Debian :: Diagnose System Freezing Up On Slackware?
Apr 12, 2010
i recently switched from slackware to debian because my laptop kept freezing up on slackware, and now it's doing the same on debian on slackware i would get this error in syslog: "hpet: compare register readback failed" at the exact time of lockup, which would leave me with a blinking capslock led indicator, and a completely frozen system (not even magic sysreq sequence would do anything) now on debian, same symptoms only there's nothing in syslog, and no blinking capslock led hardware is: i7 720q intel pm55 chipset nvidia gt 240m laptop model is lenovo ideapad y550p this will occur both in X and at the console i am using my own kernel as the default kernel doesn't support my ethernet adapter i have tried disabling hpet at boot, but there was no difference i have tried the patch posted here
View 5 Replies
ADVERTISEMENT
Oct 31, 2015
I have been working with Linux for some time now and moved from "crash-dummy fedora" to LinuxMint and now I'm on Debian 8.I ... The system is freezing and the only way to get it out of freeze is to kill tty7, I log into tty2 as root(which can startx) and kill tty7 via pid...
At first I thought it might be that I have 10 virtual NICs on 1 physical NIC, but after removing them it still freezes after a few minutes of running. Now I am wondering if double mounting/bind causes issues,
Example: drive2 is mounted to profile2/MyStuff, but I also "mount -o bind" a folder inside profile2/ MyStuff/.opera to profile2/.opera..
This is what I mean by double mounting. Does double mounting cause freezing ?Because I have not double mounted, and it hasn't froze yet. and to be honest, I am double mounting/binding several config folders like .mozilla etc...Drives are SSDs, and I created a complete other drive with LinuxMint and it froze the same way after mounts.
View 11 Replies
View Related
Nov 15, 2010
How does the 'testing' version of Debian stabilize? I mean, the updates from upstream are very frequent, so if the Debian maintainers upgrade a package till the very end (for e.g if they just upgrade to 2.6.36), when will they get time to test it (so as to freeze it)?
View 7 Replies
View Related
Apr 17, 2011
I am running Ubuntu 10.10 (amd64) on an Intel Atom 525 motherboard. I have a 5-bay SATA enclosure connected to my system through a Syba SD-SATA2-2E2I PCI card (uses the SIL3124 chipset). Under small to moderate load (transfer speed: ~25 Mb/sec), this setup works perfectly. Under heavy load (transfer speed: ~40 - 70 Mb/sec), the system crashes. By crash I mean I loose SSH connectivity, I can't ping the system, etc. The only solution is a hard reset. Initially, I thought this was a SAMBA problem so I logged into the system and tried doing a copy directly from the SATA enclosure to the system disk (connected directly to the motherboard). After 100 GB copied (at ~75 Mb/sec), the system crashed. My question: I am fairly new to Linux and Ubuntu. How would I go about diagnosing this problem?
View 5 Replies
View Related
Dec 23, 2010
Where does one look in terms of diagnostics after a system lockup and hard reset? For example, one of my computers, running Fedora 14 i686, has taken to locking up quite a bit lately. My only way out is a hard reset. Now, once the thing is booted back up I'd like to try to figure out where the problem lies. Where do I look? Will any of the log files reveal anything relevant to me? If so, what sort of things would I be looking for. Keywords?
This same box also locked up when I had Fedora 14 x86_64 installed. I had read that there were some issues with the newer 64 bit kernels that were causing lockups and / or extremely high loads. This is why I switched back to the 32 bit version, 2 days ago to be exact. The box gets little use. It's a toy really and not my main "daily use" computer. It is, however, running folding@home. Maybe that's where the problem is. About 15 minutes ago I called home and had my wife reset the box, then I logged in from work and stopped the folding service. I'll have to see if it locks up without folding running. Folding was running on this box when I had the 64 bit version installed also.
View 3 Replies
View Related
Jun 28, 2010
I can't update, download packages, or even diagnose due to an elusive error.
If I try to update or check using terminal I get this:
I even tried to restart in recovery mode to check for broken packages and I got this error:
I usually find answers in the documentation but this time I'm really stumped. I am Running 64 bit Ubuntu 9.04.
View 9 Replies
View Related
May 30, 2011
I'm not really a beginner but i will post here, i think there is a simple issue here.
I set up a new cloud server (debain 6) at CloudSigma, it has a joomla site on it, prob gets about 2000 visitors a day
Yesterday i unleashed it on the world , it was all ok when i went to bed.
At about 5.20 or 5.30 it went down, i found this out from App First notification, shame i didnt see the email until this morning lol.
