Ubuntu :: Unable To Mount Ext4 External Hard Drive
Jul 5, 2010
I wanted to make a clone of my drive, so I tried the ole sudo dd if=/dev/sda1 of=/dev/sdg1 trick, but first I formatted the drive to the Ext4 format. I wish I would have understood that format a little more before I decided to format it that way. Now I can't access my drive at all. I read almost everything on the net about manually mounting it, but almost everything was in Fat, NTFS, or Ext3/2 format. I even read the Ubuntu documentation. I don't know if it's because my drive is in Ext4 format, or if I'm just not doing something right.
As you can see in the following picture, it recognizes the drive, yet I am unable to mount it. I am trying to access the 160 GB drive. I even tried to see if Windows would recognize it. No go. Today while lurking in the Ubuntu Forums I found a way to make a live .iso of my system (which I think is awesome). So now I want to reformat my drive and use it as storage once again. I think I will restore it to NTFS. I thought that the Ext4 format would work better in Linux (which I was wrong), but now I need Windows to recognize it as well, and it needs to be able to store files bigger than 4 GB (unless you have a suggestion on what to format it as).
View 9 Replies
ADVERTISEMENT
Sep 27, 2010
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
View 9 Replies
View Related
Jun 21, 2011
I'm having problems mounting my NTFS external hard drive .
dmseg :
Code:
1.padlock: VIA PadLock Hash Engine not detected.
2.PPP MPPE Compression module registered
3.PPP BSD Compression module registered
4.PPP Deflate Compression module registered
5.npviewer.bin[5405]: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4
6.usb 4-2: new high speed USB device using ehci_hcd and address 5
[code].....
View 2 Replies
View Related
Feb 22, 2010
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
View 7 Replies
View Related
Jul 13, 2011
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies
View Related
Aug 19, 2011
I tried to install ubuntu 11.04 on my external hard drive (WD My Passport, thats all i remember about the name) and all was well, until I tried to reformat it from ext4 to FAT, and no such luck, it isn't even being READ, not in fdisk -l, not by gparted, disk manager, or anything else. Windows is no help at all... I tried that out of desparation.
View 9 Replies
View Related
May 2, 2010
Recently my laptop broke down and wont start up. I'm currently trying to recover my files to my mac with an IDE to USB cable. It recognized my windows partition fine and I was able to get all my files off of that, but the majority of my stuff is on the ext4 partition that I have on it. Does anyone know how to access the ubuntu partition of this hard drive from my mac?
View 2 Replies
View Related
Apr 7, 2011
Easiest way to auto mount an ext4 partition on my hard drive?
View 3 Replies
View Related
Jan 18, 2010
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies
View Related
Feb 23, 2010
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies
View Related
May 10, 2010
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
View 2 Replies
View Related
Jun 8, 2011
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code:
$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
View 2 Replies
View Related
Mar 17, 2010
I've recently started using a 500gb external hard drive for music and backups. It is always plugged into the computer but doesn't always mount at boot-up and I have to dis-connect and re-connect the USB cable. The desktop icon then appears.The fact that it's mount point changes also means I can't share the Music folder on the external hard drive via Samba (WinXP machines say they can't access the folder) and also Songbird 'loses' the tracks.
How do I permanently mount the external hard drive? I assume it will mean some editing of the fstab file? Unfortunately, I've got no idea of what I should enter on there.The external hard drive volume is called 'Music and BackUps' - Gparted screengrab attached.
View 9 Replies
View Related
Apr 9, 2010
I recently reformatted my external hard drive. Somewhere along the way I think my fstab got messed up because now my hard drive won't mount. Instead I get the following error:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try dmesg | tail or so
If I mount it through Gparted, it mounts just fine.
My fstab currently looks like this:
View 3 Replies
View Related
May 15, 2010
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies
View Related
Jun 2, 2010
I have some documents that I need to copy from my old disk that has Fedora 9 on it. I bought external usb case for 2'5" disk but when I connect it through usb cable I can only hear it running but there's not much of the auto-detection.
View 9 Replies
View Related
Feb 14, 2011
Been using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
View 7 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
Aug 22, 2010
I have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies
View Related
Jan 20, 2010
I am trying to recover files off a 3.5" IDE Hard Drive that had Windows ME installed on it. I have access to a MacBook, Windows XP Desktop PC, and a cd with Ubuntu 8.10 on it.
