I just did a fresh Debian instal & upgraded to Sid. I had the repositories set to get the codecs & audio & video was OK but somewhere along the line of my system set up (adding software) I lost the ability to play videos. I must have nuked a library or something I needed but I am not sure what. Totem just shows lines and plays sound.
I checked & I have ffmpeg , w64codecs and libdvdcss2 which was what I thought I needed.
Is it normal that you can't watch YouTube videos after a fresh install? It comes with something called GNU Gnash but it doesn't work at all in Iceweasel.
Recently, I did a netinst Debian install (on a C554US compaq presario), and while the net worked fine during install, I didn't seem to have a network connection (I use dhcp, mind you) or even an eth0 set up. I've used Debian before, but it was awhile back and I can't remember it all that well, but I DO remember having had net back then (previous version). I'm using Debian Testing, if that helps explain what might be wrong, and I can't help but feel it is my own mistake which caused it.
After successfully installing Debian 5.0 stable from a CD, I noticed that there wasn't any sound. I unmuted the volume in Debian itself and there still wasn't any sound! I ran alsaconf and it came up as a VIA VT8233/A/8 sound card.
I just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main [URL]
Sound Card (1st one / second is built in audio on a video card) joe@Tux-Box:~$ lspci | grep -i audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1) Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer Cannot open mixer: No such file or directory When I try to open sound applet in pannel -> No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards --- no soundcards ---
- The user is part of the audio group. - I was playing around with run levels and if I ctl -alt F2 log in as user su - password init 5 hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel. id:5:initdefault: # was 2 above at install - sound came on at 5
when i run dpkg-reconfigure locales and the gui comes up its mostly strange characters like in the picture.URL...Its like that on every gui im opening.its an vps im ssh'ing to. So my first guess was that it was an ssh client error but i cant change anything in the client,im using tunnelier.
I installed Jessie day before yesterday on a freshly formatted partition. After a random time, it hangs. If I am playing music at the time, the music continues for a few more seconds _after_ the mouse and keyboard become unresponsive, if that is useful.
Sine I did not understand how to pick the desktop during the installation, I installed Gnome. Afterwards, I installed KDE. Now I have a lot of Gnome stuff around I don't really need. But they are in principle compatible, right?
This morning, the hang was almost immediate after logging on. Only Iceweasl and Amarok and a Konsole were running. I attempted to start Icedove, when everything hung.
Here is the relevant part of the syslog.
Dec 8 07:41:38 jon-desktop rsyslogd: [origin software="rsyslogd" swVersion="8.4.2" x-pid="775" x-info="http://www.rsyslog.com"] rsyslogd was HUPed ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^
After logging into a fresh Debian 5.0 (lenny) install from a VPS (virtual private server) provider, I run 'apt-get update' and then 'apt-get upgrade' in attempt to get all the security updates, assuming that's what said commands do. Along the way exim (exim4) and possibly other programs (not confirmed) gets installed and is setup to run on bootup...despite it not being installed previously. Why is this? I would expect that either 1) previously uninstalled pkgs are not installed with the 'upgrade," or 2) if 'upgrade' essentially performing a "install everything that's not already installed" maneuver, I wonder why it's not installing a LOT more packages (then just the view I see installed on my system during the 'upgrade.')
Separately: can someone confirm an 'apt-get update' followed by apt-get upgrade' on a fresh Debian 5.0 install system will basically upgrade to 5.0.8 ("current rev level" for lenny)?
I have a new hard-drive and have installed squeeze using CD 1. As my mobile broadband is the only way I can connect to the internet, how do I get it working on a fresh install?
I just downloaded the Debian (Squeeze) businesscard 'netinst' ISO and every time I attempted to run an install, I keep getting the following error:http://yfrog.com/ngdeberrorp
trying to get wireless usb's to work with a fresh install of Squeeze and I'm having no luck!one is the rt28070 (Linksys) and the other one is a D-Link DWL-132 I'm at my wits end; trying to get this working for a friend and its driving me bananas!!
I did a 'netinst' today and de-selected every available option when I got to the 'software selection' screen (even 'Standard System & 'Desktop Environment') however after a fresh install, I noticed what seemed to me like useless / unnecessary system user accounts:
- news - games - www-data (obviously no Apache is installed)
I was wondering if there was a way to avoid this from a minimal install?
I'll start a fresh installation of a debian stable server and I would like to use LVM on this. So, I started to read lots of documents about LVM and found different flavors on partitioning with it. I'm thinking in a partition schema which might use LVM for those mount points that tends to grow in time, for instance:
I have an HDMI connected monitor with speakers but I don't get any sound after a fresh install. My computer ain't nothing fancy, my specifications can be found in my current board signature.
