I am trying to make it work in a fresh Squeeze install. After installation, only the left mouse works. It seems mouse driver and not synaptics is loaded. I checked the package manager and saw xserver-xorg-input-synaptics packaged installed.
How do I load the synaptics driver and how do I verify I have it? I would like to make sure that before playing with the options.
I'm using debian testing with cinnamon. After upgrading the kernel to version 3.17.2 (but I've also tried the 3.17.3 and 4) the synaptics touchpad died, as if it doesn't exist. I can't go back to the old kernel because the new one has solved a problem about freeze during the shutdown process, so I need it. Note that even with Mint 17, after upgrading the kernel, the touchpad stopped working in the same way.I believe that the touchpad is not seen , rather than loaded .xserver-xorg-input-synaptics and multitouch are installed.$ synclient
Code: Select allCouldn't find synaptics properties. No synaptics driver loaded?
$ xinput list
Code: Select all⎡ Virtual core pointer            id=2  [master pointer (3)]
⎜  ↳ Virtual core XTEST pointer         id=4  [slave pointer (2)]
⎜  ↳ SIGMACHIP USB Keyboard           id=11  [slave pointer (2)]
⎜  ↳ MLK Trust Mouse 15313           id=12  [slave pointer (2)]
[CODE]...
...no signs of life from the terminal, it immediately waits for the next command.
just installed debian squeeze KDE after years of ubuntu and suse.. For some reason, after I finally got both scrolling and tapping to work, I have a weird weird touchpad through my xorg.conf: - tapping on a tab in chrome closes the tab.
- tapping in a text field pastes txt that is in the clipboard, each successive click keeps pasting the same thing
- the left side of the touchpad is not enabled for vertical scrolling (?), and for some reason the directions are inverted (move finger up to scroll webpage down)
- when having multiple windows open, tapping that window will highlight it, but the previously selected window stays overtop of the now selected windows. Using the actual left click button the windows change normally.
A cat of /proc/bus/input/devices just shows the keyboard and pc speaker. I am running the 2.6.30.9 kernel on a RHEL 5.4 system. The stock kernel works fine. I have compared the kernel config files and do not see anything different in the INPUT Device area. Could it be that USB mouse driver is interfering? Is there something out side the INPUT Device section that the synaptic touchpad needs?
View 6 Replies View RelatedI read that synaptic touchpads should support multitouch and as I have one of those I tried to enable it. However I wasn't successful.
After some digging in config files (I had to enable SHMConfig) I ended up with KDE configuration tool which is really cool but all multitouch options are there disabled. And also there is an information which says that only one finger is detected by this touchpad.
Is something wrong or my touchpad just doesn't support multitouch? I got this laptop 1.5 years ago so it's not very old.
And by the way, I have this in my Xorg.0.log
Code:
[ 28.821] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 28.821] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 28.821] (EE) No input driver/identifier specified (ignoring)
[Code]....
I have an Acer Aspire 5740 with a synaptics touchpad. I have tried using the ksynaptics program as well as the touchpad settings under System Settings >> Computer Administration. My touchpad works, but it is driving me crazy with how sensitive the tap to click feature is. I want to disable it altogether so I can actually work on my computer. When I go to the touchpad section in System Settings >> Computer Administration >> Keyboard & Mouse, the tab says "Warning: Touchpad configuration is not supported on this system. The synaptics driver is either not loaded or too old. Refer to doumentation for information about the required driver version."
View 9 Replies View RelatedOne strange and little annoying issue I notice with my openSUSE 11.3 installation is my Synaptic touchpad behaves way too strange.... Dragging a window or icon - half way around - a click is generated (probably a middle click I guess) and I need to re-drag it again.... In the browser when I try to select a text - again by dragging - a middle click gets generated... The same happens when I use gvim in visual mode too - I end up pasting the code I had selected halfway because of the middle click....
Middle click can be generated only if I press both left and right click buttons - which I'm pretty sure I'm not.... I tried playing around with the touchpad settings but no good.... I'm not able to find anything related to the middle click on the settings application... My touchpad works fine in Ubuntu and was in 11.2 as well.... Yes it works fine in Xp too.
I have a Gigabyte M1022M netbook and I was tried to run OpenBSD, Debian Linux as well Archlinux on it with a X-Server.Everything worked great except the touchpad. It is an Elantech touchpad which should be supported by the Linux Kernel.After some time I tried to find something like a version or something else to clearly identify the touchpad but the touchpad was not listed in the output of "dmesg". There was also no entry in /proc/bus/input/devices.
View 2 Replies View RelatedI am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.
