Debian :: Laptop Touchpad Isn't Giving A Click When Tap It
Mar 21, 2011Installed Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 RepliesInstalled Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 RepliesSo I'm trying to change the primary click on my touch-pad to left-handed with xmodmap -e "pointer = 3 2 1". it changed successfully, but there is one functionality I'd like changed. The touch pad itself changes to secondary too, but I want it to remain as primary.
View 0 Replies View RelatedI'm newish to the forum, but have been using ubuntu for the past few months.I recently upgraded from eeebuntu (a 9.04 derivative) to 10.04, and found that two finger tapping my touchpad has gone from middle click to right click, (and 3 fingers is now middle instead of right).
From what I've seen, this has been changed since 9.10, but I haven't been able to find a permanent solution yet. Most fixes have been from before and use hal, or other things that don't exist anymore. The one thing I've found does work is using xinput and the command
Code:
xinput set-prop "ETPS/2 Elantech Touchpad" "Synaptics Tap Action" 2, 3, 0, 0, 1, 2, 3
But that has to be run every time I start up, and it occasionally reverts while I'm using the computer. I've tried making a script that runs at startup, but neither adding it to the list of startup programs, or autostart folder has worked, but running the script file manually does work. I'm a bit at wits end with this, it's the only issue I've had with 10.04, and I've spent many many hours trying to get it to work (I've also tried gsynaptics and the newer version whose name escapes me right now). Hopefully there's a permanent fix out there.
I am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
Install Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies View RelatedI have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
on my netbook I have a Debian unstable/sid system. A few days ago I did an apt-get (dist-)upgrade which I think also updated the X-Server. Since then my netbooks keyboard and touchpad are not working as soon as the desktop is started (I think gdm).
The Keyboard works during the Grub selection and also in recovery mode (Root Terminal), so I'm sure its not a hardware problem. Could it be that the X-Server unloads the kernel modules for those two devices?Also if I plug in a USB keyboard or mouce they are working.
I have tried to use the extensions toggle-touchpad and touchpad-indicator that claim to be able to do this, but neither will load properly. They show up with a little exclamation-point-triangle in the "Tweaks" panel saying "Error loading extension". How to get Jessie gnome system succeeded in getting their touchpad disabled via a simpe toggle mechanism?
View 5 Replies View RelatedI just installed Debian on my new VAIO VPCS13. It seems to be working for the most part, except it does not recognize my Synaptics touchpad at all.
I've had Ubuntu installed on this computer before and the mousepad worked fine. This being Debian on a new-generation computer, it makes me think that Debian just probably hasn't released the update yet.
I use middle click much more than right with my Asus EEEpc 900, so I prefer to use it with two fingered tap. Default configurations for multiple finger taps are 2 = right and 3 = middle. I got this reversed with this guide ("Make middleclicking work in Firefox again...":[URL] but after an update it doesn't work anymore. I tried to install the .deb again, but Ubuntu tells me that the system already has a newer version of it.
P.S. If only we'd get this configured straight from the GUI of mouse settings like the scrolling options...
I finally got 10.04 installed and I am loving it so far! Very quick! But I do have some nuance 'problems'. Here is one for I can not find a solution. In previous versions of Ubuntu, I was able to click on my touchpad with two fingers that replicated a right-left click to open a link in a new tab. Now it raises a popup menu in the browser asking how to open the link.
I have tried this in Chrome, Opera and Firefox and have the same issue in all browsers, which leads me to believe this may be a Gnome setting. How do I change this behaviour? There was nothing in the mouse preferences to change this.
I have version 10.10 installed on my netbook, my mouse's right click does not work, I tried to play with the options in the systems > mouse but there's no option to enable disable the right click,
View 2 Replies View RelatedExcuse the horrid formatting, this was copy/pasted from the #ubuntu IRC and to be extremely honest I can't be bothered to remove every space. I have a Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing,
and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window.My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Afterword: I installed two scripts from [URL]. They didn't do anything I couldn't already do, and they did not make it possible for me to right click.
So my Natty install is finally starting to come together, internet works, I'm getting used to the new Unity interface, and well everything seems under control. Now there are just a few issues remaining. The most annoying for now is that there is no tap-to-click on my netbook's touchpad (and in the list of features I think they mentioned several other interesting new things with the touchpad).The other thing is that I can't open Synaptic from the menu/application list. It works from the terminal, though,
View 7 Replies View RelatedI'm on a new netbook using Ubuntu 9.10 and I cannot figure out how to disable tap-to-click on my touchpad. I figured it would be simple enough to use SHMConfig, however; every post I've seen says they have something similar to this in xorg.conf
Code: Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection Instead, I have this ...
Code: Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
End Section
I have tried simply changing the driver entry to "synaptics," however when I run SHMconfig it says the driver hasn't been loaded.
Just installed Slackware 13.1 and I'm trying to disable tap to click on my touchpad. When I run "synclient MaxTapTime=0" it turns off. But the next time I restart X, the settings won't hold. I tried putting Option "MaxTapTime" "0" in xorg.conf, but it didn't work. This is my mouse portion from xorg.conf generated from the nvidia driver from slackbuilds.
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
[Code]...
How to enable tap to click for touchpad on my laptop in Fedora 13 KDE. The old trick with copying 10-synaptics.fdi to /etc/hal/fdi/policy does not work any more since there is no 10-synaptics.fdi file on the system.