Anyway there is no logical explanation as to why this would happen, how to diagnose this.
View 2 Replies
View Related
Feb 14, 2011
I've got an LG CD/DVD player/writer in my desktop, and it's suddenly stopped working. No error messages at all, but it doesn't acknowledge any discs any more, whether they're CDs or DVDs or CDRWs or anything. How can I diagnose what's wrong? It's only 1.5 years old so I wouldn't expect it to be a hardware problem really, but I can't think of anything else. At first I thought I'd broken something with Squeeze, but I ran a live system from USB stick and it also can't read any discs at all. Also I tried a bootable DVD and couldn't get that to boot either, so I'm pretty confident it's not a software problem. It's always worked fine before and hasn't had any shocks or moves or anything (that I know of). The green light flashes when I close the drawer, just flashes a few times and then stops. There's nothing in /var/log/messages. Are there any tricks to figure out what might be wrong or is it looking like I need to buy a replacement drive?
View 4 Replies
View Related
Jun 26, 2011
I've been getting some system freezes when running blender on a new system (using about 1/2 my 8GB memory, AMD Phenom II x6 1090T+default AMD CPU cooler, ECS A880LM-M motherboard, Corsair 1333 DDR3, 2x4GB). PS voltages (measured off MOLEX plug) 12.05VDC and 5.2VDC. Tried BIOS resetting defaults. I'm trying to narrow down the problem with the MEMTEST v4.0. It gets through all tests fine until test #7 (block move) and starts throwing a ton of errors, and about 2/3 of the way through that test it says "unexpected interrupt, halting CPU0." All the listings say "28dbbd11" (this varies from run to run, except the 'Stack:' listing seems to count up from that number). I've tried unplugging one memory module and then swapping them as well as their positions. Same result always: block moves throw errors, followed by halting CPU0. To me this suggests the motherboard or the Phenom II. But I don't know how to test these. Can someone give the next step in diagnosis? I did find this link, but I'm not sure how it differentiates between my error and something specific to either the MOBO or CPU:
[code]....
View 9 Replies
View Related
Jan 10, 2010
I've been ignoring this problem for about a week but its getting on my last nerve. Dolphin keeps freezing for about 20 seconds when ever I try to move or open files sometimes, It will just sit there and then once it returns it will very quickly execute my command. It seems im not the only one having this issue [url]
I still can't seem to find a fix. I'm running the most recent current BTW
View 7 Replies
View Related
Feb 19, 2011
Two completely different slack 13.2 systems just started to lockup, no matter what gui I use. They had been running fine for months. Mouse and keyboard stop working, the only thing I can do is hit the reset button to reboot. The only things in common are they are both slack 13.2 and they were installed about the same time, but the graphics cards and cpus are different. Where should I start to troubleshoot this problem?
View 14 Replies
View Related
Jan 27, 2010
I installed Slackware 13 (full install) a few days ago and every thing is working well except KDE freezes (I'd say randomly but lately it seems as if it happens after I use a KDE program or component.) and nothing works except the mouse cursor, I have to use the power on/off to reset the computer. After a reboot and fsck checks the partition that was unmounted improperly I log in delete a few bad files (.serverauth.XXXX, socket-speeedy and tmp-speedy) I'm usually able to restart KDE using startx. Googling around I think it may be my on board Intel video, dmesg id's it as the Intel 830M Chipset. BTW, this box ran Mandrake 10.1 for the last 6-7 years without problem, for what's worth.
View 14 Replies
View Related
May 18, 2011
I recently ran into a problem with my install. I accidentally messed with the bottom panel in my KDE on my root account. This caused my desktop to freeze up. Every time I attempt to restart into my root, it loads, but is completely frozen. Is there some way I can overwrite my KDE config files without starting X server or from a standard user account?
View 6 Replies
View Related
Apr 24, 2010
I have a clean install of Kubuntu 9.10 running on ext4 partitions (root and home). Kernel: 2.6.31-20-generic-pae.Freezing is becoming a way of life! I first thought it was my main browser (Seamonkey) but freezes have occurred even when it's not open. It usually occurs when computer is left unattended for a while.I'm not sure if it's the desktop crashing, no ides how to check logs especially as I have to reboot to gain access.
Mouse and keyboard work fine, I can use ALT+F4 to close windows and ALT+F2 to restart. But programs freeze, KMenu won't open, Taskbar is frozen, no HD activity.Where do I go from here?9.10 seems OK on my laptop but that was a upgrade from 9.04 and I don't usually leave it open unattended for any periods of time. I did a clean install of 9.10 after an upgrade was having the same problems.