Attempts:
1) If I make the HD the only primary master HD it won't boot up.
2) If I make it a slave drive it won't boot up.
3) I purchased an external enclosure from Radio Shack which turned out to be crap and online reports supported this conclusion. I got nowhere with that thing. Bestbuy doesn't sell 3.5" IDE enclosures.
4) By using an IDE / SATA to USB kit, I am able to connect the HD to the PC via USB cable. XP will detect the drive, however the HD will not my displayed under "My Computer" nor "Disk Management".
Onto linux (this is where I grabbed the Ubuntu cd):
5) When connected, the HD will show up under "Computer" as a "USB Drive". When I double click on it I get the error "Unable to mount location Can't mount file".
Allow me to show you some commands I ran:
Code:
Code:
Code:
View 14 Replies
View Related
Jan 6, 2010
how could I mount a Toshiba external hard disc drive to my Ubuntu 9.04?
View 3 Replies
View Related
Dec 23, 2010
I have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
View 1 Replies
View Related
May 6, 2010
I;ve been using Ubuntu (10.xx) for a few months now and am really getting the hang of it.My NAS drive has now failed.It is a WD Mybook world edition 1tb with the blue rings.The drive spins fine and in windows I can see the partitions but I understand the file system is linux based.Can anyone help as to how I can mount the drive and recover the files using ubuntu / linux.I have a USB caddy to connect the SATA drive to my laptop.
View 9 Replies
View Related
Oct 7, 2010
I try
mount -t ntfs -o rw /dev/sdb1 /mnt/exthdd
it doesn't give me any response so I presume it succeeded but when I try to touch it, it tells me it's a read-only file system
View 1 Replies
View Related
Jan 30, 2010
Manually mount or fix my external hard drive. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drive from Iomega. When I plug it in, a message appears that reads:
"Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb2,missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg | tail or so".
Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received the following:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Partition table entries are not in disk order
View 2 Replies
View Related
Sep 3, 2010
Earlier this year I encountered a problem with my external hard drive; it would not mount automatically and I kept getting an error message. Last time I was able to fix it by typing in the terminal 'sudo fsck /dev/sdb2'. Once again it's not mounting automatically and I'm not even getting the error message. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drivefrom Iomega. Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received thefollowing:WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Jan 3, 2010
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies
View Related
Apr 10, 2011
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
View 2 Replies
View Related
Nov 15, 2010
I've been running Linux for a year on our family computers (one desktop, one laptop and two netbooks). I've run into a problem with the encrypted ext4 partition (270GB) on a LaCie external hard drive which also has a NTFS partition (50GB) which is not encrypted . First two times I tried using the encrypted ext4 partition (from two different computers) it worked fine but now I can't access it at all. I can still access the NTFS partition.Encrypted external hard drive partition will unlock but won't mount (or unmount). The computer says "Opening 320GB Hard Disk" but after a minute says, "Unable to mount location. DBus error org.freedesktop.DBus.Error.NoReply"Disk utility (GUI for gparted I believe) states that the encrypted partition (/dev/sdb1) is unlocked and the underlying partition (/dev/dm-0) is not mounted but it has a "busy circle sign" on it that will not turn off. The NTFS partition on the same drive mounts and accesses normally.
But if I try to unmount the NTFS partition, it says: "Unable to stop drive. One or more partitions are busy on /dev/sdb"If I try to shut down the computer, it is unable to shut down because (I assume) it can't shut down that drive either. So I have to just turn off the computer.fdisk states that /dev/dm-0 doesn't have a valid partition table [full output attached]fsck suggests: "Filesystem mounted or opened exclusively by another program?"ps axuf shows some processes running on /dev/dm-0 but killinghem doesn't release the drive either. [full output attached]I checked /etc/blkid.tab (suggested in one vaguely related thread) and there's no actual file only a broken link pointing to /dev/.blkid.tab (which doesn't exist). I tried deleting this link and rebooting but that didn't change anything.when I finally gave up my data as lost, I tried to format the partition (using Disk Utility) and it refused saying, "One or more block devices are holding /dev/sdb"
View 1 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