I have zero experience configuring devices on Linux. It's rather depressing not being able to listen to music.
i just installed debian after about 2 weeks of using ubuntu afterriend suggested switching, and it's not detecting my wireless card in the network settings. i'm new at linux so try to keep it simple if you can please,i read the sticky about this and here's the info it said i should provide
ispci -knn Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Kernel driver in use: agpgart-intel
I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error: Code: startpar: service(s) returned failure: udev...failure!!! I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else. Here is a Screenshot.
I have a fresh install of Jessie, and am having issues with debconf.
I have been trying to change to mdm from the default lightdm display manager. I have downloaded and installed mdm (apt-get install mdm) but when I run dpkg-reconfigure mdm nothing happens. As I understand it, I should get a menu that lets me choose which display manager to use.
I also installed lirc so I could get my IR remote working again, but when I run dpkg-reconfigure lirc nothing happens. I am supposed to get a menu with various options to choose from.
I have tried dpkg-reconfigure debconf and this gives me the menu with different options to choose, like it should when trying dpkg-reconfigure lirc or dpkg-reconfigure mdm. I tried using dpkg-reconfigure debconf to choose different settings, such as gnome, or editor, but they don't work either.
I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.
I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.
However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.
- the computer stopped working at all... nor bios access. - I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual. - I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup... - I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there. - I have found info in Internet regarding this issue, but all I find is "windows related" - Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it" - But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive... - Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again. - I chose to have 1 partition in full disk.
Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.
I've installed a fresh Debian amd64 DVD version on my small HP Compaq 6537s / AMD Athlon X2 / 64. Everything went fine, I rebooted, the graphical login screen appeared, so I thought I will be able at last to run Debian on a computer ...
But then after login, the login Window disappeared, the "Debian" logo too, and... that's all folks! A nice blank screen. But the mouse is still perfectly drawn, so it's kind of weird.
Here's what tells me "uname -a" :
Linux olivierdebian 2.6.26-2-amd64 #1 SMP Sun Nov 21 09:17:22 UTC 2010 x86_64 GNU/Linux
If I go to CTRL-ALT-F1, i login as root and I do a "/etc/init.d/gdm restart", I have the login screen back and this is once again the same scenario: login => ok => blank screen with mouse properly drawn and the Debian background color still there.
I have downloaded the latest testing image today (debian-testing-amd64-kde-CD-1.iso), install went just fine.
On boot, I get as far as the KDE login screen, where my user and password are seemingly accepted. Seemingly, as after this point, the screen is a complete mess. This 'mess' differs between attempts: it could be full of black and white squares, themselves made up of noise pixels; once it was like a normal screen after it had been through a blender, i.e. bits of the DE but awfully mixed up. (My judgement would be that the video pointers is set to point at the wrong part of memory... or is that my old-school point of view getting in the way? Whichever, it provides you with an idea of what it looks like.)
Running on an Nvidia GTS250 card, with two monitors (2 x DVI).
I have not installed any NV propriety drivers, as this is the first boot(s).
There is no xorg.conf present on the system; and I cannot find anything obvious in xorg.log (but then, I wouldn't know what to look for).
I use grub legacy, from my existing PCLOS partition (though this should not be an issue as I get as far as the KDE login screen, pretty as please).
Regarding the install itself, I took the above mentioned testing image as a way to get Squeeze. I assume this was the right way to do this at current time.
I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error:
startpar: service(s) returned failure: udev...failure!
I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else.
since few days I have installed a fresh debian testing on my new laptop, I am using XFCE4 as DE, I noticed that when I use these themes: greybird, bluebird and albatross the GTK3 applications (mostly from gnome 3 stack) do not display correctly the application. I have another laptop with an older debian testing with XFCE4 and the GTK3 themes work properly. The only relevant difference between the old computer and the new one are the video driver, the older use radeonsi driver and newest the nvidia blob binary.
I just got done installing Debian Squeeze on a system..Everything seems to work where audio is concerned, except for audacious.I can get streaming music from vlc/totem as well as play music files (mp3, ogg, flac, ect.).I was wondering if anyone else experiences this problem..It should be noted that I have the Debian multimedia repository enabled as well.When running audacious from terminal and trying to open up an mp3 file I get this message:"madplug: open_audio failed: XMMS reverse compatibility output plugin."
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
Acer Aspire S7-391 laptop, 64 bit install Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda 0.999TB 0xfd linux raid autodetect partition 1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same 0.999TB 0xfd linux raid autodetect partition 1GB 0xfd linux raid autodetect
/dev/md0 RAID1 of /dev/sda1 and /dev/sdb1 marked as ext4, boot point /
/dev/md1 RAID1 of /dev/sda5 and /dev/sdb5 marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1 then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces (hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
