Ubuntu :: Mouse Press On Touchpad Does Not Work Sometimes?
Jan 30, 2010
My hardware is a Gateway LT2104u netbook.Bought it today, took it out the box and installed the netbook version of Ubuntu.Now here is the problem.The touchpad works fine. I am able to move the mouse all over the screen, the keyboard works find too. The problem is with the mouse click. The clicks are recognized when I am in the 'overview screen'. For example I can click on firefox and it opens. However once firefox is open it does not respond to any clicks. Even clicks to close firefox.
I push Alt+f4 to close the program and then I can click into any other (or the original) programs, but once inside the problem replicates.The problem was present in the 'live cd' during install as well.Does anybody know what might cause this? The whole netbook is useless at this point since I need to click to pretty much do anything in most applications (the Terminal program is one of the few exceptions )
I've one lenovo 3000 g430 4152 laptop on which i have windows but previously installed debian 5.03 and for enabling the wireless i've to download broadcom b43legacy and install it by compiling because the backports kernel doesn't work with lenovo and after installing debian accidently switched of the wireless by the slide button on laptop
but on next boot i was not able to enable the wireless either by the slide button or fn+f5 which is the key for enabling it the wireless then on some forum i got advise that i can only re-enable by installing windows because lenovo drivers are available for only windows for this model... my question is that is there any solution for it in debian and also there is one more problem that i've to press fn+f8 twice on each boot for enabling the touchpad...
1) check if a mouse button is pressed down. I need to check this status of mouse button again and again inside a loop. Depending on the status, some function will be called. OR
2) check if some key of the keyboard is pressed down. I need to check this status of 'key' again and again inside a loop. Depending on the status, some function will be called.
openSuse 11.4 64bit fresh install, KDE 4.6.0. Now I am probably being obtuse, but If I click on the wonderfully named "My Computer" I get, among other things, a display of Disk Information; hard drive partitions and any DVDs or CDs. If I let my mouse cursor alight on any of these, I get a message "Press the right mouse button for more options (such as Mount or Eject)" But if I press the right mouse button, I don't get those options; I get a message "Open in new window, Open in new tab, Open with ..., Create file project with K3b, and Compress ...".
I have a big problem with my openSUSE 11.2 32bit (but I have experimented the same error with other distributions), this problem consist in a temporarily freeze of my system after some seconds or some minutes if I don't move the mouse or I don't press any key... but when I move the mouse or press any key the system magically wake up and each applications begins to run from the point where was interrupted... this problem also affect on the system clock that loses every second that the system remain frozenMy computer is a notebook with: CPU Intel Core2 Duo T81004GB RAMGPU GeForce 8600M GT
I bought an Acer Aspire One Netbook and installed Ubuntu Netbook Remix, but the Touchpad tab in the mouse settings is missing. How do I enable it? I am using Ubuntu 10.04 (Lucid).
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
when I put more than one finger on my touchpad, the mouse starts going all over the screen. There is a video on what it does: [URL] I have Gateway NV53 with 32 bit OS Wubi install 4GB Ram AMD Athlon II X2 M300 CPU (dual core) Multi-Touch Touchpad
Debian seems to recognize me touchpad as PS/2 Generic Mouse so tapping works but I don't have touchpad in system preferences and two fingers scrolling doesn't work as well as two fingers zoom. Notebook is Samsung 530u3c. I give you some info about my system down below.
I'm running Debian Squeeze on an HP Pavilion dv6-6040ca. The touchpad featured is relatively new, which is likely the root of my problem. The touchpad with its winblows driver features a backlight, two mouse buttons (buttons,not dedicated touchpad space), and an 'on/off' switch/zone in the top left of the touchpad. The touchpad zone works well for pointing, but no gesture support. The touchpad's tap/click feature works way too well, which is very frustrating. The touchpad is detected as a mouse, so there is no option in System->Preferences->Mouse for a touchpad. Both mouse buttons function as expected. The 'on/off' switch/zone does not function, nor does the backlight.
The only feature I really need is the ability to turn off the tap/click feature, as it makes typing a nightmare. It's gotten to the point where I wrote a shell script to toggle the loading/unloading of my psmouse module (which isn't a bad solution, but I don't want my general account having access to modprobe).
I'm using the proprietary ATI driver (couldn't do 3D with the open driver), and I'm using a proprietary wireless module for my RaLink wireless adapter.
Passing parameters to the psmouse module Unloading the psmouse module Trusting HAL entirely (no xorg)
[code]....
also the xorg input synaptics driver is installed. Now here's the fun part where the obvious things I've overlooked are quickly pointed out to me.
