Software :: Installing Banshee 1-1.7.3 From Source In Gentoo Amd64?
Aug 6, 2010
I am attempting to install Banshee 1-1.7.3 in Gentoo. So far I cannot find an ebuild (any links would be greatly appreciated) so I am attempting to install it from source. However I am getting stuck at the first hurdle; when I attempt the ./configure command all the dependencies check out OK, but I then get this error message at the end:
Quote:
./configure: line 12014: SHAMROCK_EXPAND_LIBDIR: command not found
./configure: line 12015: SHAMROCK_EXPAND_BINDIR: command not found
./configure: line 12016: SHAMROCK_EXPAND_DATADIR: command not found
[code]....
The reason that I am wanting this version of banshee is to use the Amazon MP3 plugin. Gentoo has an app for this in the portage repositories but it is hard masked for amd64.
View 2 Replies
ADVERTISEMENT
Sep 8, 2010
I sort of asked this question in the arch linux forums since I was interested in arch but I still have yet to get a response (maybe it's too early).I wan't something like gentoo but without taking up unnecessary space like gentoo's portage does (/usr/portage/). I find that to be a serious flaw with gentoo. Yes you can use squashfs-unionfs to help but it requires some work especially when something goes wrong with portage.I was thinking about arch but can you use it completely as a source based distro? Some people seem to have said it requires scripting and some work from the user. I wan't something that'll do it for me so I can set it and forget it.
I heard about source mage linux and exherbo but I'm not sure what to think. I'm thinking about trying arch linux and source mage but perhaps there's other distro's I don't know about. I'd really like some suggestions.
View 4 Replies
View Related
Aug 19, 2010
Yesterday I installed Debian "succesfully" (after some problems that were easily solved), but now I need some help with installing drivers and other stuff. I need to install the Conceptronic wireless card (rt61). I followed a guide I found on the Internet, but, when making the installation, Terminal gives me some errors.
make
make[1]: gets in the directory `/usr/src/linux-headers-2.6.32-5-amd64'
Building modules, stage 2.
MODPOST 0 modules
[code]....
Another thing I don't know if I installed correctly are the nVidia drivers. I think I installed them succesfully, because my graphics card is now quiet (when the drivers are not installed, it sounds like a nuke) and I have the nVidia settings installed, but... when I try to modify the resolution in Preferences/Monitor, I see "Unknown monitor" and "50hz refresh rate". My TV suports 75hz and when I installed Debian I had it at 75, but after installing the nVidia drivers, everything gone wrong.
I tried to update the xorg.conf with nVidia-settings, and now it says my monitor is at 75hz and it's a Phillips, but I still see Unknow monitor and 50Hz at Preferences/Monitor. Why does this happens? Also, my integrated sound card doesn't work. When I try to open a MP3 file, It opens correctly, but my speakers don't work. And the last thing is... Compiz doesn't work! Well, nothing about Desktop Effects work. I also don't know where should I set up those Desktop Effects (I know how in Ubuntu, but in Debian...).
View 3 Replies
View Related
May 22, 2011
how to install this driver?
I disabled X server and I blacklisted nouveau kernel, but when I try to install the driver it says Error: Could not create the kernel module.
View 14 Replies
View Related
Jan 24, 2010
Using VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.
View 1 Replies
View Related
Apr 25, 2011
I think about editing and compressing some avi files and want to install cinelerra-cv. However there are some dependency problems it seems...
aptitude install cinelerra-cv cinelerra-doc cinelerra-cv-data
The following NEW packages will be installed:
cinelerra-cv cinelerra-cv-data cinelerra-doc libavcore0{a} libavutil50{a} libfaac0{a} libmjpegtools-1.9{a} libmp3lame0{a} libmpeg3-1{a} libmpeg3hv-1.5.0-1{a} libquicktime1{a} libquicktimehv-1.6.0-1{a} libva-x11-1{a} libva1{a} libx264-112{a} libxvidcore4{a} mpeg3-utils{a} ttf-bitstream-vera{a}
The following packages will be upgraded: libavcodec52 libpostproc51 libswscale0 3 packages upgraded, 18 newly installed, 0 to remove and 5 not upgraded. Need to get 16.5 MB of archives. After unpacking 31.5 MB will be used. The following packages have unmet dependencies: libavformat52: Depends: libavcodec52 (< 4:0.5.2-99) but 5:0.6.1+svn20101128-0.2 is to be installed. or libavcodec-extra-52 (< 4:0.5.2-99) which is a virtual package. The following actions will resolve these dependencies:
[code]....
Normally I say yes and hope for good, but this time... I do not use adobe flash player, but I would still like to watch ..... videos. Would be hard without gnash, right? I use iron portable and iceweasel. Also I use totem a lot, but aptitude seems not being able to resolve this inconsistency automatically. My question is: what would happen, if I just say "y"? gnash is completly away? And is there any way to install newer version of gnash or do whatever to have everything working?
