i have just recently installed linux mint 9 with the KDE desktop, i am very happy about it... the problem i have encountered is setting up my 3 Mobile broadband USB dongle, other linux distros just recognised it instantly, but i cannot seem to install it in this one, could someone help me at all, please in a simple as possible description as i am still really new to linux, its a huawei dongle
View 2 RepliesIm running Pure:Dyne, an audio-centric distro, and so far I have not been able to get my usb modem to work. Im using a Huawei EC168 and my carrier is Alltel. Im totally new to Debian as well... Im doing this off of a live disc then I plan to install it once I know Ill be able to use my internet (its my only internet...) The card doesnt seem to be recognized other than as a storage drive or something, since its preloaded with the software for windows that comes with it.
View 5 Replies View RelatedI have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies View Relatedjust downloaded ubuntu 10.10 and burnt it to a bootable cd. did a clean install works fine. how do i get three prepaid mobile broadband to work???
View 4 Replies View RelatedI'm planning to buy a mobile dongle from 3 (this one: [URL]) but I don't want to tie myself down to a contract before I'm sure that it'll work.
I have a 64-bit computer with Ubuntu 10.10 and WINE installed, so if I was to buy it, how would I set it up?
1) does squeezy allows out of the box work for huwai dongle/ mobile broadband? (i never was able to configure mobile broadband in lenny thus i couldn't have kept lenny in my pc for more than 3 hours)
2) if i install squeezy (which status is 'testing' at the time being), do i need to reinstall squeezy once it becomes 'stable'?
3) any major difference between squeezy/debian and ubuntu?
I have just installed fedora12 from the Live CD couldn't get my mobile broadband to work on the Live CD, thought I would go ahead and install anyway and hoped for more success from the installation.
But nothing seems to work. I have tried just plugging it in and waiting for it to be registered, I have tried various manual set ups including enabling point to point encryption in the VPN manager and nothing seems to work at all.
The device is a Huawei K3520 USB modem.
Am I just doing something really stupid or is there some obscure method to get this working.
This is the only internet connection which i have available at the moment so anything I download will have to be done through Windows and copied across, i.e. I can't use YUM.
lsusb returns the following:
Not sure where the E620 comes from the model number on the case is k3520
Since my recent re-conversion into Ubuntu, I noticed Network-Manager now has mobile broadband support out of the box. Splendid!
I've been using my Huawei (Vodafone) modem since around two weeks, and so far it's been great, except for a little detail: sometimes, them modem simply won't work. I plug it in, "cd" drive (where the Vodafone Mobile Connect files are) shows up, but no "Vodafone" on Network-Manager.
I believe this has something to do with settings the modem may leave behind after each use, but I'm quite newb, so.
So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.
View 4 Replies View RelatedShould this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View Relatedtraffic driving removed.
View 1 Replies View RelatedI installed fedora 15 on my PC with AMD II X2 CPU with tata photon+ connection. Internet connection working good in Ubuntu 11.04 and windows 7 on same PC. But on fedora 15 with gnome 3 its not working with same configuration?
View 3 Replies View RelatedI am new to Linux .I am using ubuntu gnome desktop and i can connect to Internet via huawei e160 HSDPA usb stick easily.In Ubuntu network manager shows my broadband connection and by that i can connect.Few weeks back i install Slackware KDE desktop and still i couldn't connect to Internet.If some one know how to do it.
View 1 Replies View RelatedI have use my e169 mobile broadband dongle with Ubuntu without trouble.With Ubuntu network manager I can connect easily. Few days back I want to try for Kubuntu and I installed it through Ubuntu.Now I can log to either Ubuntu or Kubuntu.But when I connect to Kubuntu I cant connect to Internet with Kubuntu network manager.When I try to make a usb disk with kubuntu I realise that my usb dongle detected as a disk.How should I connect to Internet by using my usb dongle.
View 1 Replies View RelatedI am using Fedora 13. and had bought MTS Mblaze Mobile Broadband device. One installer comes with this device for Fedora, I have installed it.There were some issues while starting this application on fedora. But after seeing some threads for SELinux, it had been solved.Now, when I run this software, a window appears. If i clicked connect, it does show connecting and once connected automatically firefox opens.
But i am not able to access internet. After some time software shows device is in sleep mode due to inactivity. Network connectivity icon on launch panel on fedora shows network is connected.I had similar problem with Mandriva 10..
I have read that Ubuntu 9.10 does not support Huawei EC1260 mobile broadband dongles. As a result, I am using Ubuntu 9.04 still now. How will I use it in 9.10? Or,will it be supported in 10.04 or any other later version?
