Debian Multimedia :: Wheezy 7.7 ATI Radeon HDMI No Sound
Dec 16, 2014
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
[Code] ....
View 1 Replies
ADVERTISEMENT
May 6, 2014
I recently switched over one of my Ubuntu machines to Debian Wheezy. On the Ubuntu system I was able to get the HDMI audio working by adding radeon.audio=1 to grub. I've tried this on this system to no avail. The fglrx-legacy-driver causes underscan and I'd like to avoid it if possible for convenience.
Things I've tried:
fglrx-legacy-driver - Introduced underscan while not solving the problemradeon.audio=1 in grub boot line - No effectGoogling for several hours - There's a lot of topics about this, but most are old and irrelevant, and the ones that are current enough didn't solve my issue.Yelling at it - HDD light blinked a few times, no change
lspci shows
Code: Select allAudio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
View 14 Replies
View Related
Sep 9, 2010
I bought this Radeon 4670 [URL] to improve my video. Although the description on ATI-AMD webpage [URL] specifies that this card can output up to 7.1 audio through HDMI, Sound Controls only shows the stereo and off option. ATI Catalyst does not have any controls for audio. Is there a way to get 5.1 audio enabled? Using 10.04.
View 8 Replies
View Related
Jun 22, 2011
I recently installed ubuntu 10.10 on HTPC, after having a few RAM and SATA issues everything seems to be working fine, The audio (using HDMI) does not work. Have PC connected using HDMI for video (and I am hoping for audio too, this card is made for this and it has been tested with other OS) however the audio does not work, although in the audio preferences it shows to be using the correct hardware. Testing for sound under sound preferences does not play anything, acts as it it was, but no sound, no error messages either. I went ahead and installed ATIs proprietary drivers in hopes that it would make the audio work, but not luck so far.
View 6 Replies
View Related
Apr 19, 2011
I have a LMDE (Mint Linux Edition based on testing, now Wheezy) i386 that I just did a dist-upgrade on and now it isn't properly detecting my monitor resolution. I have two 1680x1050 monitors, one attached to the DVI and another to a VGA video switch. When I rebooted to the new 2.6.38-2-686 kernel both monitors were giving me 1024x768. I futzed around for a while and could then get the the DVI monitor to correctly identify the proper resolution, but the VGA monitor resolutely refused to see more than 1024x768.
I was able to get the proper resolution by entering these commands:
[Code]...
Should I file a bug report, and if so, with whom? I have to say, the Debian bug report process is not too newbie (or even not-so-newbie) friendly, but I'd like to help if it doesn't require me to hand-configure a MUA.
Also, I suppose I shouldn't mention it in a single post, but my mouse is behaving rather unpredictably now (click speed, selecting), and trying to reboot dismounts the file system and then starts up again giving me my display manager (in my case KDM), without restarting the system (both from "sudo reboot" and trying to restart with KDM or the Gnome widget). If I really want to restart the system I have to halt it first and hit the power button.
View 4 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
Dec 15, 2015
I'm on Jessie, and use KDE.
Sound keeps coming from laptop's speakers, even when HDMI is connected to an external TV.
I've tried to fix this issue using both Pulse Audio Volume Control and KDE's System Settings -> Multimedia -> Audio and Video Settings. No luck. I've read several topics around, but there are plenty of variables to consider.
View 5 Replies
View Related
Dec 25, 2014
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
View 1 Replies
View Related
Feb 21, 2010
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
View 4 Replies
View Related
Apr 29, 2011
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3
[Code]...
View 1 Replies
View Related
May 21, 2011
I want to use the open source radeon driver. My video card is AMD/ATI RADEON HD4850. I want 3D acceleration even if it's inferior to fglrx's although I would like if it exceeded fglrx's performance but the performance of the driver is not the point of this thread. Fortunately, fsck was checking the hard drive upon booting so I had time to write the boot output in this computer which I believe would be of help.
Video card:
Failed to load firmware "radeon/RV770_pfp.bin"
*ERROR* Failed to load firmware!
disabling GPU acceleration
gdm3: rt2x00lib_request_firmware: Error - Failed to request firmware. I attempted to install firmware-linux and do sudo gdm3 but all that did is say gdm3 lasted for 0.x seconds where x changes and it kept re-printing that sentence infinitely. I also rebooted and tried to let gdm3 start itself.
Firstly, I'm assuming the open source driver relies on proprietary firmware. Why is this the case? Secondly, how do I get the radeon/RV770_pfp.bin firmware? Is it not in the firmware-linux package? Why does it matter that GPU acceleration is disabled for loading gdm3? Isn't simple 2D enough? (I'm not saying this because I don't want to have 3D enabled since I do want it enabled but because I would imagine that 2D capabilities are enough to load gdm3). If more information is needed, just ask.
View 12 Replies
View Related
May 27, 2011
I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
View 12 Replies
View Related
May 27, 2011
I'm trying to install radeon 5770 drivers but it fails with this message.... same message when I use sgfxi
Code:
# vim /usr/share/ati/fglrx-install.log
1
2 Creating symlink /var/lib/dkms/fglrx/8.85/source ->
[Code]....