View 2 Replies View RelatedIs it possible to get the touchpad on a MacbookPro-6,2 to do a right click some how. Feel crippled without it.
View 1 Replies View RelatedSo I installed ubuntu 11.04 and in 10.10 there was a fix for the right click not working but it didn't work in here.It says that the package wasn't able to install and i have to go to synaptics package manager and mark it for uninstall because The software center only says reinstall
View 3 Replies View RelatedI am loving my Ubuntu machine, but there's a slight annoyance that I can't seem to disable. Is there anyway to disable the tap-click on the touchpad of a laptop while on the login screen? I do not want to disable the click from the button, but rather when you gently tap it with your finger. The options for it in the Control Center doesn't seem to disable it during the login screen.
View 1 Replies View RelatedAfter compiling the 2.6.36.2 kernel and re-installing the Nvidia proprietary drivers, my touchpad has started to act strange; the cursor seems to glide a lot faster, yet more erratic and when I try to hover over an icon the cursor wont stay still, furthermore I lost the ability to 'click' on anything using just touchpad.
I have checked dmesg and Xorg.log for any clues, as well as removed everything with the exception of the card and device section from my xorg.conf. The issue has nothing to do with compiling the new kernel, as it was working perfect until I installed the Nvidia driver.
I have acer aspire one netbook with synatics ps2 touchpad. It works fine, but I'd like to emulate left button by just pressing somewhere in the touch area (same as it works in windows or ubunntu). I think this is called tapping. How can I configure that? I have been in touchpad settings and management, but I have not found any checkbox helpful. In OS 11.3 I need to press left button next to the touchpad.
View 2 Replies View RelatedI work on a laptop and typically have a USB mouse plugged in. Each time I start an X session, I switch my mouse buttons with an: Quote:
xmodmap -e "pointer = 3 2 1"
If I decide to unplug the mouse and work with the touchpad, I must always reverse the options again to pointer = 1 2 3, or else, while the right and the left button still work as a left-handed mouse, tapping, instead of acting like a left-click, gives a right-click menu. My touchpad is listed as:
'ImPS/2 Synaptics TouchPad'
using the evdev driver.
I admit that I haven't played much with alternate xmodmap configurations, but I'd like to sort this out. It's even more confusing since I don't have a xorg.conf and, if I manually add one, despite having tried repeatedly, I can't make X-server to read it.
The relevant part of lshal output: Quote:
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'ImPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
[Code]......
One strange and little annoying issue I notice with my openSUSE 11.3 installation is my Synaptic touchpad behaves way too strange.... Dragging a window or icon - half way around - a click is generated (probably a middle click I guess) and I need to re-drag it again.... In the browser when I try to select a text - again by dragging - a middle click gets generated... The same happens when I use gvim in visual mode too - I end up pasting the code I had selected halfway because of the middle click....
Middle click can be generated only if I press both left and right click buttons - which I'm pretty sure I'm not.... I tried playing around with the touchpad settings but no good.... I'm not able to find anything related to the middle click on the settings application... My touchpad works fine in Ubuntu and was in 11.2 as well.... Yes it works fine in Xp too.
I just put ubuntu 10.10 on my HP Pavilion dv9000, and it's been working well for the past few days, but just recently the touch pad stopped working, even when it's on. My usb connected mouse works. What should I do?! I need this resolved now.
View 7 Replies View RelatedI have a lenovoY-410 laptop ,on which i tried to install Fedora11 , however my laptop's touchpad does not work for Fedora11 , however it worked well for Fedora10
View 6 Replies View RelatedCan anyone tell me how to turn off touchpad clicking in OpenSuSe 11.2?
In 11.1 it was done in the Xorg.conf file but 11.2 does not have this file.
Laptop is of the Lenovo 3000 Y500 series, 32bit processor. Touchpad does not respond during the installation.Worried if the Touchpad won't work even after the installation..Currently using Windows7.
View 2 Replies View RelatedI was going to render the video that i made last night, and then in the morning, My ubuntu 10.10 boot normally, but when in the Ubuntu plymouth(the ubuntu logo with 5 dots) showed,there are text told me like this Code:Keys: Press S to skip Mounting or M for manual Recoverysince that moment my keyboard and touchpad are not working, but ifi use an external keyboard and mouse it would working flawlessly, note that i don't have an external keyboard.i'm trying to boot into recovery mode, my keyboard is working very good, but i don't have any idea what is the problem.
View 9 Replies View RelatedI have installed gpointing-device-settings. It does exactly what I want it to do, disable the touchpad, until I reboot (not sure about logging out/in) and the touchpad is again enabled. So the vicious circle continues and I disable it for the session. Back in the days of xorg.conf it was easy enough to disable but of course that file, and the option to disable from within that file no longer exists for me. When I use Debian I can modprobe -r psmouse. That was a perfect solution as the touchpad was never heard from again with regard to that distribution. Attempting to remove that module under Fedora 15 results in the following.
Code: [glenn@f15beta ~>$ sudo modprobe -r psmouse FATAL: Module psmouse is builtin Is this something that I can change? I assume that built-in means that it's built in to the kernel? How about this angle. When I use gpointing-device-settings to toggle the touchpad on/off there must be one or more files that are altered. How easy would it be to find out exactly what files are altered and could I possibly set the immutable flag on this file so that it never gets toggled back to enabled again? There is a function key on this laptop, F9, that looks like it toggles the touchpad but it doesn't work under Fedora 15. Never tried it in any other releases.