Debian :: Ethernet Not Connecting On Jessie System
Sep 29, 2015
I've been trying for a few hours to connect to the internet on my debian jessie system. I used the netinstall without installing a DE so I boot into the command line for the mean time.
I have had no luck connecting to the internet after trying to configure the network. I have followed the debian tutorial from the wiki and tried some youtube video tutorials. I just have an ethernet cable connected to my home network. I have tried both dhcp and a manual static setup using /etc/network/interfaces and checked the /etc/resolv.conf file. Ping doesn't work and i cant update or install anything on the system...
View 11 Replies
ADVERTISEMENT
Mar 18, 2011
I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
View 9 Replies
View Related
Oct 12, 2015
I'm trying to install zoneminder on my system (Debian 8 Jessie). I was trying to follow a guide on puccinellidigital, since I use nginx on my machine.
everything is OK, but I can't get the xinet to work
Code: Select allservice xinetd status
Code: Select all...
Oct 09 14:24:39 donnager xinetd[1102]: service/protocol combination not in /etc/services: zms/tcp
...
But if I check
Code: Select allcat /etc/services |grep zms
Code: Select allzms-inetd 85/tcp
# Zoneminder ZMS inetd-wrapper
View 1 Replies
View Related
Apr 5, 2016
I have an asus eee 1015px, which was running dualboot windows and wheezy with no problems (except the browsers seeming to take up a lot of CPU). Today having backed up everything, I wanted to upgrade to jessie. URL...
Everything seemed to be progressing fine, no strange messages, it took 1 hour for
Code: Select allapt-get upgrade
but maybe that's normal. However, then when I did
Code: Select allapt-get dist-upgrade
It froze at 17.30 with a weird screen. The sort of thing you never want to see on an install, a sad face and blocks instead of text.
pic: URL...
Then it moved on and gave a readout, which seemed pretty ominous
pic: URl...
It then moved and gave a readout, hanging again:
pic3: URl...
Now it seems to be in loop, moving on every 15 minutes or so but always ending up with the same screenful of text shown in the foto below, which ends with the last line reading like this:
Code: Select all[17798.587776] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
or later
Code: Select all[20209.229273] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
This pic shows the full screen: URL....
This is baffling for me I'm not very experienced with debian.
View 8 Replies
View Related
Sep 1, 2015
I recently upgraded my debian system from jessie to stretch. Before then, I was mostly using hibernation instead of shutting off the laptop, to allow myself to get back faster to work the next day. Since my upgrade, though, it is impossible for me to resume from hibernation: after the normal boot sequence and the passphrase to decrypt my lvm partition, when it has loaded the information from RAM the screen just stays with a blinking "_" (underscore) in the top left corner.
I have hibernate and uswsusp packages installed. I also installed tuxonice-userui package to do some tests with the hibernate-ram and hibernate-disk commands. While using hibernate-disk (hibernate-ram didn't work, because "s2ram: unknown machine"), my system hibernates correctly, and I saw that during resume it was correctly loading everything from swap and then going back to the "underscore screen", confirming that the resume problem was happening after loading data from swap.
I tried booting using the recovery kernel in grub. For a time it worked, but today I didn't get the chance to make it work. The only solution was for me to boot my kernel by adding the "noresume" option to it, thus forcing it to restart.
View 11 Replies
View Related
Feb 9, 2015
My goal ist to install Debian Jessie on a drive with a btrfs subvolume scheme. This is my first time using btrfs and also my first Jessie installation.
My experience is, that partman creates btrfs file systems but doesn´t support btrfs subvolumes (why not?).
I successfully created btrfs subvolumes manually in a shell session during ("expert") installation and manually mounted them to the desired mount points in /target. Installation went through until grub2 installation, which failed.
Is there a best practice to install Debian (Jessie) on a btrfs file system with subvolumes? I want to use subvolumes for /, /home, /var/log and /var/lib/mysql.
View 3 Replies
View Related
Oct 28, 2015
I'm trying to create a persistent live Jessie system on my 8GB USB drive.
If that matters, I'm currently on an Arch Linux system, and I partly followed what's on the relative wiki (Pages Create a new MBR for a USB stick, Manually create a USB flash installation and Install Syslinux), plus a CrunchBang post explaining how to make a persistent live USB out of any Jessie-deriving distro (like their BunsenLabs Hydrogen).
The problem is, even if Debian boots up more than fine, the system isn't persistent at all.
Here's what I did (I know some passages are redundant, but still...):
Downloaded the Cinnamon flavor of Jessie via torrentErased the old MBR
Code: Select all# dd if=/dev/zero of=/dev/sdb bs=512 count=1 && syncCreated a 1.1G W95 FAT32 (LBA) active partition and used the remaining space on a Linux partitionFormatted the first to FAT32 and labelled it "Debian64". Formatted the second to ext4 and labelled it "persistence"
Code: Select all# mkfs.vfat -n Debian64 /dev/sdb1
# mkfs.ext4 /dev/sdb2 -L persistence
Mounted the first partition and the iso
[Code] ....
View 5 Replies
View Related
Feb 17, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on an IBM ThinkCentre. I have earlier had a dual boot Win 8 and Ubuntu 14.04 installed on the computer. When I installed Debian Jessie, I deleted the Ubuntu partitions and created new partitions from the free space. The install went fine and the Debian EFI/UEFI version of Grub was installed, but clearly at some other place, as when I boot the system, the old Ubuntu Grub pops up and of course cannot find the necessary files that it is looking for.
View 9 Replies
View Related
Dec 31, 2015
I recently upgrade my system from Jessie to Stretch, with no problem. A little later I upgrades Enlightenment from e17 to e20, and at some point shortly after that the second screen stopped working.
The nvidia X Server Settings correctly identifies both screens. But Enlightenment and xrandr does not see the second one at all. The second screen are on and the pointer moves correctly onto it, but no activity with left or right click. I have tried with the original xorg.conf, and generated a new one with nvidia-xconfig, but no difference. No obvious errors in any log-files either.
lisa@kitten:~$ sudo uname -a
Linux kitten 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux
View 1 Replies
View Related
May 1, 2014
I recently updated my Debian jessie system (for the first time in a few months). It broke my video driver (fortunately a dpkg-reconfigure fixed that) and my wireless driver (forget how I fixed that...), and my sound. ALSA still thinks I have an output device, I've set volumes all the way up in alsamixer.
In vlc and firefox, I can't hear anything using the default audio out (which I think is pulseaudio), nor can I hear anything if I ask them to use ALSA output directly. I've tried rebooting, killing/manually starting pulseaudio, etc to no avail.
I think it was either the kernel upgrade (went from 3.10 to 3.13) or a configuration option in some sound subsystem that broke. To be clear, sound was working perfectly before the upgrade. My machine is an Ivy Bridge-era Zenbook.
View 2 Replies
View Related
Aug 1, 2014
It has happened to my debian jessie system that the sound sometimes ceased to work, but after a quick review of alsamixer, pavucontrol it was easy to put everything back to normal. Not this time
The sound works as a charm with no headphones, but not with them, and I find them particularly useful for talking with people since the sound quality is way better...
I have alsa and pulseaudio installed on my system
uname -a
Linux device 3.14-2-amd64 #1 SMP Debian 3.14.13-2 (2014-07-24) x86_64 GNU/Linux
lspci -v| grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
In pavucontrol everything looks normal, and the output seems to be working...
View 2 Replies
View Related
Jul 16, 2015
I want connect from remmina to jessie on another system via xdmcp but only black screen happened.
my daemon.conf
Code: Select all[security]
DisallowTCP=false
[xdmcp]
Enable=true
[debug]
Enable = true
And gdm3 listen on udp/177. My syslog :
Code: Select allJul 16 10:17:46 office /usr/bin/dbus-launch[1455]: X Error of failed request: BadValue (integer parameter out of range for operation)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Major opcode of failed request: 140 (RANDR)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Minor opcode of failed request: 7 (RRSetScreenSize)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Value in failed request: 0x0
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Serial number of failed request: 150
[Code] ....
View 1 Replies
View Related
Dec 26, 2015
DEVICES:
atheros AR9485
realtek rtl8111/8168/8411
atheros-firmware and firmware-realtek are installed from repo.
ifconfig does not show the network devices:
ifconfig -a does show them, i ran the commands ifconfig eth1 up and ifconfig wlan1 up, which resulted in them showing when typing ifconfig, however both still are not working.
(ifconfig)Also eth1 is only showing an inet6 address not an inet/ipv4 address and wlan1 doesn't show any.
Checked the bios and noticed that network devices were enabled so i don't think its my bios.
Also ran a SystemRescueCd which i got from here: [URL] .... With this live cd, the networking was working.
Added:
Code: Select allauto eth1
iface eth1 inet dhcp
allow-hotplug eth1
Now I get a net address...
