Debian :: Wireless Card Not Working After Rebooting
Jun 21, 2010
I have a DELL Vostro 1500 and I have Debian Lenny running on it. I did get the wireless card BCM4312 working but after doing apt-get update followed by apt-get upgrade and after rebooting it stopped working. I am including the output from iwconfig, ifconfig and lsmod.
raygo75@RayGo-d3:~$ sudo ifconfig eth1
[sudo] password for raygo75:
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
I think I will mentions that I got the wireless card working after following the instructions at [URL]
View 7 Replies
ADVERTISEMENT
Jul 14, 2010
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
View 1 Replies
View Related
Jun 4, 2010
I have a Dell Vostro 1500 that has a Broadcom BCM4312 wireless card installed. I do not have access to a wired connection to the web so any thing I have to install is a download on my windows machine and then transfer that to the debian machine. I just finished installing Debian Squeeze but can not get my wireless card to scan for any networks. I found a tutorial at [URL] and followed the steps there. Finding all the dependances and installing them one by one (took me all day). My wireless card still will not scan for networks. After doing a 'sudo ifconfig eth1 up' it still will not scan for networks.
Output from ifconfig:
raygo75@RayGo-2:~$ sudo ifconfig
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
lo
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1900 (1.8 KiB) TX bytes:1900 (1.8 KiB) .....
How do I get around this? It wants to get something from [URL] and I do not have internet access. It looks to me like it just wants to download the wl dirver, again, which I have done in the previous instructions I found. I am a retired UNIX (hp-unix) administrator so I know my way around the system.
View 14 Replies
View Related
Mar 3, 2010
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies
View Related
May 15, 2010
I am pretty new to Linux still. I have a desktop I'm trying to set up as a Linux machine. I'm apparently running a testing version of squeeze (I was running lenny I thought too many updates?). Anyway, I've been trying various things all night to try to get my wireless card to work. The system tells me I have a Broadcom BCM4318. When I run dmesg I get this:
[ 496.640869] b43-phy0 ERROR: You must go to [URL] and download the latest firmware (version 4).
[ 619.374662] input: b43-phy0 as /class/input/input25
[ 619.410838] firmware: requesting b43/ucode5.fw
[ 619.416638] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Over and over. When I head to the website, it tells me to run b43-fwcutter. I've tried installing that and it says it installs fine but nothing ever changes. Everything I've found says that should work so I can't really find any suggestions for what to do if it doesn't.
View 7 Replies
View Related
Jun 1, 2011
I just installed Debian after I became fed up with Ubuntu. I'm trying to get my wireless card to work so I can move my computer back to it's proper place. Right now I have to put it right next to the router so the Ethernet cable can reach. Anyways, I've had trouble with this card before, so I did a quick google search. I found this: [URL]. I followed the instructions, and the thing at the top of the panel shows a list of wireless networks. When I try to connect to mine, it asks me for authentication. When I give it authentication, it idles for a while before asking me again.
Here's some system information:
uname -a
Linux max-pc 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux
lsmod | grep rt2860sta
rt2860sta 454573 1
crc_ccitt 1323 1 rt2860sta .....
From what I recall, when I used Ubuntu it was called ra0. Could this have something to do with it?
View 3 Replies
View Related
Sep 11, 2011
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
View 4 Replies
View Related
Feb 28, 2010
I have an acer lab top and OpenSuSE 11.2 installed but now the wireless card is not working. With ubuntu I had a tool called jokey to install missing drivers. Does there exist a jockey version (rpm not deb) for OpenSUSE or is there i simillar tool.
View 1 Replies
View Related
Apr 5, 2010
I want to convert my laptop to Linux only machine. My Wireless card is Netgear WG511 and from the little research I have done it is not going to work under Linux. What is an easy to get working Wireless card? I have a Dell Inspiron 8500 and I plan to install Ubuntu 9.10.
View 12 Replies
View Related
Jan 5, 2011
I'm running Fedora 14. Sabrent PCI-G802 PCI Wireless Card - 54Mbps, 802.11g, Windows/Mac/Linux Compatible [URL]. I bought this card (under $20) and it worked out of the box. I'll be buying the Sabrent N PCI (which they make) card once I upgrade my network/router.
View 1 Replies
View Related
Apr 24, 2010
I have an HP Pavillion tx1410us and I cannot seem to get my wireless card working or recognized. I am not sure if I need another driver, or I need to start another service. I am running Fedora 12 64 bit.
