After updating my debian testing machine I got some trouble with external usb devices. The system is able to see them but it doesn't want to mount them.
This is the error I receive:
Code: Select all Error mounting filesystem
Not authorized to perform operation (udisks-error-quark, 4)...
Unable to mount 1.0 TB Filesystem
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
[code]....
it only occurs on one HD it has ext4 file system just like the other external HD I have and the disk is healthy. It does mount with no problem at my netbook using ubuntu.
Unless I am logged in as root, I am unable to mount an external device (such as a flash drive or music player) This is what I get: I can, of course, pull up a root terminal and use the mount command, but I don't want every user to have access to the root terminal, but I would like everyone to be able to mount external devices. Code: Linux debian 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
View 9 Replies View Relatedusb devices, such as external hdd, memory stick and mp3 player, when I connect them to USB, they show up in Nautilus, but when I click on them, Nautilus is unable to mount them and returns the following error: Unable to mount location Error mounting: mount exited with exit code 1: helper failed with:mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error in some cases useful info is found in syslog - try dmesg | tail or so
View 3 Replies View RelatedI have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I am unable to mount an external in my linux os.I tried everithing,but not succeed.Linux os ver: RHEL 4(nahant update 5)Problem description: when I insert an external,autometically the icon will show at 'my computer'.But when I tried to open the device,the message will show that "device is already mounted or busy" I checked that one entry is autometically done in fstab after inserting the external.But "mount" command does not show it. I tried every possible command to mannually mount,but no effect.This problem is occure in only one server,but there is no such problem in other servers running same configuration.
View 5 Replies View RelatedHaving issues while mounting my 1TB passport USB drive. When running this command....
Code:
sudo mount /dev/sdc /mnt/WD/
I got this error: mount: you must specify the filesystem type I even tried adding the filesystem, which was or is ext4
Code:
sudo mount -t ext4 /dev/sdc /mnt/WD/
Getting a different error instead:
Code:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I should mention that this was working just a few hours ago. There was a power glitch and my Ubuntu headless server lost power. I turned it on and since then, I am getting this error. I would prefer not to format via GUI .... 1st because I have data there , 2nd, because I don't want to rely on a graphical interface but being able to fix this via terminal.
I have a Seagate Barracuda 7200.10 (IDE) hard drive that was used in winxp as a secondary disk.When I tried to connect it to my Ubuntu laptop via usb cable, it doesn't recognize on its' own.
View 6 Replies View RelatedI wanted to make a clone of my drive, so I tried the ole sudo dd if=/dev/sda1 of=/dev/sdg1 trick, but first I formatted the drive to the Ext4 format. I wish I would have understood that format a little more before I decided to format it that way. Now I can't access my drive at all. I read almost everything on the net about manually mounting it, but almost everything was in Fat, NTFS, or Ext3/2 format. I even read the Ubuntu documentation. I don't know if it's because my drive is in Ext4 format, or if I'm just not doing something right.
As you can see in the following picture, it recognizes the drive, yet I am unable to mount it. I am trying to access the 160 GB drive. I even tried to see if Windows would recognize it. No go. Today while lurking in the Ubuntu Forums I found a way to make a live .iso of my system (which I think is awesome). So now I want to reformat my drive and use it as storage once again. I think I will restore it to NTFS. I thought that the Ext4 format would work better in Linux (which I was wrong), but now I need Windows to recognize it as well, and it needs to be able to store files bigger than 4 GB (unless you have a suggestion on what to format it as).
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-2.6.9.89EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
mount partition with ntfs parttion in linux.
I'm having problems mounting my NTFS external hard drive .
dmseg :
Code:
1.padlock: VIA PadLock Hash Engine not detected.
2.PPP MPPE Compression module registered
3.PPP BSD Compression module registered
4.PPP Deflate Compression module registered
5.npviewer.bin[5405]: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4
6.usb 4-2: new high speed USB device using ehci_hcd and address 5
[code].....
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies View RelatedI have a debian machine with an external harddrive. I have a windows machine on the same network from which I can read the files from the debian drive, but I cant write to it.