View 1 Replies
View Related
Mar 9, 2011
i have ubuntu 10.10 64b and for some reason last night the wired network autoeth01 suddenly will not connect to my router. it is a dual boot machine so i booted into windows and it is working fine in that OS.
I then had a look at the status on my laptop running ubuntu 10.10 32b and that was showing the same message "wired network autoeth01 disconnected" i cannot for the life of me figure this out. just before it was disconnected i had been copying 7gigs worth of data using samba from the 32b machine to the 64 bit machine.
i have tried deleting the wired entry and recreating it.
tried different cables
even changed the router
works with all windows machines connected to network
here is what comes up in lfconfig:
jason@ubuntu1:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
[Code].....
View 6 Replies
View Related
Apr 26, 2010
My computer needs the boot option "noapic". Unfortunately the Ethernet doesn't work. It does work when I use the boot options "noapic acpi=off" but the printer that is connected via a parallel port does not work. Also I have to push the power button the system is shutting down with this option.
Output of lspci:
Quote:
View 1 Replies
View Related
Jan 11, 2011
I have two computers, a laptop and a workstation, both running linux (Ubuntu and Fedora).For some reasons, it's handier for me to work from the laptop, accessing the workstation only from remote.At present, I have to connect to the workstation using a very complicated system that implies VPN + ssh passing through the internet. It works, but it would be far easier and faster if I could set up a direct connection between the two computers. Unfortunately, I can't use the ethernet ports or wi-fi (it's a long story why, but I really can't).I own a usb data transfer cable, but I don't know how to use it.
View 1 Replies
View Related
Apr 27, 2011
I've been doing some reading and I cannot work out why I'm having this problem. My 32-bit Ubuntu Server running 10.10 has a Realtek RTL8111 ethernet card which supports up to 1000mbps. However, when I run sudo ethtool eth0 I get:
Code:
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
[Code]....
After running sudo ethtool -s 1000 to try and change speed to 1000mbps, the output is still the same as before. Why is this :S?
View 9 Replies
View Related
Dec 26, 2010
just recently I made the move back to Ubuntu from Windows. Upon re-installing I noticed a problem with me connecting to the internet. Previously on Windows I had updated my Ethernet Adapter driver, upon installing I would have to disable and re-enable the device to let my computer have access to the internet. My problem here is how would I go about fixing this on Ubuntu so I can have internet access on Ubuntu
View 1 Replies
View Related
Jan 17, 2011
The Wired Internet adapter isn't working with Ubuntu 10.10, and without this working, I can't get my updates for the Broadcom WLAN adapter. I have a Realtek RTL8101E/8102E PCI-Expredd Fast Ethernet controller. I have looked for solutions, but haven't found any relating to my problem.
To be specific: Ubuntu 10.10 is recognizing the Ethernet adapter as eth0. When I try to manually connect after inserting an Ethernet cable connected to the Internet, it tries for a couple of minutes before telling me the adapter's been disconnected. The connector lights remain the same on the port as they always were.
View 1 Replies
View Related
Jun 29, 2010
I have installed ubuntu 10.6.4 in my dell inspiron laptop but my ethernet card is not working when I connect my lan cable to it. But it is working well in windows vista. How to load drivers for it.
View 3 Replies
View Related
Jan 13, 2010
I tried to setup sharing to connect Ethernet and wireless. I want Ethernet connected to desktop A, and wireless connected to another laptop(B), with my laptop acting as an AP. I set the network settings in Firestarter: Internet for wireless, local network for Ethernet. I want to share Internet from laptop B over the network. Internet won't work from my laptop since it seems to use the wrong interface.(Since the desktop is sharing Internet, although not on Internet usually when connected via Ethernet. And of course DNS/Gateway IPs aren't set for wlan0 since it's acting as an AP.) SMB wouldn't work for desktop A and laptop B: laptop B could detect desktop, but reports error "Path not found".
View 2 Replies
View Related
Oct 11, 2010
I just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.
I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"
View 4 Replies
View Related
Jan 16, 2016
I'm not having the invisible mouse problem, I don't have a mouse at all. Nothing is selected when I attempt to use my touchpad no matter how much I try. I've been trying to fix this problem for three or four days including by installing alternative OSs (Ubuntu Gnome 15.10, Ubuntu 14.04, Ubuntu 15.10), but those OSs have trouble finding the boot drive and is generally a massive nightmare. I figured Debian's lack of mouse would likely be easier to fix and so here I am. I've searched Google relentlessly for days now, the Man pages are useless for my problem, and the only mouse related posts on the forum didn't fit my own issues.