View 2 Replies View RelatedI have an Asus K50IJ laptop and everything works great, but now I'm moving house and need to switch to a mobile broadband dongle. From what I can tell the major providers here in the UK don't support Linux, so I'm hoping someone can help me with the question of mobile broadband on debian and what does and doesn't work by default. I'm happy to get my hands dirty and keep learning about linux and debian, but I'm definitely still a beginner in both. I couldn't find what I needed searching the man pages, wiki or forum, but point in me in the right direction if you think I've missed something useful. Ideally I'd like to use Virgin Mobile so I've asked them for specs on the dongle they supply and I'll post that info when I get it. Any help would really be appreciated as I rely on the internet pretty heavily.
View 2 Replies View RelatedIn the previous versions of Fedora, the check for updates when connected through mobile broadband appeared disabled, which made sense as I don't want updates when connected through a mobile phone but will wait until I'm connected through either ethernet or wifi.
Took my laptop into work on Friiday (9am Friday is the time concert tickets go onsale). Connected to mobile broadband using Fedora 14 and got the updates available icon, surely this shouldn't happen?
I'm looking at getting a Mobile Broadband dongle, has anyone got one of these working OK with Ubuntu and if so which network are you with.
View 7 Replies View RelatedI installed slackware on my laptop last night, :-) very happy. Can't wait to learn more about linux and even computers in general. I've already learnt heaps since entering the alternative operating system world. Anyways, i've got xfce up and running with slack now, created a new user 4 my self. And now i'd like to get some updates and stuff, but i need to use my mobile broadband. It's a telsta dongle If that changes the circumstances. How would i go about setting this up?
View 2 Replies View Related1st post in Debian Forums, just came from Arch...and segmentation fault and wine are the 2 special reasons for my return, it's a great distro but i miss the stable part of the deal.I'm a performance guy and i want to know what you use for mobile broadband connection (USB Pen) with exception of course of network manager, even with 8GB of RAM to deal with i want to keep my Debian Squeeze simple, better said:netcfg / wicd for networkpptp client for vpn........ for mobile broadband
View 4 Replies View RelatedIm able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies View RelatedI tried at Fedora 10, didn't work, and then Ubuntu 9.0.4, in the hope of it may work, my CDMA 1x Mobile broadband.( it works well under Win XP). and it didn't work.And then it comes the Fedora 11, still the same problem.
Seems Linux cannot recoginize my CMDA 1x Mobile Bbroadband, becuase the newwork manager doesn't pop up with messages of detecting a new hardware.
And when I run the desmeg:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
[Code]...
I'm completely lost. Thought i was'nt a newbie anymore, but obviously i am. I have a USB HSDPA modem ZTE MF628. Figured out how to change from USB CD device tot modem, but still cannot get it to work, Especially how to get it showing up in NetworkManager as a mobile broadband device. Some output (after usb_modeswitch):
Code:
$ lsusb
Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0ac8:c326 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 046d:c526 Logitech, Inc.
[Code]...
I am trying to connect to Internet via 3g Datacard in F15 and Its not getting connected.
View 2 Replies View Relatedi have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
View 4 Replies View RelatedJust loaded Ubuntu 9.10 on a Dell 5100, (XP finally got the bsod) I have verizon mobile broadband, all was very good until I realized I cannot connect wirelessly. The usb modem was not recognized, there is no indication of any wireless connection. There is no icon and nothing happens when the usb modem is plugged in. I have been working on this for hrs & hrs. I am a complete novice on Linux, but CompT1 A certified on PC's
View 9 Replies View RelatedI have an USB (Huawei 1751) modem for mobile broadband. I had it up and running in Ubuntu 9.10 but I had to clear the computer for various reasons. I have decided to only use LTS versions so for the reinstall I have used Ubuntu 8.04 LTS. I have downloaded and installed usb_modeswitch and can see that the modes is changed to the right value. After that I wanted to add a new mobile broadband connection in the network connections wizzard - but cannot see any settings for mobile broadband. I am sure it must be possible - but where is this function hidden in version 8.04 ?
View 3 Replies View RelatedI have just switched to Ubuntu from Win 7 RC. So far its been fun, learning to use terminal and all. But I have got a problem now I cannot find a solution to.
I am using 3 Mobile Broadband. The thing just worked - I plugged it in, created a new connection, modified config a little and was happily browsing.
However, it started acting out yesterday. When I boot the system with the modem plugged in, the USB stick is recignised and NetworkManager starts connecting (I have auto connect on). It then shows the "connected" message, and generally appears working fine.
On the other hand, I cannot open a single page in Firefox, it shows the default server not found page.
I used the approach Windows taught me: close, open, retry. I unmount the 3 Mobile Broadband drive, pull the modem out and reconnect it. NetworkManager then does it's job and this time everything works.
I nether had this problem in Win7 or Vista. It looks to me something goes wrong during the booting when the modem is plugged in.