View 2 Replies View RelatedI have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.
View 1 Replies View RelatedI couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place
I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.
Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.
The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons
I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5
I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices
Which gives:
Code:
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
I have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
I just installed Debian lxde i686 and I do not see synaptic package manager?
View 2 Replies View RelatedI have posted questions on several Linux forums that asked how I could turn off the touchpad on my new EEE-900A netbook. There is a backstory that is not that relevant, but in a nutshell, I got this tiny low-power computer to be my voice since my speech is impaired. Only the latest Debian has the tools I needed.
After much searching, suggested that I remove the touchpad driver; the command as root: # rmmod psmouse
Did the trick. On the 900A, the protocol that handles the touchpad is the PS/2. Removing the psmouse driver module does not affect my USB mouse, so now I can use my USB mouse and type away with my left hand and bumping into the touchpad doesn't screw things up. In other words: Success. (I am being as explicit as possible so that all search engines will find this.
I running acer aspire 5742 64bits intel core i3 is there a way to disable the touchpad cause is bugging me.
View 13 Replies View RelatedMy touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
Ive installed debian 8 with a usb stick , without internet connection.
My touch pad configuration is quite strange : i cannot right-click and also i cannot select text (which normaly is done by pressing leftclick and moving the other finger). can
Instead i can right-click by tapping with 2 fingers at once , but still the problem of selecting text bugs me.
Ive google-d alot but there seems to be no GUI for solving my problem or none that i know how to install.
EDIT : ive googled a little more and i found how to do it , just Press with 1 finger and dont up it until youve selected the text , however that doesent let me select large pages, like 2 pages size because i cannot scroll enough
Since last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
View 1 Replies View RelatedIm totally new on linux, I installed Debian 8, but I dont know how to make my touchpad to work properly. I have ASUS X555LN with focaltech touchpad, its working but just draging mouse and pressing touchpad, no scroll with two fingers and no touch to select. On windows was working everything fine with asus smart gesture but this is diferent world
View 3 Replies View RelatedMy touchpad stopped working, most likely I have accidentally turned it off by some Fn-key combination (Fn-F4 on my laptop). Since then I was unable to turn it back again. What I've tried:
0. Same keycombo does not work. Actually, when checking with xev, Fn-F4 does not even toogle any KeymapNotify event. Some other Fn-combos result in KeymapNotify (e.g. screen brightness), some others (e.g. keyboard backlight) do not give event, but still do what they should do, and finally some do not do anything
1. Total power-off, also removing battery. This has usually solved touchpad problems on my other Fujitsu laptop, but not on this.
2. Checked xinput: it says, that touchpad is enabled
3. Also tried this trick: adding "options psmouse proto=imps" to appropriate config file. [URL] ....
4. Further playaround with psmouse, as described here:[URL] ....
Laptop type: Fujitsu S935
uname -r: 4.2.0-1-amd64
I'm using MATE 1.10.2
I have installed Debian Testing, which didn't crashed...yet. But I have another problem. I am on a ASUS Laptop, with Elantech touchpad, which doesn't work. The bigger program is that the FN key from my laptop is not recognized too. I am a bit angry because it was working, it is working on live CDs, was working on yesterday's Debian, same version, same CD, nothing changed. I've followed these methods, but no success: [URL]
View 1 Replies View RelatedI am very eager to get two-finger scrolling in my acer 5740, but the big issue is my touchpad is not fully functional
"xinput llist" already detects the touchpad as
SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
The xorg log shows dual loading of touchpad driver
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[Code]...
But still after completely removing the xorg log and restarting the X, the log reports as
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
"synclient -l" though shows a long list of already set values, the touchpad is not working properly. How can I prevent this dual loading of drivers ? Kindly enlighten me , so that I can have a properly working touchpad. If any more info is required, then please ask me. There is no xorg.conf. I tried to generate one by "Xorg :1 -configure", but the generated file did not have any section related to touchpad.
I am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
Installed Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 Replies View RelatedInstall Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies View RelatedI have an EeePC 1000HA with Debian squeeze, and I can't seem to find the option to enable touchpad tapping. Is there a certain config file for the synaptics-touchpad driver I need to edit?
View 6 Replies View RelatedAfter upgrading my Acer extenza 5620z to debian squeeze(kernel 2.6.32-bpo.5-686) left click was not working on my SynPS/2 Synaptics TouchPad,allthought moving the cursor was working !
I went to debian channel on irc and there was someone who told that I should install a patch [URL] to correct this problem but when I restarted the whole touchpad was not working !!
Here is the output of dmesg [URL]
I have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