At some point in time (several months ago?) I could.
currently, I have this line in my /etc/fstab: /dev/sdb1 /media/MUSIC/ vfat user,uid=1000,gid=1000,rw,umask=000 0 0
and i've tried a hundred different mount commands (but not as many as i've tried fstab lines) but generally have been using this at start up: sudo mount /dev/sdb1 /media/MUSIC/ (i am under the impression that i should not have to use 'sudo' when doing this, since the fstab line includes 'user' but if i dont, the command fails)
no matter what I've tried, the permissions come out as owned by root: drwxr-xr-x 905 root root 163840 2010-10-17 17:45 Music attempting (as root) to change ownership of the directory also does not work: chown: changing ownership of `/media/MUSIC/': Operation not permitted (because its a FAT file system, i think)
I am using Debian 6.0. When I try to mount a drive (USB) in GNOME or using udisks, I end up with following error message:
Code:
And the when executing
Code:
Code:
Seems like it is trying to mount a CD.
But I am able to mount the same using
Code:
I tried the same with different filesystem and getting same message form udisks.
I am able mount other hard disk partition using udisks:
Code:
How to mount drives using udisks. I don't know how I can configure udisks.
I have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies View RelatedI have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies View RelatedI am running wheezy + xfce. When I attempt to mount any external volume in Thunar, I get a message saying "Unable to mount-- not authorized." This is problem #1. A bigger problem that I think is related is my wireless. Logged in as a normal user, I cannot connect to any wireless networks using network-manager. My wireless card is functional and I can see all the networks around me, but when I click on one to connect, nothing happens. No password prompt, nothing. Strangely, when I log in as root, wireless works flawlessly. I am a member of the netdev group.
View 4 Replies View RelatedI bought a new external HDD - a Seagate 2 TB (actually 1.8 TB) but am unable to mount it. The drive is USB 3.0 while the ports on my system are USB 2.0 but that is NOT the issue. I am able to see the HDD without an issue on the CLI. I am on Jessie 64-bit.
Code: Select all$ lsusb
Bus 005 Device 003: ID 0bc2:ab24 Seagate RSS LLC
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
My question is why it does not automount. Also if I should try to manually mount it, how should I go about it ?
I got the disks pre-formatted in around 500 GB (or as close to it) multiples as can be seen.
The other question is why does /dev/sdb4 show some different dialog than the rest ?
Santa brought me an early Christmas present: a new External HD - Verbatim CLÖN - 250GBPlug it in and it works great. Problem is this: I do not use Windows at all just Debian Squeeze and this thing is formatted FAT32 - an ancient format.I would prefer EXT3 or maybe NTFS to be compatible with Windows "IF" there is a need (cousins etc).However as soon as I format it to NTFS or Ext3 it becomes "root" only.This is my HD, how can I format it and keep permissions for myself?
A friend suggested changing /etc/fuse.conf
# Set the maximum number of FUSE mounts allowed to non-root users.
# The default is 1000.
[code]....
I want all my external drives mounted when I start OS.I don't want to do it for a specific external drive. I want my external drives mounted by default.o you have an idea? Does linux have such a configuration I can change?
View 8 Replies View RelatedHow to mount multiple external HDD's. I'd like to link or mount the music, torrents, and general files from several external hard drives and apply permissions (in some cases I only want the mount or link to be read only).
My setup:
- Seagate Dockstar running Debian squeeze (it's headless so I don't have a gui running)
- Two external HDD's with one partition on each (250GB and 400GB)
What I'd like to accomplish:
1. Mount the external HDD's to /media/HDDs as read/write (this is already working using udev and autofs and it's available in samba)
2. I'd like the MUSIC directories on both external HDD's to show up under the same mount point. In other words I want the MUSIC folders (from both HDD's) to appear as one large library of music. And I only want this to be readonly. It will be used as the library for mpd and/or squeezebox.
3. Mount a directory used to download torrents to. I'll probably pick on HDD as the target for torrent dowloads. But let me know if you have any other ideas regarding this.
Since I have the first one done, how would I accomplish 2 & 3?
I just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies View RelatedI have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
I can't mount my external hard drive with the graphic interface of my Xfce desktop anymore, since the latest upgrade.
The disk does show up, but when I try mounting it, I get a pop up window telling me that :
Failed to mount "My_Passport". Not authorized to perform operation.
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
View 4 Replies View RelatedI'm running the live 6.0.1 dvd in my Toshiba Satellite laptop and all is working fine except the sound only plays thru the built in speakers. I can't get it to run out the headphone outlet to a set of external speakers.
View 5 Replies View RelatedI'm using Jessie 8.3 on Dell laptop Latitude E7240.
Now when I plug the laptop in the Dell eDock docking station, external monitor connected through DisplayPort and it is detected (according to xrandr output).
BUT nothing shows on the monitor (it stays black) and I get errors repeating in the kernel log:
[ 71.064428] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting.