Fedora Installation :: Couldn't Get My Mobile Broadband To Work On The Live CD
Mar 22, 2010
I have just installed fedora12 from the Live CD couldn't get my mobile broadband to work on the Live CD, thought I would go ahead and install anyway and hoped for more success from the installation.
But nothing seems to work. I have tried just plugging it in and waiting for it to be registered, I have tried various manual set ups including enabling point to point encryption in the VPN manager and nothing seems to work at all.
The device is a Huawei K3520 USB modem.
Am I just doing something really stupid or is there some obscure method to get this working.
This is the only internet connection which i have available at the moment so anything I download will have to be done through Windows and copied across, i.e. I can't use YUM.
lsusb returns the following:
Not sure where the E620 comes from the model number on the case is k3520
View 1 Replies
ADVERTISEMENT
Jun 30, 2009
I tried at Fedora 10, didn't work, and then Ubuntu 9.0.4, in the hope of it may work, my CDMA 1x Mobile broadband.( it works well under Win XP). and it didn't work.And then it comes the Fedora 11, still the same problem.
Seems Linux cannot recoginize my CMDA 1x Mobile Bbroadband, becuase the newwork manager doesn't pop up with messages of detecting a new hardware.
And when I run the desmeg:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
[Code]...
View 7 Replies
View Related
Sep 12, 2010
i have just recently installed linux mint 9 with the KDE desktop, i am very happy about it... the problem i have encountered is setting up my 3 Mobile broadband USB dongle, other linux distros just recognised it instantly, but i cannot seem to install it in this one, could someone help me at all, please in a simple as possible description as i am still really new to linux, its a huawei dongle
View 2 Replies
View Related
Mar 19, 2011
Im running Pure:Dyne, an audio-centric distro, and so far I have not been able to get my usb modem to work. Im using a Huawei EC168 and my carrier is Alltel. Im totally new to Debian as well... Im doing this off of a live disc then I plan to install it once I know Ill be able to use my internet (its my only internet...) The card doesnt seem to be recognized other than as a storage drive or something, since its preloaded with the software for windows that comes with it.
View 5 Replies
View Related
Sep 26, 2010
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies
View Related
Dec 14, 2010
just downloaded ubuntu 10.10 and burnt it to a bootable cd. did a clean install works fine. how do i get three prepaid mobile broadband to work???
View 4 Replies
View Related
Jan 12, 2011
I'm planning to buy a mobile dongle from 3 (this one: [URL]) but I don't want to tie myself down to a contract before I'm sure that it'll work.
I have a 64-bit computer with Ubuntu 10.10 and WINE installed, so if I was to buy it, how would I set it up?
View 2 Replies
View Related
May 29, 2010
1) does squeezy allows out of the box work for huwai dongle/ mobile broadband? (i never was able to configure mobile broadband in lenny thus i couldn't have kept lenny in my pc for more than 3 hours)
2) if i install squeezy (which status is 'testing' at the time being), do i need to reinstall squeezy once it becomes 'stable'?
3) any major difference between squeezy/debian and ubuntu?
View 14 Replies
View Related
Mar 10, 2010
Since my recent re-conversion into Ubuntu, I noticed Network-Manager now has mobile broadband support out of the box. Splendid!
I've been using my Huawei (Vodafone) modem since around two weeks, and so far it's been great, except for a little detail: sometimes, them modem simply won't work. I plug it in, "cd" drive (where the Vodafone Mobile Connect files are) shows up, but no "Vodafone" on Network-Manager.
I believe this has something to do with settings the modem may leave behind after each use, but I'm quite newb, so.
View 6 Replies
View Related
Jan 24, 2010
So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.
View 4 Replies
View Related
Aug 17, 2010
Should this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
View 6 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Nov 7, 2010
In the previous versions of Fedora, the check for updates when connected through mobile broadband appeared disabled, which made sense as I don't want updates when connected through a mobile phone but will wait until I'm connected through either ethernet or wifi.
Took my laptop into work on Friiday (9am Friday is the time concert tickets go onsale). Connected to mobile broadband using Fedora 14 and got the updates available icon, surely this shouldn't happen?
View 3 Replies
View Related
May 1, 2010
I have a new hard-drive and have installed squeeze using CD 1. As my mobile broadband is the only way I can connect to the internet, how do I get it working on a fresh install?
View 5 Replies
View Related
May 1, 2009
Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies
View Related
Dec 6, 2009
I'm completely lost. Thought i was'nt a newbie anymore, but obviously i am. I have a USB HSDPA modem ZTE MF628. Figured out how to change from USB CD device tot modem, but still cannot get it to work, Especially how to get it showing up in NetworkManager as a mobile broadband device. Some output (after usb_modeswitch):
Code:
$ lsusb
Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0ac8:c326 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 046d:c526 Logitech, Inc.
[Code]...
View 2 Replies
View Related
Aug 25, 2011
I am trying to connect to Internet via 3g Datacard in F15 and Its not getting connected.
View 2 Replies
View Related
Apr 17, 2010
How to install AT&T 885 Compass USB Modem on CentOS 5.4 ? And ho to configure the Centos 5.4 to connect to a wireless connection ?
View 5 Replies
View Related
May 30, 2011
I just purchased a mobile broadband connection from 3 in Denmark. I spent three hours following guides about usb-modeswitch and such. I just couldn't get it to work. Now, finally, I've come THIS far, but yet no internet.
Code:
daniel@daniel-laptop:~$ sudo usb_modeswitch
Looking for target devices ... No devices in target mode or class found Looking for default devices ... Found default devices (1) Accessing device 004 on bus 001 ... Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ... Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
[Code].....
View 3 Replies
View Related
Jun 28, 2011
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
View 2 Replies
View Related
May 8, 2010
I'm having problems with my mobile connection. This has been working fine for months, but in the past few days it has connected OK, I've been able to transfer data, but after 30s the connection closes. Setup is Acer AA1 with F12 connecting via bluetooth to Nokia 3110c on O2.
So to try and figure out what's happening I put the bluetooth dongle in my desktop PC, also running F12, made a connection and again it dropped out after 30s. Then I fired up windows on the AA1 and made a connection using the same dongle, this time it held up OK. This leads me to think that something has changed recently in F12 to upset it.
View 6 Replies
View Related
Oct 4, 2010
I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote: yum clean all; yum remove @preupgrade
$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE
It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?
View 1 Replies
View Related
Nov 4, 2010
This is not really a problem but I'd like to know if anything can be done about it.I run Fedora 12 (kernel 2.6.32.23-170.fc12.i686)/Gnome 2.28.2 on my Acer Aspire One netbook with a 1.6GHz Atom CPU and 1.5Gb RAM.I use a Huawei E160 mobile broadband modem to get online and this works OK; but (for example) I am on Airliners.net and looking at the trip reports, the photos are somewhat 'fuzzy'. Obviously the modem does not download too much data and you just have to do Shift+A to get it to 'reload' the pictures. After this they are crystal clear.However, is there a config setting that you could alter to do this automatically � e.g. download all the image data at once? I have looked in the Network Manager settings for my mobile broadband account and there is nothing in there.
View 2 Replies
View Related
Apr 3, 2011
In the last week I have noticed that sometimes my Mobile Broadband connection just goes off without me doing anything! I have credit on the dongle account, so it isn't that. I'm using fedora 14 on an acer aspire one netbook. Dongle is a Huawei E160 on o2 here in the UK Kernel is 2.6.35.11-83.i686.fc14
Sometimes unplugging and replugging the usb dongle works. Othertimes, I have to leave it out for several hours. It does seem to happen daily, though.
View 2 Replies
View Related
Sep 5, 2011
I few days ago I bought a mobile broadband, with dongle model Huawei e1820. I have no problem connecting to the internet. The settings in network manager are correct. But when I use the modem with high traffic for a while, like streaming, the speed gets slower and slower until finally the modem shuts down and restarts itself. After the modem restarts, it connects to the internet again, but now the speed is terrible. And if i continue using high traffic it will restart itself in a matter of minutes. But if I plug it out and don't use it for a while, the speed is back to "acceptable". For a while...
I'm using fedora 15, and have also tried it on Ubuntu Natty with the same result. Reinstalled usb_modeswitch. configured usb_modeswitch with all the guides on the web. No results.
View 1 Replies
View Related
Apr 17, 2011
I have discovered that my ISP drops down my mobile broadband connection specially at night. It is a very annoying fact because this type of net access is not cheap at all. I am using Fedora 14 newest core. I am able to configure Network Manager to automatically connect, but... this option does not solve the redialing issue.
Is there any way to set up redialing a dropped mobile broadband connection? A perl or python script, may be?
View 5 Replies
View Related
Oct 3, 2010
I have a Vodafone mobile broadband dongle for the United Kingdom. The installation software is for Windows and Macs only. In Windows it works fine. If I plug the dongle in the USB in Ubuntu then it is recognised but the installation does not start (quite understandably). So I tried using wine with the Windows executable. It starts off promisingly, then hangs. Some files are created along with desktop icons but the installation does not complete.
I have seen here (http://ubuntuforums.org/showthread.p...light=vodafone) the comment that Vodafone installation can be tricky. So, can any kind person tell me if it is possible to get Vodafone dongles working under 10.04? Also, are there any other UK broadband pay-as-you-go dongles that will work? I have seen in a very recent post that "3" seems to be plug-and-play?
View 5 Replies
View Related
Mar 11, 2009
I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.
I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).
Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...
View 14 Replies
View Related
Jun 14, 2009
I just installed Fedora 11 (excellent work by the Fedora team!) and got my Verizon mobile USB CDMA device working after some file modifications (easily found via searching).
I have to click the network icon in the task bar, and select "Auto Mobile Broadband (CDMA) Connection" to get it to connect though. It then shows up via "ifconfig" as ppp0 and all is good.
But how do I get this to auto-start when the system reboots? It doesn't show up in the network manager, and I'm not even sure how to use command-line to start up the CDMA connection! I only can do it via clicking that icon.
View 2 Replies
View Related
Nov 22, 2009
My connection is much slower on linux than windows (I'm dualbooting so its easy to test). On speedtest.net I get 0.30Mb/s at most on linux but about 2Mb/s on windows.Torrents does not seem to be affected thou. I've got speeds up to about 150kB/s on Fedora.I'm running a fresh install of Fedora 12 64 bit.
View 4 Replies
View Related
