Ubuntu Networking :: Install Wireless-tools From A Command Line Installation?
Jan 7, 2010
I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
I want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
I installed ubuntu 10.10 server from an usb stick. I do not have access to a wired connection and do not have a CD drive, so now I need to configure the wireless connection.for that I need to have wireless-tools which if i am not wrong are not installed by default so the question is: how can I install the wireless-tools package from an usb using only command line? note: I got internet access from another ubuntu-desktop PC so i can download any package needed, etc.
I'm hoping to find an existing Linux tool for measuring latency:
I'm trying to diagnose how much latency my OS and NIC card are adding to TCP latency in Linux. I looked at the following tools but all (at least at the surface level) measured bandwidth (Mbps/sec) rather than latency (nanoseconds for transmition of 1 packet of size x).
If I were to write a custom test, it would likely do the following:
Client:
Create a fake message of the specified length with some padding for an incrementing identifier. Open a TCP connection (with the right parameters like TCP_NODELAY, etc) Loop and send messages containing an incrementing identifier. Store the current system time (in nanos) associated with the identifier. Listen for responses, record the current time and record the latency of that identifier asynchronously Server Listen for a connection Echo back any message received
Assuming both boxes had the same setup (configs, cards, OS, CPU, etc), are relatively close to eachother in the network, and one knows roughly the network's latency contribution, one could get a rough estimate of the OS + NIC contribution and begin testing various configurations.
One could also get a more accurate picture of the latency by using a network sniffer and snooping on the lines between the two hosts, calculating the latency between the two sides for an ID, and then subtracting that from the internally measured latency.
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
How do I install Broadcom Wi-Fi on Arch Linux in command line mode on an Acer eMachines EM350?
I assume that Broadcom STA should be the driver used and my USB key the way to install it with the help of another PC, assuming that I can't use a RJ45 ethernet connection on LAN.
I am using Redhat cluster suite. I am trying to configure cluster on linux using command line tools. I have following queries. Please answer them as early as possible.
1.Can I add node in cluster without adding fence device using command line tool? If yes then how?
2.I want to add failover domain in cluster. How can I add it using command line tool?
3.I want to add resources in cluster. How can I add it using command line tool?
4.I want to define services in cluster. How can I define them using command line tool?
Does anyone know of any good command line audio editing tools? I would like one that can take an mp3 file and crop everything but the first 30 seconds or so (possibly decompressing those 30 seconds as well).
The download bar on my conky overlay (${downspeedgraph eth0}) seems to be maxed out constantly. This is when everything should be idle with no downloads happening in the background (at least non that I know about).Are there any command line tools that can tell me what process is using my ethernet port?
1) capturing an RDF formatted RSS feed as a file on my computer
2) converting the result to HTML using local command line tools
I've sorted 1) with wget? I've discovered xsltproc but I'm going round in circles. The master plan is to import my pinboard bookmarks into a static web site produced on my linux box using a handful of clever bash scripts.
I've spent a lot of time googling on this one, but could not really find anything that would convert HTML to images. Does anyone know if there are some command line tools that can do this? I need to convert simple HTML documents to images to be attached to Powerpoint presentations. Could firefox gecko be tapped into to do this without a GUI?
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
I am looking for free and well known fax command line tools for receiving and sending faxes I wan it to save receive faxes in pdf format with file name included with caller phone number and date of receive:
Quote: for example: 5566545544-2011-5-11.pdf and any other format that I want.
Without Gdm (The GUI Desktop running), or an Internet connection, how does One get pppd or wvdial to connect to a wireless broadband modem?I'm SURE this can be done with any modern Distro without additional downloads...but seem to be missing some crucial step...? I've been trying things like: (scrips for pppd and chat and ln {links} ttyACM0 to /dev/modem?) the modem is definitely on ttyACM0.
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
I've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
I wanted to run a little media server in my house, shared with my laptop only, so I could free up space on my laptop drive. I took one of my Linux boxes out of my render farm and loaded up a minimal install, command line only of Ubuntu Lucid from the mini ISO (32 bit). I had to plug in a lan cable to install, but I wanted to move my box back out to the "farm" that doesn't have wired access to my intranet.
After much research, trial and error, this is what worked for me. My wireless card uses an Atheros AR5001X+ chip, and it works with the desktop cd out of the box. I found the "just works" desktop install uses the ath5k driver that is now included in Lucid, but I'm not using a desktop or window manager. I haven't tried this on server version, if you do, let others know what you had to install to get it to work.
The things I do tell you about, I instruct you as if you are a newbie, however I have left out some things that users should know or be able to lookup easily, like if you want a static address instead of using dhcp. You may not need all of the steps or you may have to do more research and troubleshooting.
Find your wireless card (you may need to lookup what to do if it is not recognized at all)List all pci devices, only show network devices (-v verbose, -vv very verbose): >>lspci -vv | grep Network List all hardware (| less lets you pause at each page - arrow keys, page down/up to navigate, q to quit) >>lshw | less
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons) - I'm using Fedora 13 with KDE and Gnome some specs:
So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI
so far i have done this, but im not sure what to do after this
Nexus:~ # ifconfig wlan0 down Nexus:~ # ifconfig wlan0 up Nexus:~ # iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
I've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0 result is: wlan0 IEEE 802.11g ESSID:off/any Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