View 2 Replies
View Related
Aug 11, 2011
I installed KDE 4.7 (minimal desktop install) on my desktop computer, running Ubuntu 11.04, and every time I go to log in with the KDE Plasm Workspace, my computer all of a sudden freezes up after about a minute of working fine. My mouse slows down incredibly and eventually comes unresponsive to keyboard, power button, and mouse click input. The mouse can move, but it's movement isn't fluid, and it can only move a little bit. Can anyone help me? I have also had problems with KDE 4.7 on other computers as well, but this desktop I am using is almost brand new. :/
View 5 Replies
View Related
May 31, 2011
I just did a fresh install of Fedora 15 last weekend. Since then I haven't had any problems with it except of course a few bug reports every now and then.Today, out of the blue, my system start freezing, giving me no choice but to hard reboot.As a particularity when the system freezes I can still move the cursor on the screen but everything else seizes to respond.It happens every time within 10 minutes after reboot, and even sooner if I launch the internet browser (behaves the same with both Firefox and Epiphany) or if I open a video file.
View 12 Replies
View Related
Jan 30, 2010
GNOME system monitor is constantly freezing and not responding when i click on first tab 'System' Do somebody knows some workarounds for this issue? It's the same on freshly installed system and also on updated GNOME 2.28 from stable repository.Sometimes on second or third atempt it is working, but i cannot accept such an level of unstability and bugs, discovered on daily basis of testing openSUSE 11.2. There are much more very basic issues in this release which are normal for beta stage, but not for almost 3 moths old system...
View 2 Replies
View Related
Oct 11, 2010
I just installed ubuntu 9.10 alternate version, but the problem is it is freezing after sometime. mouse stops working, not keyboard activity nothing else.
View 7 Replies
View Related
Dec 20, 2010
I have a fresh install of CentOS 5.5 on small thin client system with a 80G HDDs, 1 GB ram [URL], I have run into an issue where the system just locks up and freezes and I can no longer access it, cant ping it, cant use webmin and cant view its web pages. The system seemed to be running fine unitl I left it to do some updates via webmin as it informed me there were 118 updates. I really only use the system as a LAN captive network server, and it is currently in the testing phase for this setup. The install went on with no issues and it ran fine, but now every so often within 12 hours it just locks up and I have to reboot. kdump shows no logs so I am finding hard to work out what is going on. but have installed it on 5 of my servers 4x ibm x335 and this . I intend to use the mini server for a captive portal system displaying advertising and promotions to wireless clients.
View 5 Replies
View Related
Sep 25, 2009
xine freezes completely and totem freezes when I resize video. Sounds like a library problem.
View 8 Replies
View Related
Jul 21, 2011
I've just installed F15 KDE Edition, and as the title tells, I need to keep pressing F2 and/or Enter to make the system go through the boot up process, otherwise it freezes as long as i keep it without my interference !! and then it takes relatively long time to start the GUI, and when I switch to the console (using ALT + CTRL + F3 for example) and try to write the login or the password, there seem to be some 'bouncing' effect, that if I'm to write the login 'root', I get something like 'rrooott' ... however, this doesn't happen in the GUI .....
I have a multiboot system, with Windows7 and Linux Mint (based on ubuntu 10.4) installed along side. While Windows7 doesn't have any problem with my hardware, Linux mint has also some issues that cause the performance of media players to degrade (sound and video tearing) and cause repeated freezes to some applications (a game actually, 'wesnoth') until I press a key or move the mouse.
I have AMD Athlon 7750 dual core 2.7 GHz system, with 3GB DDR2 800 Ram, and embedded ATI Radeon HD 3200 with about 512 shared memory.
one more thing, when I booted off the live image to run the install program, I booted into the video failsafe mode (not sure of the exact name, but I think you got it, no mode setting) and passed the option 'noapic', so I suppose this options are still passed whenever I boot mysystem, as I get the text version of the progress bar during startup, rather then the graphical fedora logo ( i.e no mode setting) ..
View 3 Replies
View Related
Sep 3, 2010
I have Intel DG31PR motherboard. But Yast - Hardware information lists it as D945GTP. How this can be corrected? My system is freezing often so trying to narrow down the problem.
View 4 Replies
View Related
Dec 5, 2010
Xubuntu 10.10.I need to turn off my screensaver as its freezing my system when it activates.I have tried to go into > settings > screensaver but it locks my system up as soon as the screensaver options page comes into view.I don't really need a screensaver so is there any way to turn it off via the terminal or any other method.
