before debian started using grub2 it was very easy to specify a loader from another partition but since grub2 came out it's a lot more complicated, you can no longer edit a text document menu.list, is there an easy way to edit the grub2 boot-loader to boot FreeBSD operating system since it doesn't recognize it from update-grub
View 14 RepliesI had 40 gb of unused space at the beginning of my drive, then a 15gb primary ext3 partition for /, then a 100GB ext4 primary partition for /home, then a 4 gb extended partition that contains two 2 gb swap partitions.
I installed FreeBSD on the empty space at the beginning of the drive. The slice I created did not start on the first block. There were a few MB of free space before and after it.
After the installation finished (with no errors), grub would hang on the "Grub loading/Welcome to Grub screen". I booted a squeeze CD in rescue mode and reinstalled grub to /dev/sda. After rebooting, Grub still hangs at the same place.
I booted a live CD and checked the output of fdisk. For each of my partitions, it says "Partition does not end on cylinder boundary". I am hoping that whatever happened to my disk is not recoverable. Fortunately, I backed up some essential files beforehand, but I still don't really want to lose my old squeeze system.
Right now I am fscking all partitions.
Adding freebsd to grub bootloader
[URL]
i had windows 7 on my system and now i installed debian squeeze but grub does not show my windows 7 in menu for selecting
View 1 Replies View RelatedI have a triple boot system with Windows XP, Debian Lenny, and Fedora in that order as far as the disk partitions, and Lenny's grub controlling the multiboot. This has worked well for yearsRecently the Debian got corrupted with someependency issues, and I want to install Squeeze inplace of the existing LennyI don't need to save anything from the Lenny). Is this possible, usinga startup install CD for on-line installation of Squeeze over the Lenny partitions, and also without disturbing the Windows and Fedora boots? If it is, are there any manual steps to be taken during
the installation?
I have a computer that runs debian 6, and i want to make a dual boot system where i can boot either with or without desktop. AS default the server will be booting in console (headless) mode (and act as server) but on some occasions i do want to bootup in desktop.
I know starting GDM (in my case the desktop manager) is just a simple task, but i would like to have 2 options in boot menu:
1 - without desktop default (timeout 5 seconds)
2 - with desktop
what would be the correct grub config entries?
Just a quick question as I re-familiarize myself with apt-get again. So far, have had no luck finding what I am trying to do (back to the man page) Basically, after doing a 'apt-get update' command, was it possible to see what packages have newer versions and can be upgraded?
For example, I am working with a system that has BASE 1.4.3 installed, and I know there is a newer version out (1.4.4), but want to make sure that is in the repository. Does apt-get have something similar to portmaster in FreeBSD? Where it tells you what version you have installed, and what version is available to download?
I want to install FreeBSD (PC-BSD) alongside Ubuntu 10.04 and Windows 7. I do not have a CD or a DVD or a USB key to burn the .iso, so I was thinking instead of using Grub2 to launch it.
I created an empty partition where FreeBSD will be installed (see screnshot below).
Now, where should I locate the .iso file? On my root partition? On my home partition? On the new partition (ZFS formatted)? Does it matter?
How should I set up my Grub2? I was thinking of adding this to /etc/grub.d/40_custom (if the partition where the .iso is located is /Home):
Quote:
menuentry "FreeBSD" {
insmod loopback
insmod iso9660
set isofile="~/iso/PCBSD8.0-x86-DVD.iso"
loopback loop (hd0,1)$isofile
}
Is it correct... and enough info?
Before I add FreeBSD to my laptop. Right now it's happily dual booting with 10.04 and 7
I used to use this great guide. [url]
Of course because of (the hated) GRUB2 it is now useless.
This is a humbling experience for a long time MS admin/tech.I am wanting to build a file server fr my home network. So, I downloaded and installed FreeBSD 8.1 last night.Wanting a more familiar interface, I downloaded and tried to install KDE. It loads and asks for language. Then I select "Install kubuntu".
