Debian Hardware :: Ps/2 Mouse Does Not Work On First Boot?
Jan 18, 2010I have a debian and an ubuntu (2 computers) that acts strangely. The mouse doesn't work on power on. I have to restart the computers to make the mouse work
View 1 Replies
ADVERTISEMENT
Debian Multimedia :: USB Mouse Won't Work?
Mar 19, 2011A client of mine brought a Dell Inspiron 1501 laptop with Debian Lenny + KDE3.5 installed.The problem is that USB mouse won't work, no matter which USB port is used. If I move the mouse, after 5-6 seconds, the arrow moves a bit and that's all. We have tried 3 different mice; one is mine which works flawlessly on my Linux installation (btw: the laptop has its OS installed by me)USB keyboard works with no issues.I have tried the following but with no results:
1. upgraded BIOS
2. recompiled kernel
3. commented the "blacklist usbmouse" in /etc/modprobe.d/blacklist so it could load the old driver
4. as last resolt I also disabled USB legacy support in BIOS
PS: The OS will not be upgraded to Squeeze because she is not staying in the country and later support for unpleasant suprises is not possible.
Debian :: Bluetooth Mouse Doesn't Work In Wheezy
Aug 3, 2011I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
Debian :: 6 32-bit (i386) And VMWare Unity - Mouse Won't Work?
Feb 23, 2011Installed Debian 6 (latest stable, downloaded today) i386 under VMWare 7.1. Installed VMWare tools. However, when i activate Unity my mouse won't work at all in guest OS windows, it will only work as if i was pointing to guest desktop. It is all ok in Workstation window.
Unfortunately, there is no xorg.conf, and when i attempt to re-create it using Xorg -configure, the resulting file is unusable, i.e. system freezes when i test it (using X -config /root/xorg.conf.new) and if i just cp into /etc/X11/ GDM fails to load, and manually typing startX in command prompt i get "fatal error no screens detected".
Fedora Installation :: Lockup At First Boot Screen - Can't Move The Mouse And Keyboard Doesn't Work
Jun 11, 2009I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedDebian Configuration :: PS2 Mouse On Laptop Compaq Evo N610c, Squeeze - Doesn't Work?
Mar 2, 2011how to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies View RelatedDebian :: KDE Do Not React On Left Mouse Click After Boot
Apr 6, 2016I've successfully installed debian 8.3 KDE to my desktop fill it with different progs and quite smoothly use it for about one month.
Fixing some minor issues with google. But suddenly something get wrong
I do not remember that I done anything special but one day after logging to system I found that system do not fully process left mouse button.
Mouse pointer was moving OK, right mouse botton was able to envoke pop-up menu.
I was able to run programs from desktop icons by left-mouse button click .. but once program window was opened it does not react on left mouse button so for example i was not able to switch between browser tabs or close window clicking on it it top right cross As well KDE "start" button do open menu but that's all no reaction on left click.
First solution was ctrl-alt-del wait for 30 seconds .. re-login and voila ... that restores normal behavior until next reboot
after some reading I found more quick workaround ctrl-alt-F1 ..... ctrl-alt-F7 and OK system works again as expected no problem with mouse at all...
I've tried to create another user, tried to reinstall kde-window-manager (kwin) and kde-plasma-desktop (just marking it for reinstall in Synaptic) no effect.
After some time it become react on left mouse button even worse .. so even KDE start menu button stop open at all after click strange but really like it was some live slowly dying organism .
ctrl-alt-F1 ..... ctrl-alt-F7 is my only life saver at the moment but it is only workaround ....
Debian Configuration :: Keyboard And Mouse Not Reacting After Boot?
Jan 22, 2011A couple of weeks ago I installed a new 4-core Lenovo PC and installed Squeeze on it - keeping it updated every day. When kdm or gnome display the login screen, my USB-connected keyboard and mouse don't react. When I then unplug and re-attach them into the same socket everything ist fine. Surely this can't be working as intended? I can however get into BIOS-Setup as usual during the initial boot-phase by pressing Crtl-S and F1. Things also are fine when selecting the debian version to run from the multi-boot screen.
I am enclosing the kern.log of the last boot below (don't know how to attach files!). In that I can see that on line 530 ist says New USB device found, idVendor=046d, idProduct=c03e (address: 5; optical Logitech mouse) and then on line 542 New USB device found, idVendor=046d, idProduct=c31c (address: 6; keyboard).
It seems to get "interesting again on line 632 etc. with the message usb 2-1.8: USB disconnect, address 6.
-------------------------------------
2.754607] usb 2-1.5: new full speed USB device using ehci_hcd and address 4
2.855589] usb 2-1.5: New USB device found, idVendor=046d, idProduct=0a0c
2.855594] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.855598] usb 2-1.5: Product: Logitech USB Headset
[Code]....