I'm using a Toshiba Satellite C55D-B5102 AMD-64 with Debian 8.2 (Jessie) and none of the operating options like Cinnamon selected at install.
View 14 Replies
View Related
May 17, 2015
How do you disable startx in Jessie when it boots up? In Wheezy I just had to disable the gdm3 service. I also tried a few settings in grub, but it still starts.
View 7 Replies
View Related
May 19, 2015
I've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
View 0 Replies
View Related
Jul 4, 2015
Is there any shortcut to move to desktop ? On debian wheezy there was "CTRL+ALT+D" .
View 3 Replies
View Related
Jul 26, 2015
The grub boot loader offers in options to boot with sysv instead of systemd. The problem is that it seems to fail and fallback to systemd. Let's have a look on my dmesg :
Code: Select allroot@PCALAIN:~# dmesg | grep sysv
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=6740d56f-604c-4920-8c64-868e23976be4 ro rootflags=subvol=__active/root init=/lib/sysvinit/init
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=6740d56f-604c-4920-8c64-868e23976be4 ro rootflags=subvol=__active/root init=/lib/sysvinit/init
[code]...
So, how to successfully boot with SYSV ? Of course, the package sysvinit is installed on my system.
First, I have done a snapshot. Nevermind, is the following safe and the correct way to go back to SYSV :
Code: Select allapt-get purge systemd sysvinit
apt-get install sysvinit systemd-shim
Is it necessary to purge and reinstall sysvinit in order to guarranty configuration updates or on the contrary, will I break my system if it has none of systemd nor sysv ?
View 3 Replies
View Related
Aug 22, 2015
I just upgraded to Jessie and my laptop, a vostro 1710, is overheating.
Code: Select allalexis1@debian:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +62.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +61.0°C (high = +105.0°C, crit = +105.0°C)
[Code] ....
I tried to follow what is indicated here : [URL] ....
What I have done :
Code: Select all $ sudo apt-get build-dep i8kutils
$ apt-get source i8kutils
$ tar xvf i8kutils_1.41.tar.xz
$ cd i8kutils-1.41/
I am on a 32-bits system so after
Code: Select all $gcc -g -O2 -Wall -I. -o smm smm.c
then
Code: Select all $sudo ./smm 30a3
returns
Code: Select alleax=000030a3 ebx=00000000 ecx=00000000 edx=00000000 esi=00000000 edi=00000000
eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 esi=00000000 edi=00000000 0
Finally when I type
Code: Select all i8kfan 2 2
I get
Code: Select all -1 2
i.e. my fans start and then suddenly stop !
View 9 Replies
View Related
Oct 9, 2015
I'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.
View 4 Replies
View Related
Feb 23, 2016
I keep most of my files on my server, but fiddle with them using NFS from one or another of my laptops - so they all have static IPs assigned by my router. If I want extra speed I plug in an Ethernet cable. My old DI524 wireless G router seems quite happy to have two MAC addresses (Ethernet and wireless) assigned to the same static IP, so long as I don't try using both simultaneously. However three Wireless N routers I've tried won't allow this, nor will dd-wrt.
I really don't want to have to set up every laptop as two separate hosts on my network. 'orrible complications.
Best solution I can think of is to get the Ethernet card to spoof the wireless MAC address with e.g. macchanger, as per this excellent page here: [URL] ....
I don't mind running a script manually to do that on each occasion.
This works perfectly on my old R50 Thinkpad running Debian Squeeze, but on my R60 (running Wheezy) and T400 (running Jessie), macchanger works initially, BUT as soon as I hit 'enable networking' in the Network Manager applet, the ethernet card reverts to its original setting. So of course then my router allocates a random IP and so NFS won't work.
Exactly the same goes for the iproute method 'ip link set dev eth0 address [fakemac]' - ifconfig shows it's worked, but it reverts as soon as NetworkManager goes back up.
I don't know where Network Manager (if it is that) is getting the Ethernet card's original MAC from, it seems to be listed in /etc/udev/rules.d/70-persistent-net.rules, so on the T400 (Jessie) I've even tried creating a file in /etc/udev/rules.d/75-mac-spoof.rules along the lines suggested in that archlinux page I mentioned -
ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="[original MAC]", RUN+="usr/bin/ip link set dev %k address [fake MAC]"
but it seems to have no effect.
Short of reverting to Debian Squeeze on all my laptops, I don't know what else to do. Or getting into my router and reassigning the IP / MAC address by hand every time (!).
(If there's a better way to swapping easily from wireless to Ethernet when required, I'd like to know.)
View 5 Replies
View Related