View 2 Replies
View Related
Jul 8, 2009
I installed the new debian_lenny_5.0.1_amd64 x64, i am having a nVidia Geforce 8500 GT 512 RAM display card. I was trying to install the driver using the synaptic package manager. I installed them, but i was not able to use the driver. I don't know where the drivers are installed and how to use it. I checked the xorg.conf , and the nVidia driver is not listed there. how to install them .
View 9 Replies
View Related
May 1, 2011
I downloaded and installed Debian 6.0.1a last night (CD image #1).
It had no music player, but I could play ogg files and the sound was OK.
Then I installed Banshee and (which installed some more packages). Now the sound is gone.
I installed Debian on my Asus EEE 1015P netbook.
View 1 Replies
View Related
May 11, 2011
I use to use Ubuntu and recently came to Fedora, I am not a fan of the package manager in Fedora so I am trying to install things through terminal and when I use Sudo cause that is what I am familiar with this is what it gives me.
Devon is not in the sudoers file. This incident will be reported.
What do I do? I am just trying to install Libreoffice 3.3 and Banshee 2.0
View 10 Replies
View Related
Apr 8, 2015
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree   Â
Reading state information... Done
The following extra packages will be installed:
 libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
View 1 Replies
View Related
Dec 23, 2010
I have windows 7 64 bit installed. I used the universal-installer to put Ubuntu 10.10 (64bit version) on my USB. I have partitioned my hard drive into 4 partitions. First partition for windows 7 system reserve. Second partition C for the main part of windows 7. The third partition is logical and it is for random stuff. The fourth I intend to install Ubuntu on it. I tried to left this fourth partition unallocated, format it into ext3, format it into NTFS, but in any case, the Ubuntu installer can not detect that I already have another OS on my HD, and when I go into that "special partition option", Ubuntu installer only let me repartition anything. It can't see the existing partitions. Below is the result of the bootscript.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Syslinux is installed in the MBR of /dev/sdb
[Code]...
Strange thing is that Gparted and the installer can not see the existing partition (partition table unrecognised in Gparted). It tells me that my whole hard drive is unallocated. However the script, which I think uses fdisk, can see the existing partitions.
View 3 Replies
View Related
May 4, 2010
i know that the command /.configure will make the "make" file and then i have to make " make install" to install the app. but how to deal with the dependency problem ? i asked my friend about it and he said why dont you use apt instead to install packages but what if i want to use distos like slackware? anyway that friend was not interested in helping me out and i m not expecting to. but can anybody answer this in detail or provide any document on this..
View 6 Replies
View Related
Jul 9, 2011
I have a fresh install of Debian Squeeze AMD64 which I'm trying to install KVM on. I have no idea what I'm doing so I figured someone on these forums might be able to explain it. I have already verified VT support and enabled it in the bios. I have googled and read about KVM installation but everything I can find is either confusing or doesn't work. Also I am trying to install it from source because I want to experiment with modifying it later.
View 10 Replies
View Related
Jan 18, 2011
i am trying to install libtorrent and rtorrent from source packages. however while configuring i get this:
Code:
checking for OPENSSL... configure: error: Package requirements (openssl) were not met:
No package 'openssl' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. i ve come to "PKG_CONFIG_PATH" a lot of times while trying to install something manually on fedora.
View 8 Replies
View Related
May 16, 2010
OS: Ubuntu 10.04.
When I try to install some packages by aptitude, I see this:
Before it, I made it (sudo apt-cdrom add):
And it (sudo apt-get update):
My dvd-disk is not broken - md5 checksum is right. In sources.list I have only cdrom source, without any network repositories. When I install one package (for example pptp-linux) which don't use any depending, it work good, but when I have some group of packages - installed only first package from this group, you can see this in a first image, marked by yellow color and set to 16 percent.
View 9 Replies
View Related
Jul 4, 2010
installing compiz 0.9.0 from source
ive downloaded the source tar.gz from here,
but i do not know how to install it (USUALLY USE .debs, ppa, .sh
View 8 Replies
View Related
Oct 16, 2010
i want to install hydra-5.4 from source . but at first in ./configure i have this problem :
Code:
Checking for SAP/R3 (librfc/saprfc.h) ...
.. NOT found, module sapr3 disabled i didn't want that in any place such as it's site.how can i fix this problem?
View 1 Replies
View Related
Feb 25, 2011
Since I cannot find a deb of thunderbird 3.3, I would like to find another way to install 3.3 on maverick. I have no experience installing from source, so I may need to be coached through it step by step, but I am eager to learn and VERY motivated Why? I am trying to switch from gmail webmail to thunderbird, because of enigmail and privacy. However, I have been spoiled by gmail's elegance, and in order to get the conversation view add-on, so thunderbird still looks like gmail, the add-on requires the 3.3 version of thunderbird. The latest stable version which is in the repos (maverick) is older (3.1). I have already have done the following:
Code:
sudo apt-get install build-essential
then i downloaded the files and extracted to my home directory.now, according to the ubuntugeek, I should execute the following commands:
Code:
./configure make
sudo make install
clean install
but I have a few doubts:
1) Should I first uninstall thunderbird 3.1? and enigmail?