The kubuntu logo and a progress meter pop up for a while. Eventually the screen goes black and nothing else happens. I have to reboot. If I take the CD out it boots to FreeBSD.Am I missing something? Kubuntu never asks anything regarding partitioning. Is FreeBSD an os like DOS and kubuntu a GUI like Win 3.1 or is kubuntu more like XP with a GUI built in to the os? If it is the latter, how do I get it to kill the FreeBSD install?"Try kubuntu without installing" does the same thing.
wanted to try out FreeBSD but I want to boot it from an ISO. I put my iso file on my first hd 3rd partition in /boot/iso/FreeBSD-8.1-RELEASE-amd64-dvd1.iso. But I can't seem find anything to boot freebsd this way. Is it possible and if so how. This is what I kinda got but its not working.
Code:
menuentry "FreeBSD1" {
insmod loopback
[code]...
i have recently installed freebsd 8.0 after using ubuntu for about a year and a half. I have installed X11 and have tried to configure it as best as i can. when i run startx i just get a black and green screen.i configured the Monitor and Screen section of my xorg.config file as follows
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
[code]....
Its my third week struggling to install mrtg on freebsd 8.0. I will be happy if someone can provide me with a HOW TO documentation on the issue. i would like to monitor my routers(bandwidth utilisation).
View 1 Replies View RelatedI'm having trouble configuring grub2 to boot freebsd. I know how to do it in grub, but grub2 is giving me grief.
View 3 Replies View RelatedSometime in the next few weeks the office I just started working in wants me to switch their file server over to Ubuntu, from FreeBSD. I am a little scared of doing this, seeing as how I came into this job with no documentation of the network/hardware that I will be primarily working with. Does anyone have any useful tips/links that would be relevant to my task? So far, I have copied over the following files from the FreeBSD server:
/usr/local/etc/smb.conf
/usr/local/etc/smbldap-tools/smbldap_bind.conf
/usr/local/etc/smbldap-tools/smbldap.conf
/usr/local/etc/ldap.conf
/usr/local/etc/ldap.secret
I've made an Ubuntu samba server before, so I was kind of off-put by those file locations on the FreeBSD server.
Being new to Linux I am not sure of which Virtual software to use in my Opensuse Linux? I want to try FreeBSD again but I want to use some type of Virtual Machine .
View 3 Replies View RelatedI have a freebsd server and I want to add the expiry date through the normal user(not through the su).
View 2 Replies View RelatedEarlier today, I tried to install FreeBSD. If anyone here has done this, I think I went wrong at the part where it asked if I wanted to edit the Master Boot Record. In any case, now when I turn the computer on, it boots into FreeBSD instead of into GRUB. Now I have no access to Ubuntu or Windows, and I have no internet on FreeBSD. How can I fix the MBR so that it boots into GRUB instead of FreeBSD? I want my Ubuntu back...
View 2 Replies View RelatedI don't want to have to download the kernel source and uncomment out CONFIG_UFS_FS_WRITE=yes and build a custom kernel ever time I update the kernel. Is there a better way? Like when Ubuntu.deb repositories claim a stable kernel is there an auto config script when installing from synaptic -or- aptitude? Like any way to add this one config opt to .deb kernel W/O building custom one from source?
View 3 Replies View RelatedI am going to install unix FreeBSD But someone told me you must installed it on primary partition. However I have Win 7 installed on laptop, others partition are logic so is it possible to create or change one unused partition as primary.
View 1 Replies View RelatedHow to configure rsync client on ubuntu and freeBSD? i cant pull my backup files from freeBSD and Ubuntu to my NAS server.
View 1 Replies View RelatedFor about 15 minutes or so after login on my FreeBSD 8.1 (yes, I know its not Linux) the hard drive goes absolutely crazy with activity. So much so that it takes a while for the ls command to read the contents of the directory. But after the 15 minutes or so the disk activity calms down and returns to normal.
Im thinking it is some sort of fsck command, but I am unsure where or how to disable it. The hard drive is connected via sata to the mobo. Im not quite sure what other info I can post to find out what is going on. Just tell me what other info is needed and Ill post it up.