View 5 Replies
View Related
Mar 18, 2010
I have a dwa-125 dlink wireless card which will not work. This is my first time using OpenSuse 11.2 (Well OpenSuse period). I had the same problem with Ubuntu 9.10 as well. If it will help the solution I used with Ubuntu is here: [ubuntu] Dlink DWA-125 Wireless Card Issue - Page 4 - Ubuntu Forums. I'd rather use OpenSuse than Ubuntu.
View 4 Replies
View Related
May 13, 2010
I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
View 7 Replies
View Related
Oct 10, 2010
I installed 10.10 on my 2nd laptop with the SAME internal wireless card as my other laptop, but Ubuntu all of a sudden acts like I have no wireless card? When I click on the network icon in the panel, Wireless Connections is enabled, but Ubuntu shows no available wireless networks? I can switch to my other laptop and it works fine.
View 9 Replies
View Related
May 2, 2010
I am trying openSUSE after a long break from Linux, but I am running into the original issue I ran into several years ago which made me decide not to use this distro. My LAN card is working fine, and I can get internet hardwired into my router, but I am not having any luck getting my wireless card recognized or working. Also, my notification area on my taskbar (sorry for the Windows terms) is not showing any sort of network status icon.
I have gone Computer>Install Software> and installed the b43 fwcutter thing from the repos, and have also run the following command in terminal:
sudo /usr/sbin/install_bcm43xx_firmware
In Network Settings in YaST, my NIC is showing, but I am still not seeing my Wireless card.
View 1 Replies
View Related
Jan 9, 2010
I have a relatively new F12 install (one week old) on which I got my wireless Broadcom card working using kmod-wl-PAE. It was a very easy process - not really a process just yum install kmod-wl-PAE.
After a few updates, I notice that the wireless card stopped working. I assumed maybe there was an update that conflicted, so I did a reinstall of kmod-wl-PAE and it worked again immediately.
Then I started installing compiz-fusion. Immediately after, wireless is broken again. So I yum erase kmod-wl-PAE and then yum install kmod-wl-PAE and it works again.
Now, only slightly later that same day, wireless stops working more or less randomly and I cannot get the reinstall of kmod-wl-PAE to fix it. So I uninstall, disable compiz-fusion, shut down, and restart the computer to try again. My thought is that maybe along the way my autostart compiz or something about compiz is causing the wireless not to configure properly. When I restart, wireless is working. Without kmod-wl-PAE installed:
yum info kmod-wl-PaE
Loaded plugins: presto, refresh-packagekit
Available Packages
Name : kmod-wl-PAE
Arch : i686
[Code].....
One, how is this even possible, and two, what is going on with the wireless working, not working, working, not working?
View 14 Replies
View Related
Apr 9, 2010
I recently purchased an Acer eMachines E525 laptop, and currently have it dual booting Windows 7 and Fedora 12 x86_64 with the 2.6.31.5-127 kernel. I've been completely unable to get the wireless card working in Fedora (it works fine in windows).
lspci lists the following about the wireless card:
Code:
Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
so I assume it's a BCM4312.
So far I have tried downloading the driver from [URL] and then trying to install it according to the accompanying readme file: [URL]. However, when I try to make the driver, I get the following message:
Code:
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make: *** /lib/modules/2.6.32.10-90.fc12.x86_64/build: No such file or directory. Stop.
The Readme says that if I get this kind of error, I need to install the "kernel-devel" package, but I have this installed and it still returns the same error.
I have also tried following the fw-cutter instructions for fedora from [URL], but it still doesn't work. I realise there's the option of using ndiswrapper, but I gave that a shot with Fedora 11 on the same machine and had no luck, and I'd really like to see whether any of the other options work before going down that route.
View 6 Replies
View Related
Jun 2, 2010
I am new to fedora linux. I want to know how to install wireless driver for my Dell Wireless Dell Wireless 1397 802.11b/g Half Mini Card. I am using fedora 13. Below is my lspci command outuput.
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) .....
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
View 11 Replies
View Related
Mar 11, 2010
I have a AR928X wireless card and everything I have tried has failed. The default driver ath9k scans and connects to my router but cant connect to any site or ping anything , same with the madwifi driver
lspci prints
02:00.0 Network controller: Atheros Communications Inc.
AR928X Wireless Network Adapter (PCI-Express) (rev 01)
View 1 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
May 25, 2010
Well this my first time working with linux and openSUSE, and I love it. But one problem I can't overcome is my network card is not working. I went to bestbuy and bought the dynex enchanced wireless G card.
