Debian Hardware :: Touchpad Turned Off - Cannot Revive
Nov 28, 2015
My touchpad stopped working, most likely I have accidentally turned it off by some Fn-key combination (Fn-F4 on my laptop). Since then I was unable to turn it back again. What I've tried:
0. Same keycombo does not work. Actually, when checking with xev, Fn-F4 does not even toogle any KeymapNotify event. Some other Fn-combos result in KeymapNotify (e.g. screen brightness), some others (e.g. keyboard backlight) do not give event, but still do what they should do, and finally some do not do anything
1. Total power-off, also removing battery. This has usually solved touchpad problems on my other Fujitsu laptop, but not on this.
2. Checked xinput: it says, that touchpad is enabled
3. Also tried this trick: adding "options psmouse proto=imps" to appropriate config file. [URL] ....
4. Further playaround with psmouse, as described here:[URL] ....
Laptop type: Fujitsu S935
uname -r: 4.2.0-1-amd64
I'm using MATE 1.10.2
View 6 Replies
ADVERTISEMENT
Feb 16, 2010
This is the difference in the output of a port scan using Zenmap on the same system with UFW turned off and then with it turned on. It is obvious that UFW works.
View 6 Replies
View Related
Feb 2, 2010
The wireless connection works fine. The wireless switch automatically turns itself on every time I start the computer. However, after turning it off, I can't ever turn it on again unless I restart the computer. And because of this, the wireless connection is disabled until the next time I start the computer.I don't think this is a hardware problem because the switch can be turned on and off, although not in the way I expect.
I'm using ubuntu 9.10 on an Acer Aspire 4740G. The command [lspci | grep Network] shows Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01). the [rfkill list] command shows (when the switch is on)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
and, as expected, shows (when the switch is turned off)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
I just want to be able to turn the switch on or off at any time I want as long as the computer is still on.
View 2 Replies
View Related
Jan 9, 2011
I've been trying to revive an old HP Omnibook XE-3 using Ubuntu. After some installation problems, I've finally managed to complete the command line installation on the system. I then proceeded to update the system and install X.org.
This is where my problem lies:
Everytime I try to use
Code:
To get it running, it fails, no matter what the installed window manager/GUI is. XFCE and LXDE both fail, and even simple WMs like fluxbox fail. Even X.org on its own fails; All of them give me a black screen with which I cannot interact in any way.
Any ideas on what might be causing this? I'll be severely disappointed if it's a hardware issue, since I really want to get that old machine back on its feet. I should mention that I've been experimenting using a virtual machine set up in almost the same manner as the XE-3, and that one runs XFCE (the heaviest one I could possibly use on a less than 256 MB RAM machine) absolutely fine.
View 8 Replies
View Related
Jul 19, 2010
I'm trying to "repair" two Debian Lenny servers a friend of mine had installed and working fine, all of a sudden he calls and tells me the servers don't boot. He's getting this error messege on both, weird:
/bin/sh: can't access tty; job control turned off (initramfs)
View 1 Replies
View Related
Nov 24, 2010
I really have no idea why this happened, but when I logged in GNOME the appearance is different. At first it looked like this:
[URL]
and now it turns into this:
[URL]
Notice how it's more square. System->Preferences->Appearances doesn't seem to help.
View 10 Replies
View Related
Oct 30, 2014
i have a probelm once i leave my laptop there for a while the monitor turned off and there is no way for me to turn it back on, so i need to restart the machine.
View 3 Replies
View Related
Apr 2, 2015
Fairly new to debian and linux and general. I have an install of debian wheezy (to run LinuxCNC). I went in the graphical interface to the 'monitor' section and changed the screen resolution. I had two monitors, one labeled monitor and another (I think) Lenovo Monitor.
There was a check box in the screen monitor window that said something like, "Don't use this display." I figured it might turn off the lenovo and default to the generic monitor listed. I clicked it and my monitor turned OFF!! I tried another monitor (Dell in this case) and same thing, no video output.