View 3 Replies
View Related
Apr 16, 2011
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
View 5 Replies
View Related
Aug 4, 2011
My /etc/X11/xorg.conf:
Section "Device"
Identifier "HD4850"
Driver "radeon"
Endsection
I have wheezy up to date and the xserver-xorg-video-radeon package is at version 6.14.2-1. I am using the linux-image-2.6.39-2-amd64 package as well for the kernel. When I boot, it stays on the tty1 console and I can't start gdm3 manually (it also doesn't start automatically).
View 1 Replies
View Related
Apr 5, 2010
I want my computer to be used as a DVD/BD player, and as of recently it has rejected its windows install and refuses to reinstall. Ubuntu 9.10 installed without problem, but when I select the X1200 (hdmi) audio output via the top right icon no sound comes out. I've searched this topic and one theory was that if i ran ALSA mixer the x1200 audio might be muted by default; it was not muted. I've also been told to update my catalyst, but using synaptics packet manager to download the catalyst control center, when I run it I get the message no supported hardware found. Is there any way to get this to work, or am I stuck with my speakers/3.5mm jack?
View 1 Replies
View Related
Aug 19, 2010
I have a Dell Optiplex GX280 with an ATI Radeon 3470 HDMI card. I'd like to install Ubuntu on this computer, and I'd like to use my Olevia HDTV as a monitor and use it as a media computer. I attach the tv to the computer via HDMI, and boot to the Ubuntu install disk - I'm presented with an 'Invalid Format' error message, and no video on the tv. Is there any way around this error so I can continue the install?
View 3 Replies
View Related
Jun 15, 2014
I am running a small Debian Jessie installation on my Zotac Nano AD10 (based on AMD's E-350, Radeon 6310). I use it as an MPD server, it outputs to my receiver over HDMI.
Up until kernel 3.11 that works fine. My GRUB command line looks like this (default grub.cfg file):
Code: Select all$ grep radeon /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet elevator=noop radeon.audio=1 radeon.dpm=1"
Up till 3.11, this worked fine. The available outputs in alsamixer are unmuted [00]. Aplay reports this:
Code: Select all$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also set the HDMI output as system-wide default:
Code: Select all$ cat /etc/asound.conf
pcm.!default {
type plug
slave {
pcm "hw:0,3" # HDMI audio
}
}
Running speakertest on device 0,3 though, - no sound:
Code: Select all$ speaker-test --device plughw:0,3
speaker-test 1.0.27.2
Playback device is plughw:0,3
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
[Code] ...
I've tried fixing this repeatedly (3.12, 3.13, 3.14) but everytime i find myself returning to 3.11 because that keeps working.... Some posts suggest running xrandr could get it working, but this is a headless installation, so I cannot use xrandr.
For reference, OpenELEC works on this same system (separate install), and they're up to 3.14 as well. Never had a problem with OpenELEC and the audio not working.
View 1 Replies
View Related
Jan 17, 2014
Sound is not working perfectly since installation. I fixed it by command: 'alsactl init' every time sound doesn't come out. However, since last week, sound was not working. I suspect it was caused by the 'apt-get upgrade' I did.
Code: Select allroot@debian:~# alsactl init
alsactl: init:1743: No soundcards found...
lspci (only audio)
Code: Select allroot@debian:~# lspci -v
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
Subsystem: Micro-Star International Co., Ltd. Device b002
[Code] ....
It seems I am missing a module/ kernel driver for the sound card
Note: I have testing in sources list but have stable with higher priority. So I should still be in Wheezy
View 5 Replies
View Related
Feb 7, 2011
Configure HDMI Sound on Acer N282.
No sound HDMI.
ALSA information is located at [url]
View 9 Replies
View Related
May 20, 2010
I have an HP 8510w laptop and I run ubuntu 10.04 out of an external harddrive.
I have no problem getting video over hdmi using the latest proprietary nvidia drivers however I cannot get sound through the HDMI cable.
I have read around without being able to find a solution.
Running "aplay -l" shows only my intel sound card and also there is no hdmi sound interface in the sound preferences (Only the normal output interface).
I am using the latest proprietary nvidia drivers (Believe it to be 1.95) and the graphics card is a Quadro FX 570.
how I can get sound out to work via the hdmi cable?
View 3 Replies
View Related
Nov 12, 2010
I have recently installed Ubuntu 10.10. Everything is working fine except I have no sound. When I use the command 'aplay -D hw:0,0 somefile.wav', I can get sound through headphones attached to the headphone jack. But I can't get any sound through the speakers. This is a dual boot desktop and the sound works fine under Windows, so no problems with hardware. The PC monitor is connected through a hdmi cable and I would need sound through the speakers. The output of alsa-info.sh is at
HTML Code:
<a href="http://www.alsa-project.org/db/?f=cb172534097c313b25836f77f2a40fef857102ba">alsa-info.sh output file.</a>
View 9 Replies
View Related
Jun 9, 2011
I recently purchased a new video card a GeForce 550 Ti, but I haven't been able to get sound working over HDMI.
I'm running the latest version of Ubuntu (11.04) and have installed the proprietary drivers through Additional Drivers.