Model # dx-ebnbc
ver. 1011
I installed wine to run the .exe but that did nothing and gave me that the dll is not registered. openSUSE detects that the card is plugged in but the card does not light up or activate in anyway. The only way I can connect to the net is through an Ethernet cable.
View 9 Replies
View Related
Aug 18, 2011
To become familiar with unix I decided to install a partition of openSUSE. I'm currently running 11.4 and how to get my wireless card working. I know that I have an RTL8188CE. I downloaded the realtek drivers from Realtek However, when I try to execute the make command I get the following error:
make: *** /lib/modules/2.6.34.7-0.5-default/build: No such file or directory. Stop.
make: *** [all] Error 2
I've made sure that I've installed the packages in both the base development and the C, C++ packages. I looked under the base development package and know for sure that i have make installed. I'm not really what i'm missing
View 9 Replies
View Related
Feb 20, 2010
I have been trying to get my Trendnet TEW-649UB wireless card to work on Karmic. I have ndiswrapper "installed", but it doesn't seem to be working. I have reinstalled ndiswrapper-utils 1.9 and ndiswrapper-common from synaptic, but not ndisgtk (the GUI for ndiswrapper). When I try to see if any drivers are installed using terminal (ndiswrapper -i) the terminal freezes on me.
Previously I tried using the help doc for installing Trendnet wireless drivers, but I was met with no success. After my first try using the help doc it seemed that ndiswrapper was working correctly and the driver was installed, but when I tried to connect to my network my wireless was listed as "device not managed". If this helps at all the current state of my /etc/network/interfaces is: auto lo iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
When I run iwconfig I get:
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
but when I try to install the driver using ndiswrapper -i I get the message: driver net8192su is already installed Right now my computer is not even reading that the wireless card is avaliable. When I left click on the network icon I can only see that I am on a wired network {ifupdown (wlan0)}. My computer is dual booted with Vista and the card works there, but for some reason I am having trouble with Ubuntu.
View 4 Replies
View Related
Apr 4, 2010
I've just installed Ubuntu (Koala) on an old (but worthy) Toshiba laptop. It's got a Sitecom WL-140 wireless card. (BTW I'm new to Ubuntu, but an old hand at Solaris). Can't get the card to work, although I think It's nearly there. nm-tool shows driver is p54pci. The activity light shows an orange light occasionally. State is disconnected. I'm not really sure whether I should be using the supplied driver (p54pci) or the Windows driver for this card and ndiswrapper. I've installed the Windows driver with ndiswrapper thinking this may fix it but no.
ndiswrapper -l says wlancig: driver installed and device (1260:3886) present.
View 1 Replies
View Related
Apr 10, 2010
I have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
View 1 Replies
View Related
May 18, 2010
After upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies
View Related
Jun 30, 2010
I have a Compaq AMD64 that has ubuntu 9.04 on one HD that works great. I've installed 10.04 on a separate HD and had problems installing it. I have 10.04 running now but I can't get my wireless card to work. During installation I skipped setting up the wireless network. Now when I boot into the 10.04 partition I cannot get the nm-applet to work. I can't get it onto the task bar and I don't see it anywhere else.
I checked to see what drivers are installed, and since I have no connection with that OS I can't update or DL drivers for it. I'm pretty sure that it is because I skipped setting it up during installation. What do I need to do to get the wireless working now? I checked other threads and none seem to pertain to my situation. Since I have to log into the 9.04 partition, I can't copy/paste outputs very easily.
View 3 Replies
View Related
Nov 21, 2010
I have a Broadcom BCM4311 wireless card on my Dell D620 laptop.
Code:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
Code:
sudo apt-get update
sudo apt-get --reinstall install bcmwl-kernel-source
View 9 Replies
View Related
Nov 27, 2010
I need some help getting my wireless card working.I have a ASUS PCE-N13 and I'm running ubuntu 10.10 AMD64.I have confirmed that the card works running under win xp.The problem I have is that it can't see any available networks.I have downloaded and compile the latest driver from ASUS rt2860sta 2.1.0.0 and added these lines to the blacklist file.
blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib[code]...........
View 1 Replies
View Related
Jan 23, 2010
I just installed ubuntu 9.10 on my hp pavilion dv2110rs and everything worked fine but the wireless card. i cant figure out what is wrong. when i type lspci into the terminal it tells me "01:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)" and i have no idea where to go from here to install a working driver. i tryed to go by the ubuntu guide but i got complettly lost.
View 4 Replies
View Related