I asked on the LinuxCNC forum and googled, but I just dont' seem to be able to figure out what or how to get to the solution.
I have been able to Ctrl-Alt-F1 to open a terminal. But, I can't find any the right files and found that the xrandr command 'should' work, but doesn't.
Whenever I issued the xrandr command (other than man xrandr), I get "Can't Open Display"
I did find two outputs VGA1 and LVDS1 in this file /var/log/Xorg.0.log and this coincides with what I saw in the monitor window. These are the 'output' types and if the xrandr command worked I'd issue something like : xrandr --ouptut LVDS1 --auto
I read about xorg.conf, but I could not find any xorg.conf files in the etc/X11 folder. In some of the info I found, the xorg.conf was replaced in this or a recent version of Debian by something else and confuses me.
One person had a similar issue and he got to this directory: $HOME/.e/e/config/standard" and found files such as:
"e_randr.cfg" plus "e_randr.1.cfg" thru "e_randr.9.cfg"
But, I can't get to that folder. How to turn on my monitor display?
View 3 Replies
View Related
Jun 18, 2011
Debian, Squeeze, Gnome. Laptop AJP7521P. I had it on for a few daysThen i decided to close the lid (hibernate). When i turned it back on, it did not load. It has a black screen with GRUB written on the top left. I think that grub does not load.My /(root) partition is sda4.Would update grub fix it? (I am worried whether it will find sda4).
View 10 Replies
View Related
Aug 2, 2010
due to low disk space there arose a problem. Now I re-installed Debian along with winXP as dual boot. XP works as it was before. but i can't open Linux. When i select Debian on boot-select page, Debian starts but stuck at a point as shown below:
check root= boot arg cat/proc/cmd line
or missing modules,devices:cat/proc/modules ls/dev
ALERT!/dev/sda3/doesnot exist. Dropping to shell;
Busy Box v1.1.3(Debian 1:1.1.3-4) built-in shell(ash)
Enter 'Help' for a list of built-in commands.
/bin/sh: Can�t access tty; job control turned off.
(intramfs)
i hv searched a lot but couldn't come up with a correct solution.i tried editing the grub by pressing 'e' when grub is displayed and added the line acpi=off irqpoll and then start booting. but the result was same.
View 2 Replies
View Related
Mar 26, 2010
On my laptop, I have stable installed. The original install was about two years ago, and I've just been keeping up with all of the stable updates. It is now an up to date Lenny. Over the months and years I have added several new icon themes to Gnome. I have noticed over time that several of the icon themes' icons have turned up missing. To see what I'm talking about take a look at the screen shots here: [URL]
Screenshot-2 is a closeup.
As you can see, icon themes Amaranth, Crux and Dropline Etiquette are missing their respective theme icons. The icon themes work, when selected, but the icon theme icon in the "Customize Theme" window never appears. Several of the other icon themes are the same. I have tried uninstalling and reinstalling the icon theme packs, but that doesn't fix it. I also have a desktop system of Debian stable with some of the same icon themes as on the laptop, but it does not have this problem. However, it is a much newer installation.
View 4 Replies
View Related
May 7, 2010
I am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.
View 2 Replies
View Related
Apr 22, 2010
I have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.
View 1 Replies
View Related
Jun 4, 2015
Although I'm a linux user, I don't know much about the whole booting process myself. I normally have a friend that I can consult when things don't go the way I expected. But here's the thing: he updated my computer and went away. And of course I can't reach him and I really need it to work. And moreover, I want to be able to sole things myself.
The booting process stops halfway. The last thing it says is: can't access tty: job control turned off (initramfs) ...
View 14 Replies
View Related
Aug 27, 2010
I couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place
I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.
Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.
The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons
I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5
I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices
Which gives:
Code:
View 5 Replies
View Related
Jan 2, 2011
I have posted questions on several Linux forums that asked how I could turn off the touchpad on my new EEE-900A netbook. There is a backstory that is not that relevant, but in a nutshell, I got this tiny low-power computer to be my voice since my speech is impaired. Only the latest Debian has the tools I needed.
After much searching, suggested that I remove the touchpad driver; the command as root: # rmmod psmouse
Did the trick. On the 900A, the protocol that handles the touchpad is the PS/2. Removing the psmouse driver module does not affect my USB mouse, so now I can use my USB mouse and type away with my left hand and bumping into the touchpad doesn't screw things up. In other words: Success. (I am being as explicit as possible so that all search engines will find this.
View 1 Replies
View Related
Jan 24, 2011
I running acer aspire 5742 64bits intel core i3 is there a way to disable the touchpad cause is bugging me.
View 13 Replies
View Related
Jun 14, 2010
My touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
View 1 Replies
View Related
Aug 22, 2015
Ive installed debian 8 with a usb stick , without internet connection.
My touch pad configuration is quite strange : i cannot right-click and also i cannot select text (which normaly is done by pressing leftclick and moving the other finger). can
Instead i can right-click by tapping with 2 fingers at once , but still the problem of selecting text bugs me.
Ive google-d alot but there seems to be no GUI for solving my problem or none that i know how to install.
EDIT : ive googled a little more and i found how to do it , just Press with 1 finger and dont up it until youve selected the text , however that doesent let me select large pages, like 2 pages size because i cannot scroll enough
View 12 Replies
View Related
Nov 27, 2010
Since last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
View 6 Replies
View Related
Apr 5, 2011
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
View 1 Replies
View Related
Nov 7, 2015
Im totally new on linux, I installed Debian 8, but I dont know how to make my touchpad to work properly. I have ASUS X555LN with focaltech touchpad, its working but just draging mouse and pressing touchpad, no scroll with two fingers and no touch to select. On windows was working everything fine with asus smart gesture but this is diferent world
View 3 Replies
View Related
May 29, 2010
I have installed Debian Testing, which didn't crashed...yet. But I have another problem. I am on a ASUS Laptop, with Elantech touchpad, which doesn't work. The bigger program is that the FN key from my laptop is not recognized too. I am a bit angry because it was working, it is working on live CDs, was working on yesterday's Debian, same version, same CD, nothing changed. I've followed these methods, but no success: [URL]
View 1 Replies
View Related
Nov 6, 2010
I am very eager to get two-finger scrolling in my acer 5740, but the big issue is my touchpad is not fully functional
"xinput llist" already detects the touchpad as
SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
The xorg log shows dual loading of touchpad driver
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[Code]...
But still after completely removing the xorg log and restarting the X, the log reports as
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
"synclient -l" though shows a long list of already set values, the touchpad is not working properly. How can I prevent this dual loading of drivers ? Kindly enlighten me , so that I can have a properly working touchpad. If any more info is required, then please ask me. There is no xorg.conf. I tried to generate one by "Xorg :1 -configure", but the generated file did not have any section related to touchpad.
View 2 Replies
View Related
Apr 16, 2011
I am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
View 2 Replies
View Related
Mar 21, 2011
Installed Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 Replies
View Related
Nov 2, 2010
I am trying to make it work in a fresh Squeeze install. After installation, only the left mouse works. It seems mouse driver and not synaptics is loaded. I checked the package manager and saw xserver-xorg-input-synaptics packaged installed.
How do I load the synaptics driver and how do I verify I have it? I would like to make sure that before playing with the options.
View 14 Replies
View Related
May 14, 2010
Install Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies
View Related
Apr 4, 2010
"/bin/sh: can't access tty : job control turned off(initramfs)"This comes when I boot.Hi, I tried to netinstall Debian testing on my brother's computer and only selected the "Standard system". I think it installed Grub 2.The Grub boot menu is also not showing the Windows 7.Also, I have this new terminal as (initramfs) and do not know what to do. I am stuck with (initramfs) which I have no clue about.
View 7 Replies
View Related
May 1, 2010
I have an EeePC 1000HA with Debian squeeze, and I can't seem to find the option to enable touchpad tapping. Is there a certain config file for the synaptics-touchpad driver I need to edit?
View 6 Replies
View Related