Code:
The card is being picked up by alsa and I've configured Ubuntu to use HDMI in sound preferences:
aplay -l:
Code:
When I check alsamixer this is what I see:
ALSA reports that version 1.0.23 is installed, although I thought 11.04 came with version 1.0.24?
cat /proc/asound/version:
Code:
I've tried purging ALSA and reinstalling it but it didn't help. Is there anything I can do? Does anyone know if this card is supported by ALSA properly yet? I hate the thought of having to go to Windows to get this working
View 3 Replies
View Related
Aug 5, 2011
i have just recently switched back to Ubuntu and im trying to run my sound through my tv which is connected through my computer using a hdmi cable thats plugged into my EVGA Nvidia GeForce 210 video card ... i have my computer monitor set up as my main screen but i have my tv set up as separate X screen so i can drag over a movie and watch it on the big tv screen and still do things on my monitor ... when i was running windows i was able to get the sound to play through my tv just as i am tryin to do now... does anyone know how i can do this on Ubuntu 10.04
View 9 Replies
View Related
May 21, 2014
My microphone in skype is crackling on Debian Wheezy stable 7.5 ... It is OK on Windows so it is obviously not the hardware to blame.
I have tried already all the options I could find regarding this on the internet, by changing in /etc/pulse/daemon.conf:
Code: Select all resample-method = speex-float-10
OR
Code: Select all resample-method = speex-float-1
My output was also crackling but I solved it by changing:
in /etc/pulse/daemon.conf:
Code: Select all default-sample-rate = 48000
flat-volumes = no
in /etc/pulse/default.pa:
Code: Select allload-module module-udev-detect tsched=0
I also tried starting skype with
Code: Select all PULSE_LATENCY_MSEC=30 skype
Without any success. Now the output is perfect, but the microphone in skype (haven't tested it elsewhere) is crackling.
View 4 Replies
View Related
Jan 4, 2010
I am having trouble getting sound over hdmi with my Nvidia MCP7A HDMI. The strange thing is that everything works fine in a Live disc, but once I do a fresh install of that Live disc I get no sound, even though my configuration is exactly the same (as far as I can tell). I've checked the little things like alsamixer volumes, aplay -l, etc etc. Everything looks good to me. I can reproduce on multiple TVs so its not the receiver. Video drivers are the same in both live version and installed. aplay -l detects my device. sound/pci/hda/patch_nvhdmi.c already has my correct vendor id in it. Perhaps the following info can figure out what my installed environment is lacking.
Live Disc Info
Hardware
View 2 Replies
View Related
Jan 23, 2010
I can't get HDMI sound reliably when using Ubuntu. The strange thing is, if I repeatedly reboot the computer, eventually the sound will work. This can take anything up to 10 reboots. Once working, it will keep on working as long as the machine is not rebooted or shut down. HDMI sound works fine under Windows.
aplay -l will only list the Intel (analogue and S/PDIF) hardware, not the Nvidia, even when it is working. Selecting between analogue and digital output under Sound Preferences has no effect on the HDMI either way.
View 2 Replies
View Related
May 22, 2010
Video is ok, but never any sound. I went through and made sure the HDMI is selected as the audio device and I upgraded to the latest driver binary.
HDMI sound works without the ATI proprietary driver installed, but the needed resolution is not available and the picture overlaps the edges on my 32" LCD. At least I know it is not a hardware issue. ALSA is loaded and selected as the sound manager, but the volume controls don't appear in the ALSA slider console.
I tested the cable and display on another computer. I am using a new Gigabyte GA-MA78LM-SH2, it is the integrated video.
View 3 Replies
View Related
Jul 14, 2010
I was hoping that upgrading to 10.04 would fix my problems with sound and HDMI but alas it doesn't. I have an HP dv7 that I wish connect via an HDMI cable to my HDTV and play things like Hulu, Boxee, etc. with the sound coming out of my home theater system. I know that the hardware is capable of doing this because I have Windows 7 installed in a dual boot and it has no problems with pumping sound down the HDMI channel.
I've upgraded to Alsa 1.0.23 freshly compiled. With 1.0.23 I see HDMI settings in Pulse Audio Volume Control. However if I start say VLC and play a video, check pavucontrol and make sure the Playback is set to the HDMI channel. I can hook up the HDMI cable and I can see the video playing - but no audio. I've been in and out of all kinds of things like alsamixer, gnome-alsamixer, sound preferences, etc. and I've toggled things on and off in an attempt to get HDMI sound working but nothing works.
In alsamixer if I hit f6 I see my 0 card as HDA Intel and my 1 card as NDA NVidia. If I select NVidia I see only S/PDIF, S/PDIF 1, S/PDIF 2, S/PDIF 3. I can only mute or unmute these. I've tried both - nothing works. Let me know what sort of output/info you need and I'll post it. Here's some info I've seen others post:
[Code]...
View 5 Replies
View Related
Aug 2, 2010
The computer is an ASUS g50v. I tried plugging it into my tv via the built in HDMI and now my sound won't work.
aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[code].....
I have double checked that alsamixer is not muted and have done a clean install of my drivers.
View 5 Replies
View Related