Debian Multimedia :: Keyboard And Mouse With No Response After LXDE Boot
Feb 11, 2015I use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[ 17.206] (II) Module shadow: vendor="X.Org Foundation"
[ 17.206] compiled for 1.12.4, module version = 1.1.0
[ 17.206] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.206] (==) Depth 24 pixmap format is 32 bpp
[ 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 17.211] (==) FBDEV(0): Backing store disabled
[ 17.212] (==) FBDEV(0): DPMS enabled
[Code] ....
Slackware :: Mouse Acceleration - On Boot The Mouse Is Too Fast
Dec 13, 2010Iv'e got an issue with mouse speed, on boot the mouse is to fast, so I found that the command
Quote:
slows it down the way I need. But now, each boot I need to run it again. Is there a place where I can put it so it runs every time X starts? Also, googling a bit I found that udev rules can be used instead, but I don't know how to write it as a rule.
Debian :: Need To Record Mouse Location When There Is A Mouse Button Event
Sep 15, 2015CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20.
The only avalible resolution is 1600x900.
/etc/debian_version 8.1
GNOME Terminal 3.14.1
xnee 3.19
Debian Installation :: Boot DVD Don't Work - Jessie With Added Firmware
Jul 10, 2015I would like to upgrade from Win8.1 to Debian 8. This post might require some Wind expertise as well. I have to deal with the dreaded UEFI interface.
I got the iso with the added firmware from here: [URL] ....
The i386 download and it appears to be 334 MB. I pretty got it because I don't want to mess with the wireless controller (been there done that.)
As far as the Wind side goes I disabled secure boot. Just whenever I get to the fancy blue screen, I select boot from EFI DVD. Then it just says it can't load it and asks if I want to continue loading the OS. This might be useful I used the default Desktop Burning Gadget to burn the disk image.
Debian Installation :: Boot - Apt-get Install Xorg Doesn't Work
Mar 25, 2010I recently installed debian on my ibook G4, but when I start up the computer, it doesn't boot into Xorg. When I tried to start Xorg, it says that it is not installed. How would I install it, and how would I start it? When I do the apt-get install xorg, it doesn't work. Right now I'm running ubuntu on it, but I really want just plain debian, as I really dont need all of the bells and whistles that Ubuntu offers. I just need something to do schoolwork on (I'm a highschool sophmore), and I don't want to use OS X for that as I like linux better (specifically debian and ubuntu).
View 1 Replies View RelatedDebian Installation :: GRUB Multi-boot Config Does Not Work On Physical Machines
Mar 26, 2016I wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.
set imgdevpath="/dev/disk/by-label/multiboot"
Code: Select allmenuentry 'Debian Jessie amd64' {
set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
loopback loop $isofile
linux (loop)/install.amd/vmlinuz
initrd (loop)/install.amd/initrd.gz
}
This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.
Networking :: Network Doesn't Work If Cable Is Plugged In At Boot (Debian Lenny)?
Jan 19, 2010For about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies View RelatedDebian Hardware :: Mouse Tracking Error - Mouse Not Tracking Correctly
Jan 8, 2011I had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?
View 1 Replies View RelatedHardware :: Mouse Won't Work With X?
Apr 28, 2010I have slackware installed on two boxes and on neither of them am I able to get the mice to work. At first the screen would just stall and I"d have to reboot. Then I changed the keyboard driver setting from
Driver "kdb"
to
Driver "Keyboard"
[code]....
Ubuntu :: Mouse Won't Work In 11.04?
May 30, 2011i have tried to post this in several Ubuntu forums, but no answers so far.when i first started the Ubuntu 11.04, it said "..missing graphics..." something and that it would start in classic mode. Perfect, everything is fine, the mouse pointer doesn't move. not even with an external USB mouse.(i use a HP pavilion laptop)
View 8 Replies View RelatedUbuntu :: Wireless Mouse Won't Work 9.10 On PS3
Mar 15, 2010I just installed ubuntu on PS3 and my wireless mouse will not work, I have 2 sets of keyboard mouse combos and both the mouses wont work on the ps3 but will on the desktop. Is there a way I can get my mouse to work?? I have a usb mouse that works but Its a pain to use and I cant sit right away from the tv.
View 2 Replies View RelatedUbuntu :: Particular USB Mouse Does Not Work For Particular User?
Sep 6, 2010I'm having a pretty small problem, but a pretty weird one.I created an account on my desktop for my 4-year old. But my regular USB mouse was a bit large for his little hands. So, I grabbed the little mouse I use for my laptop for him to use.Problem is, the small USB mouse does not work in his account. It can move the pointer, but clicking has unpredictable results.The small USB mouse works fine in my account. My regular mouse worked fine in his account, just like it works for everyone else.His user account clearly does not have some privilege that is needed for the small mouse to work, but is not needed for the other mouse.
View 2 Replies View RelatedUbuntu :: Mouse Won't Work After Install
Mar 15, 2011I have recently upgraded to and then reinstalled Maverick (retaining the home directory). After the reinstall the mouse stopped working. It's not a hardware issue as the mouse works fine during the live CD installation. I have tried both a serial and a USB mouse. I have tried reinstalling a couple of times too.
