee.db at the original location if it will do it properly and efficiently. Is this a case where I should do a hardlink instead and have both files. If I want to do this every time at start up, how do I automate the commands once I have them right?
if it is possible to copy and paste as a symlink.
It seems to me that the only way to create a shortcut or symlink is through the command line. I use KDE.
This was one of the most basic things Windows could do since Windows 95, and is one of the simplest shortcuts I dearly miss since leaving Windows.
I have a directory containing files and symlinks to files elswhere. I make a copy of the directory like this:
cp -rp dir/* new_dir
The files in new_dir have their original timestamps, but the symlinks have the current time. touch -t does not operate on the symblink but on the files they reference. Is there a way to set the timestamp of the symlink to a time in the past?
I have been using linux for about 4 months now and decided i fancy the challenge of building a LFS system(Using book version 6.7). I have got all the way up to the point of gcc being installed and then have to create the symlink to libgcc.a
Now i have typed in the command and tried copy and pasting but i always get the following output:
Code:
Now it cannot find -gcc it appears but states at the bottom ./libgcc.a file exists.
If its a fatal error or what I can do to possibly correct it!
I have a dual-boot setup with Ubuntu and Windows 7, sharing an NTFS file system.If I create a new folder (called "newfolder") in the root of my Windows 7 partition, with a text file called newtextfile.txt, and then create a symlink in Ubuntu with ln -s /media/S3A8115D003/newfolder.I can then see, read and edit "newtextfile. txt" from Ubuntu, until I log out and reboot.After I reboot, the symlink to newfolder still appears to be there but when I try to access it, I get This link cannot be used, because its target "media/ S3A8115D003/ newfolder" doesn't exist.However, if I first navigate in the file manager to the Windows folder S3A8115D003/ newfolder and view its contents, then the Ubuntu symlink appears to be healed.How can I make the symlink work without first having to touch the target file with the file manager?
View 8 Replies View RelatedI have a CMS I have developed, which will run on several sites all hosted in sub directories on my dedicated server. I want to create symlinks for the main files of the CMS, including all config files, functions and admin sections. Then there will be a few files specific to each site.I read some tutorials on creating symlinks, although most are not very good in my opinion.
Do you have to create a symlink for every file I want to include? Or can I just create a symlink to a directory? For example:CMS is located at /www/cms/.Can I make www/domain1/ point to that directory, and if so, will all files include themselves correctly. I think I am a bit confused on how this works.
Because I am working with some 3d software, and to be able to start it I need to symlink libGL.so.1 and libGL.so.1.2 from /usr/lib64/ to libGL.so.1 and libGL.so.1.2 from /usr/lib64/catalyst/ folder. I move existing libs to new names by adding .bak at the end of file name.
But everytime I restart machine soemthing changes libGL.so.1 linking from libGL.so.1.2 (in catalyst folder) to libGL.so.1.2.bak (in usr/lib64/ folder), original file. And I can not start 3d software. Can I stop that from happening somehow? Why is that happening at all?