I've been looking everywhere to find out how to configure my touchpad so I can enable two-finger scrolling and disable-while-typing. I have a fresh installation of Debian Squeeze (I did NOT upgrade from a previous version of Debian, as that seems to cause this problem with some Ubuntu installations). I have the xserver-xorg-input-synaptics driver installed (already reinstalled it to no avail) and the gsynaptics package, which was supposed to add the tab in the mouse preferences but did not (as suggested here: I have a Samsung RF510-S01US if there is something about the touchpad this computer has that is not supported or something. (I know for a fact that this touchpad can handle multi-touch inputs, as it works under Windows 7)
this issue has been bugging me for years. I want the same capability in Fedora that exists in most recent versions of Windows -- disable the touchpad on my laptop if an external mouse is plugged in. Note that my how-to is a little hardware-specific regarding the actual disabling of the touchpad; I'll discuss that more at the end of the guide.
So, here goes: For my OS (Fedora 13 x86_64) and hardware (Dell Precision M4500) - I needed a specific utility and three scripts. This Dell's trackpad and nipple-stick are seen as an 'internal' PS/2 mouse by Fedora, so I had to install 'xinput' to disable it.
I've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
I was trying to tweak my video card's performance by configuring the xorg.conf file. There were many lines unrelated to the card there; so, to make the file cleaner, I decided to delete all the sections except the one I was dealing with. Obviously I shouldn't have done that. After rebooting the system, all the hardware that provided human interface stopped working. Now I have to find a way to delete that xorg.conf file. The computer is still connecting to the internet, and I have another computer running Debian available. Is there a way to access the broken computer with the other one?
I have a small issue I couldn't find a solution for. I'm running Centos 5.5 on a Fujitsu-Siemens S6120 laptop. When I boot my system and use the touchpad for the first couple of seconds my mouse cursor jumps around the screen sporadically and also mouse buttons "gets pressed" by themselves (without me actually touching them). After 1-2 seconds the situation becomes absolutely normal - mouse moves good and buttons work only when I press them. Everything repeats after the reboot.
I see the following error in the system log: psmouse.c: Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away
It appears right when I try to use the touchpad for the first time, I guess.
The situation isn't critical, but is quite annoying. Is there a way to get it fixed? I searched the Net, but found mostly issues with mouse loosing sync during operation - such thing never happened to me, as my issue appears only once per boot.
i cant get this right for some reason. i switched from ubuntu to fedora. in ubuntu i had the same issue with the touchpad, but there i found a fix which worked with ubuntu, but not with fedora.[URL]... the problem in fedora is that i dont have any psmouse.ko module in /lib/modules/2.6.39.4/kernel/drivers/input/mouse so the patch cant really be applied so i get an error, saying there is no psmouse
i found a fix, but since my knowledge with linux is limited i didnt get it right. "I spent some time trying to get this working (and one will find other threads here, on the Fedora list, etc, where I was trying to get help), but the problem, in the end, is that Fedora doesn't install the PS/2 mouse driver as a module, but builds it into the kernel. So the solution was to recompile the kernel using the changed files from System 76's repo.
This is not nearly as difficult as it sounds. The process described in the Fedora docs, under Building a Custom Kernel, is easy enough to follow. In my case, it was even easier. I unpacked the kernel source by following the steps down through "Prepare the Kernel Source Tree" and then copied the source for the new "module" into drivers/input/mouse, replacing just the elantech.h and elantech.c files. I don't really care about getting an RPM, so I just built the kernel"[URL]..
whenever I start my laptop with Ubuntu Installed the startup screen goes strange (fuzzy/block type) then is fine when the desktop appears, but I can't use the touchpad or the keyboard.
Is there a repair option or does anyone know what has happened ?
I just put ubuntu 10.10 on my HP Pavilion dv9000, and it's been working well for the past few days, but just recently the touch pad stopped working, even when it's on. My usb connected mouse works. What should I do?! I need this resolved now.
Laptop is of the Lenovo 3000 Y500 series, 32bit processor. Touchpad does not respond during the installation.Worried if the Touchpad won't work even after the installation..Currently using Windows7.
my touchpad worked out of the Box after insalling Xubunut 11.04 and did so ever since. But since yesterday it doesn't. It worked when i shut down the laptop and didn't when i booted later. How do i fix this? Yes i read the article about thouchpads.
My touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
I always edit /etc/default/grub to fix my touchpad issue and make it work on Ubuntu based distros. Recently I have installed Fedora15 and I tried to do the same work on it but I couldn't find the file. Do you know where is it in Fedora?
I have a lenovoY-410 laptop ,on which i tried to install Fedora11 , however my laptop's touchpad does not work for Fedora11 , however it worked well for Fedora10
This weekend I did a distribution upgrade to Karmic, but it didn't go very well. Upon reboot, I see a white ubuntu logo on a black screen. I hear the speakers pop, and the screen flashes several times, sorta like the blank screen is maybe changing video modes. After a while I see what I think is garbled text but is unreadable, and it looks like I can log on even though I can't read anything. Now, booting into recovery mode gets me to a readable prompt. There are no upgrades to apply. Typing gdm from here gets me to the desktop just fine. Also when booting, if I choose an earlier kernel the system boots fine also, except the touchpad doesn't work.
