i have recently installed freebsd 8.0 after using ubuntu for about a year and a half. I have installed X11 and have tried to configure it as best as i can. when i run startx i just get a black and green screen.i configured the Monitor and Screen section of my xorg.config file as follows
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
[code]....
Its my third week struggling to install mrtg on freebsd 8.0. I will be happy if someone can provide me with a HOW TO documentation on the issue. i would like to monitor my routers(bandwidth utilisation).
View 1 Replies View RelatedIs there a Linux HOWTO for setting the xorg.conf file and installing drivers?
View 1 Replies View Relatedbefore debian started using grub2 it was very easy to specify a loader from another partition but since grub2 came out it's a lot more complicated, you can no longer edit a text document menu.list, is there an easy way to edit the grub2 boot-loader to boot FreeBSD operating system since it doesn't recognize it from update-grub
View 14 Replies View RelatedJust a quick question as I re-familiarize myself with apt-get again. So far, have had no luck finding what I am trying to do (back to the man page) Basically, after doing a 'apt-get update' command, was it possible to see what packages have newer versions and can be upgraded?
For example, I am working with a system that has BASE 1.4.3 installed, and I know there is a newer version out (1.4.4), but want to make sure that is in the repository. Does apt-get have something similar to portmaster in FreeBSD? Where it tells you what version you have installed, and what version is available to download?
I want to install FreeBSD (PC-BSD) alongside Ubuntu 10.04 and Windows 7. I do not have a CD or a DVD or a USB key to burn the .iso, so I was thinking instead of using Grub2 to launch it.
I created an empty partition where FreeBSD will be installed (see screnshot below).
Now, where should I locate the .iso file? On my root partition? On my home partition? On the new partition (ZFS formatted)? Does it matter?
How should I set up my Grub2? I was thinking of adding this to /etc/grub.d/40_custom (if the partition where the .iso is located is /Home):
Quote:
menuentry "FreeBSD" {
insmod loopback
insmod iso9660
set isofile="~/iso/PCBSD8.0-x86-DVD.iso"
loopback loop (hd0,1)$isofile
}
Is it correct... and enough info?
Before I add FreeBSD to my laptop. Right now it's happily dual booting with 10.04 and 7
I used to use this great guide. [url]
Of course because of (the hated) GRUB2 it is now useless.
This is a humbling experience for a long time MS admin/tech.I am wanting to build a file server fr my home network. So, I downloaded and installed FreeBSD 8.1 last night.Wanting a more familiar interface, I downloaded and tried to install KDE. It loads and asks for language. Then I select "Install kubuntu".
The kubuntu logo and a progress meter pop up for a while. Eventually the screen goes black and nothing else happens. I have to reboot. If I take the CD out it boots to FreeBSD.Am I missing something? Kubuntu never asks anything regarding partitioning. Is FreeBSD an os like DOS and kubuntu a GUI like Win 3.1 or is kubuntu more like XP with a GUI built in to the os? If it is the latter, how do I get it to kill the FreeBSD install?"Try kubuntu without installing" does the same thing.
wanted to try out FreeBSD but I want to boot it from an ISO. I put my iso file on my first hd 3rd partition in /boot/iso/FreeBSD-8.1-RELEASE-amd64-dvd1.iso. But I can't seem find anything to boot freebsd this way. Is it possible and if so how. This is what I kinda got but its not working.
Code:
menuentry "FreeBSD1" {
insmod loopback
[code]...
I had 40 gb of unused space at the beginning of my drive, then a 15gb primary ext3 partition for /, then a 100GB ext4 primary partition for /home, then a 4 gb extended partition that contains two 2 gb swap partitions.
I installed FreeBSD on the empty space at the beginning of the drive. The slice I created did not start on the first block. There were a few MB of free space before and after it.
After the installation finished (with no errors), grub would hang on the "Grub loading/Welcome to Grub screen". I booted a squeeze CD in rescue mode and reinstalled grub to /dev/sda. After rebooting, Grub still hangs at the same place.
I booted a live CD and checked the output of fdisk. For each of my partitions, it says "Partition does not end on cylinder boundary". I am hoping that whatever happened to my disk is not recoverable. Fortunately, I backed up some essential files beforehand, but I still don't really want to lose my old squeeze system.
Right now I am fscking all partitions.
I'm having trouble configuring grub2 to boot freebsd. I know how to do it in grub, but grub2 is giving me grief.
View 3 Replies View RelatedSometime in the next few weeks the office I just started working in wants me to switch their file server over to Ubuntu, from FreeBSD. I am a little scared of doing this, seeing as how I came into this job with no documentation of the network/hardware that I will be primarily working with. Does anyone have any useful tips/links that would be relevant to my task? So far, I have copied over the following files from the FreeBSD server:
/usr/local/etc/smb.conf
/usr/local/etc/smbldap-tools/smbldap_bind.conf
/usr/local/etc/smbldap-tools/smbldap.conf
/usr/local/etc/ldap.conf
/usr/local/etc/ldap.secret
I've made an Ubuntu samba server before, so I was kind of off-put by those file locations on the FreeBSD server.
Adding freebsd to grub bootloader
[URL]
Being new to Linux I am not sure of which Virtual software to use in my Opensuse Linux? I want to try FreeBSD again but I want to use some type of Virtual Machine .
View 3 Replies View RelatedI have a freebsd server and I want to add the expiry date through the normal user(not through the su).