2) Where do I install it, so it can still find my mails and work as now?
3) If it doesn't work out, can I go back, and if so, how? Once installed, will it be uninstallable from apt or synaptic?
4) Will Ubuntu continue to upgrade my thunderbird once a newer version is available at some time in the future?
View 9 Replies
View Related
Sep 17, 2010
I am trying to install gcc from source, but wish to install to an alternative location, ie /opt/gcc/4.4.4.
I have done so but ran into the problem that the system libs in /usr/lib64 were being located before my libs in /opt/gcc/4.4.4/lib64.
So, I set --libdir=/usr/lib and reinstalled. The libs link in correctly, but now g++ cant find includes, for instance <complex>. I think I could set CPATH to point to the locations of these includes but that doesn't seem like it should be necessary.
So my question is, what is the correct way to install gcc alongside the system versions while allowing linkage to the right libs and location of the includes? I don't want to use prefixes or suffixes because the intel compiler looks at gcc -v to get clues as to how to compile stuff.
It should be noted that I have no internet connectivity on this machine, so building from source is my only option.
View 3 Replies
View Related
Jan 8, 2010
I'm attempting to install clisp from source and I get the following message at the end of running
[Code]...
I did as it suggests and opened the config.lisp but I am unsure where I add the unlimit command so it will work properly. I tried just dropping it at the top of the file but it did not do anything.
View 14 Replies
View Related
Jun 10, 2010
I am following these instructions to install gnu backgammon. However I am doing this for the first time and I don't know how to get their source code from their site (here). Do I download everything?
View 2 Replies
View Related
Sep 7, 2010
Im trying to install mupen64plus, but to be honest, everything i have installed is from the package manager.I have no idea how to do this through the terminal. But I tried installing the mupen64plus from the package manager, and everytime I open a rom, mupen64plus closes and doesnt load anything....
That version was 1.5, and I downloaded 1.99.3 or whatever it is from the mupen site, but I cant get the sucker to install. There is a install.sh file which I chmod +x too. I then tried, ,/install.sh, make install.
View 2 Replies
View Related
Mar 6, 2011
I was wondering if there are any tools that automate the process of installing from source for example tar.gz or tar.bz2. I have used kludge installer but I am looking for something that doesn't make me install any dependencies for example I want a bash shell script it just runs the commands you normally do but faster.
View 2 Replies
View Related
May 23, 2011
I am having a problem installing a program, AudioTester v1.6 and tests FLACs for errors. [URL]. The .zip file has a windows executable '.exe' and the source code. The code was written for Windows. The source code is written in C++ (.cpp) with C header (.h) files, xml (.vcproj) and one '.exe.manifest'(?) file. I tried the usual commands for compiling (./configure, autogen, make) the source code but no luck. Can I compile this code for Ubuntu/linux? Is there anything I can do with the code? And If so what do I need to do.
View 6 Replies
View Related
May 2, 2010
I'm having trouble installing a usb wireless adapter.
Code: # lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c526 Logitech, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0bda:8171 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(It came with a linux driver but not sure how to install it)
Code: /2009_1106_RT3070_Linux_STA_V2.1.1.0 (2) # ls
chips
iwpriv_usage.txt
README_STA_usb
sta
common
Makefile
RT2870STACard.dat
sta_ate_iwpriv_usage.txt
include
os
RT2870STA.dat
tools the readme just has a change log, no instructions.
View 9 Replies
View Related
Aug 2, 2011
how to upgrade or install a updated kernel version (3.0).I am using RHEL 5 with kernel 2.6.18-8.I am trying to upgrade through source downloaded at [URL.Also will it be a good practice to upgrade the existing kernel?
View 3 Replies
View Related
Mar 3, 2011
I just tried installing mysql on my vps from source code. after untaring the source code. when i tried to configure the ./configure script. iwas not able to find it. it is not there.
View 1 Replies
View Related
Jun 27, 2011
I am trying to install an rpm and when I run rpm -ivvh "package" I get this output
Quote:
Expected size: 29111 = lead(96)+sigs(180)+pad(4)+data(28831) D:
Actual size: 29111 D: ldipmi-8.50.0.i386.rpm: Header SHA1 digest: OK (d3665fbf1c1a418ac1bf17befe92870b95c1a446) D: added binary package [0] D: ============== /root /root: not an rpm package (or package manifest): Is a directory D: found 0 source and 1 binary packages
View 5 Replies
View Related
Apr 10, 2011
I just started to use debian at what i would call full speed as soon as i received my copy of the debian 6.0.0 DVDs. i installed it on two offline desktops, one for a friend. i have been able to install certain softwares that don't come along with the distribution such as firefox 4, openoffice 3.3, the latest jdk_update_24, and others, and i've been able to configure them to work well i think... but now, i learnt of the new gnome 3 that has been released recently. i've ofcourse downloaded all the source files at [URL] but now am facing a problem of how i can install these on to the debian computers (they don't have any internet connection).
View 4 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