I've just installed FreeBSD 8.1 on /dev/sda4 (FreeBSD slice), without installing the boot loader from FreeBSD (I've selected None when prompted for boot loader in sysinstall). Now I want to use my existing Grub2 from already installed Ubuntu 10.10 to boot FreeBSD also.
After some reading, I've added to the end of /etc/grub.d/40_custom:
After running sudo update-grub, grup.cfg file shows my new entry. The problem is that after restart, I don't see the new entry in the grub menu.
Another question, If i used chainloader +1, that means I need to have the FreeBSD bootloader installed also on /dev/sda4 right? For chainloading booloaders?
I didn't get to that step, I first want to see the entry in the menu.
Any idea what I might be missing/misdoing? (I also checked for blank spaces in the menuentry like the wiki for grub2 says)
I am new comer in this forum and the beginner on freeBsdI have a problem on how to implement the spam filter program on mail server, the problem is i have no idea on how to implement and test the spam filter program on the mail server and where should i put the program? is it in pop3?
View 3 Replies View RelatedCan anyone tell me if there is a port of the FreeBSD PPP daemon called MPD5? I would like to run this on my CentOS installation as I understand this is better than pptpd?
View 1 Replies View RelatedI am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies View RelatedI have an OpenBSD and a FreeBSD system and a mac. I also have a Linux server. What i would like to do is back up all these systems to an external hard-drive using rsync when the external usb disk is connected to my linux box.If i format the external usb disk with cfdisk and the create a non-bootable ext3 file system on this external disk and create and put all the necessary public keys on the Linux box then from the BSD's or the mac issue the command:
Code:
Will this back up the entire systems so that they can be restored in the event of an emergency? I should store each OS just in a separate disk file of the external usb drive each time right? Because i would rather not have to format the external usb drive for each different OS. Would this work? and would the restoration command for these BSD's be:
Code:
I just need to know the basics. I'm sure given that i'll be able to automate the process. I don't want to clone the disks for forensics. I just want to have a way of restoring to a clean OS. This is the most basic question:All the howto's never mention whether or not you have to have an rsync server running on the machine your backing up to. So do you just push or pull from one end of the connection only or do you have to have a client at one end and a server at the other, as is traditional?
I have a USB PenDrive (FAT32 file system) that has 2 boot options. Boot option 1 = runs a program that updates my BIOS. Boot option 2 = runs a program that executes a basic hardware test on the PC. I don't need to access any HDD or load any operative system. the pen drive is using a DOS bootstrap (like the one you obtain when you format a device using /s option under DOS).
Can I use an advanced graphical bootloader to accomplish the same thing? It would be nice to have a background bootsplash logo of the company, while the user selects one of the two boot options, using the cursor keys. Just like GRUB...
I just got a new netbook and want to install several distro's to play with so would appreciate any advice you have. I have a 160gb drive so was going to dedicate 10gb to each distro and to xpsp3 that is comes with and about 2-4 gb for meego. Here are the distro's i want to install if possible...I am in love with KDE again so starting with Kubuntu
the last 100gb I was wanting for mp3/movies/docs.i was planing on putting the 100gb in NTFS so it could be shared with each OS? Not sure if that is possible or if there is a better solution but i want to be able to access the files from each os - in linux you just mount that partition to access it? and then i would also be able to access it via windows. I am assuming windows cannot see the ext3 file system and/or it is easier to use NTFS?right now xpsp3 is installed so not sure if can back it up via usb or if i can just download a version and burn a cd as i have a key and use WinToFlash to put it on a flash drive or can i just make partitions leaving the xpsp3 install on the netboot?
Any opinions on filesystem / order of installs / how much drive space is ideal per distro / is it even possible for that many os's / which boot loader to use?
I've been running windows xp and ubuntu 10.4 on a dual boot for a bit now and decided to add the intel version of osx to my multi boot. I created a partition and installed osx without any problems. The only problem is, now when I turn my pc on all it sees it windows xp and I don't no enough to know how to fix it. How can I sort this problem out? If I cant get it all working, I at least want to get xp and ubuntu back to normal.
View 6 Replies View Related