I think I've had this issue before in a previous version but can't remember how I solved it.
I have been using Ubuntu for about 2 years now, and am by no means an expert. As a result I'm sure you will need more information but am unsure of what information that is or how to get it.
Ubuntu :: Mouse Touch Pad Does Not Work?
Jul 31, 2011my mouse touch pad dose not work it wont let me click anything if i touch it is there any way to solve this problem?
View 1 Replies View RelatedUbuntu :: New Mouse Won't Work On Jaunty?
Jun 7, 2009I just installed Ubuntu 9.04 on an old Compaq Deskpro with PS/2 ports for the mouse and keyboard. My original mouse is old and has no scroll wheel, so I purchased a new Logitech Optical Mouse with USB. I purchased a PS/2-to-USB converter so that I could plug it in to the PS/2 port. After booting up, the mouse does not work at all. While the computer is on, I can unplug the new mouse and plug in the old one, and the old one will work. But the old one is close to failing, and I need to get a new mouse to work.The configuration file /etc/X11/xorg.conf did not have a mouse configured, so I tried adding the following code to it:
Code: Section "InputDevice"
Identifier"Configured Mouse"
Driver"mouse"
[code]...
Hardware :: Can't Get Serial Mouse To Work?
May 2, 2010I tried my COM mouse KM-203S on Windows, it works out of the box. Now i want to make it work on linux. But the problem is that mdetect doesn't recognize it, and whatever protocol i select in inputattach, the cursor jumps unpredictably when i move the mouse. How can i get the parameters for this mouse - maybe baudrate, etc.? Or maybe i'm doing something totally wrong?Here's mdetect output (i moved the mouse while mdetect was working) on 300 8N1 mode (set by minicom):
Code:
Found the following devices:
/dev/ttyS1
[code]...
Hardware :: Slack 12.2 PS/2 Mouse Won't Work?
Jul 20, 2009I've just come from version 12 to 12.2 and I'm suddenly having issues with a basic PS/2 mouse. I've been searching for over two hours and I've made multiple adjustments to xorg.conf with no luck. Apparently, I'm more of a newbie than I thought.Would someone be so kind as to give me a hand?
View 4 Replies View RelatedCentOS 5 :: Keyboard And Mouse Won't Work In GUI?
Apr 1, 2010I've just installed CentOS-5.4 on an AMD64 box, dual boot with Windows 7 64, if that matters. At first I could not get the GUI to display at all, but fixed that using system-config-display. During installation, the keyboard (HP bluetooth set with mouse) worked fine in the GUI, but mouse did not. Now when it loads the GUI interface after booting, neither the keyboard or the mouse will work at all, therefore I can't navigate anywhere. I have done the yum update already as well, from init 3, but they still are not working. what I should do next, where to check?
View 5 Replies View RelatedFedora :: 4th & 5th Mouse Button Doesn't Work
Oct 10, 2009I have a 5 button mouse and the 4th and 5th buttons are useful for skipping back or forwards while surfing with Firefox. It would be nice if I could skip back in Nautilus too, but it doesn't work. (Alt+LeftArrow & Alt+RightArrow as keybord equivalent) Is there a possibility to use this buttons in Nautilus too?
View 6 Replies View RelatedFedora Hardware :: Keyboard / Mouse Does Not Work
Dec 22, 2009Picked up a Linkskey KVM (LKU-UA02) from my brother for free, thought I'd put it to use. Works fine but after switching between each machine once, the keyboard/mouse does not work. Tried unplugging the device(s) and the KVM itself from each machine but no luck.Not a huge issue, but it would be nice to use the KVM (right now I have to use VNC to get a similar effect).
View 1 Replies View RelatedOpenSUSE Hardware :: Mouse Doesn't Work - Use Through A Hub?
Apr 22, 2010i have a regular ole USB mouse and got a USB hub to expand the number of ports i have. I connected my USB mouse to the hub which worked in Windows but when i booted up linux the mouse did not work. If i plug the mouse in directly then it works again but i would like to figure out how to make the mouse work using a hub but am not quite sure where to start,
View 6 Replies View RelatedUbuntu :: Mouse Press On Touchpad Does Not Work Sometimes?
Jan 30, 2010My hardware is a Gateway LT2104u netbook.Bought it today, took it out the box and installed the netbook version of Ubuntu.Now here is the problem.The touchpad works fine. I am able to move the mouse all over the screen, the keyboard works find too. The problem is with the mouse click. The clicks are recognized when I am in the 'overview screen'. For example I can click on firefox and it opens. However once firefox is open it does not respond to any clicks. Even clicks to close firefox.
I push Alt+f4 to close the program and then I can click into any other (or the original) programs, but once inside the problem replicates.The problem was present in the 'live cd' during install as well.Does anybody know what might cause this? The whole netbook is useless at this point since I need to click to pretty much do anything in most applications (the Terminal program is one of the few exceptions )