View 2 Replies View RelatedI installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
I need to install "xorg-dev" package as a prerequisite for one program but when I try
sudo apt-get install xorg-dev it gives me the following errors
Quote:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
And my /etc/apt/sources.list files looks like following:
Quote:
And I have upgraded my system from ubuntu 7.? to 8.04 .
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
Earlier today, I tried to install FreeBSD. If anyone here has done this, I think I went wrong at the part where it asked if I wanted to edit the Master Boot Record. In any case, now when I turn the computer on, it boots into FreeBSD instead of into GRUB. Now I have no access to Ubuntu or Windows, and I have no internet on FreeBSD. How can I fix the MBR so that it boots into GRUB instead of FreeBSD? I want my Ubuntu back...
View 2 Replies View RelatedI don't want to have to download the kernel source and uncomment out CONFIG_UFS_FS_WRITE=yes and build a custom kernel ever time I update the kernel. Is there a better way? Like when Ubuntu.deb repositories claim a stable kernel is there an auto config script when installing from synaptic -or- aptitude? Like any way to add this one config opt to .deb kernel W/O building custom one from source?
View 3 Replies View RelatedI am going to install unix FreeBSD But someone told me you must installed it on primary partition. However I have Win 7 installed on laptop, others partition are logic so is it possible to create or change one unused partition as primary.
View 1 Replies View RelatedHow to configure rsync client on ubuntu and freeBSD? i cant pull my backup files from freeBSD and Ubuntu to my NAS server.
View 1 Replies View RelatedFor about 15 minutes or so after login on my FreeBSD 8.1 (yes, I know its not Linux) the hard drive goes absolutely crazy with activity. So much so that it takes a while for the ls command to read the contents of the directory. But after the 15 minutes or so the disk activity calms down and returns to normal.
Im thinking it is some sort of fsck command, but I am unsure where or how to disable it. The hard drive is connected via sata to the mobo. Im not quite sure what other info I can post to find out what is going on. Just tell me what other info is needed and Ill post it up.
I've just installed FreeBSD 8.1 on /dev/sda4 (FreeBSD slice), without installing the boot loader from FreeBSD (I've selected None when prompted for boot loader in sysinstall). Now I want to use my existing Grub2 from already installed Ubuntu 10.10 to boot FreeBSD also.
After some reading, I've added to the end of /etc/grub.d/40_custom:
After running sudo update-grub, grup.cfg file shows my new entry. The problem is that after restart, I don't see the new entry in the grub menu.
Another question, If i used chainloader +1, that means I need to have the FreeBSD bootloader installed also on /dev/sda4 right? For chainloading booloaders?
I didn't get to that step, I first want to see the entry in the menu.
Any idea what I might be missing/misdoing? (I also checked for blank spaces in the menuentry like the wiki for grub2 says)
I am new comer in this forum and the beginner on freeBsdI have a problem on how to implement the spam filter program on mail server, the problem is i have no idea on how to implement and test the spam filter program on the mail server and where should i put the program? is it in pop3?
View 3 Replies View RelatedCan anyone tell me if there is a port of the FreeBSD PPP daemon called MPD5? I would like to run this on my CentOS installation as I understand this is better than pptpd?
View 1 Replies View RelatedI am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies View RelatedI have an OpenBSD and a FreeBSD system and a mac. I also have a Linux server. What i would like to do is back up all these systems to an external hard-drive using rsync when the external usb disk is connected to my linux box.If i format the external usb disk with cfdisk and the create a non-bootable ext3 file system on this external disk and create and put all the necessary public keys on the Linux box then from the BSD's or the mac issue the command:
Code:
Will this back up the entire systems so that they can be restored in the event of an emergency? I should store each OS just in a separate disk file of the external usb drive each time right? Because i would rather not have to format the external usb drive for each different OS. Would this work? and would the restoration command for these BSD's be:
Code:
I just need to know the basics. I'm sure given that i'll be able to automate the process. I don't want to clone the disks for forensics. I just want to have a way of restoring to a clean OS. This is the most basic question:All the howto's never mention whether or not you have to have an rsync server running on the machine your backing up to. So do you just push or pull from one end of the connection only or do you have to have a client at one end and a server at the other, as is traditional?
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
my laptop is running Slackware64 13.0. Today I tried to update to X.org 7.5 (version 1.7.1) from version 1.6.3 shipped with Slackware. I downloaded the relevant source tarballs from www.x.org and compiled them with no errors. The compiled packages are:
xorg-server-1.7.1
xf86-input-synaptics-1.2.0
xextproto-7.1.1
xcmiscproto-1.2.0
[code]....
My laptop has an NVIDIA graphics card and I'm using the proprietary driver from NVIDIA. Thus I reinstalled the driver after the update and tried to launch X.org with "startx". After a short while the NVIDIA logo appears for some hundred milliseconds and disappears then. But now the screen is blank and it is not possible to switch to another VT via Ctrl+Alt+Fx. But it is possible to login from another computer and restart everything, so that I conclude that the system does not hang.
It is even possible to do work normally with the laptop from remote. If I try to kill the X-server, it ignores SIGTERM and has to be terminated by SIGKILL. But the laptop's screen stays black and empty and does not allow to switch to another VT (chvt terminates with "interrupted system call."). dmesg does not give any errors.
/var/log/Xorg.0.log:
Code:
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
[code]....