View 3 Replies
View Related
May 8, 2011
I'm using Ubuntu 11.04, Natty Narwhal, 64-bit. I've been using it since Alpha, and Firefox and xChat have always frozen my system. I update daily, so I know I'm on the newest updates, yet they still freeze my system. I've tried doing a total uninstall on both of them and reinstalled to the same freezes.
View 3 Replies
View Related
Jan 28, 2010
After migrating from openSUSE-11.1 to openSUSE-11.2 together with a few further online updates including a kernel upgrade to 2.6.31.8-0.1-desktop, my system started freezing a couple of times for two days.
I made up my mind googling for "linux freeze", found a hint saying, that 2.6.31.8 causes trouble, fell back to 2.6.31.5-0.1-desktop, and voila: the problem is gone. What a relief!
The following describes my system:
View 4 Replies
View Related
Jan 20, 2010
This is happening pretty often. when in ubuntu, usually while i'm browsing the web, my browser will go dim then a box will come up saying something along the lines of missing resources. the thing is, all my desktop icons will then turn to red x's and no text characters on any further boxes will show. when i restart it says grub error and takes one more restart to finally come on. i got fed up with it and switched over to windows 7 where my browser also froze and my computer froze up.
View 9 Replies
View Related
Nov 30, 2010
I have a bit of mystery regarding my system intermittently freezing. First off, the info. I using/running: Ubuntu 10.10, 64bit version (clean installation) Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (not overclocked) 6GB RAM Nvidia GTX260 Nvidia proprietary drivers 1TB Western Digital HD (32MB cache) Now, the problem: A while ago, I started experiencing intermittent system freezes that would last for 2 or 3 minutes and happen about once every 45 to 75 minutes.
The Gnome System Monitor (GSM) would show 100% CPU utilization, but top, htop, and conky only show about 11% usage. I pulled up the process list in GSM. However, I had issues, for the obvious reason, when bringing it up when the CPU was spiking. Even when I could, it only showed the usual suspects (Firefox, Deluge, Ktorrent, and Xorg) running the high single digits. This was backed up in top, htop, and conky. I also checked the RAM, but usage was down around 25%, with nothing in the swap.
I checked the messages log, but there was nothing there. Nor in dmesg. At least not that my limited Linux admin skills could find. The freeze just happened, so I've attached them in their entirety. I've come to suspect that Python is the cause. It happens most often when I have Ktorrent or Deluge going. I used to use Deluge, but moved to Ktorrent to test if Deluge itself was the problem. They're both written in python though, and both seem to cause the slowdown. It also happens when other python-based programs are running, such as the updater, but not as much or as bad. Things I've tried to fix the problem:
- Clean install (first time in over 18 months)
- Updated Nvidia driver by adding a repository
- Updated Deluge by adding a repository
- Enabled backports.
- Gave my PC the finger
This is driving me nuts. If it was just BT clients, I'd only run those at nights, but it's also parts of Ubuntu itself that relies on python, which I really think is the problem.
View 9 Replies
View Related
May 7, 2011
since installing 11.04 on a computer that was running 10.04 perfectly, the system hangs for a split second every 10 seconds or so. If you make little circles with the mouse pointer you will see it jump position when the computer hangs briefly. If you are listening to audio or watching video then this also hangs for the same very short length of time.
I had the exact same problem when I tired going to 10.10 and so had to go back to 10.04. I was hoping it may just be an issue with that version but it seems not. The computer is: 1.6GHz Intel Core Solo, 1GB Memory, the motherboard is a Jetway Mini ITX board with integrated Intel graphics. It has no problem running the 3D stuff in Unity (or any of the old gnome desktops). Changing to 2D or turning off desktop effects in 10.10 does nothing to solve the problem. 10.04 seems to be the last time Ubuntu worked properly with the computer.
View 1 Replies
View Related
Jun 25, 2011
Flash is causing severe problems on my slackware laptop. It happens pretty much only when I go on ..... and playback starts. Then the whole screen flickers and everything freeze. I have no mouse or keyboard (cursor is frozen) and I need to SSH to the machine to kill the process "plugin-containe" whatever it might be.
SO basically, is there anything to do to prevent such problems?
View 3 Replies
View Related
Jan 6, 2010
Ok, this just started happening with ubuntu 9.10.
When it first happened, I didnt know what to do so i accessed all my data, backed it up in a diff partition, reformated my drives and reinstalled a clean 9.10. But now, every now and then (i think its when i use frostwire and have other programs running) my ubuntu keeps freezing up, it becomes non-responsive to anything i do, so i have to do a hard shutdown, after which, when i reboot, it is not able to mount /home, so i run FSCK and it fixes it, but ive done this about 3 times now, its starting to get a bit annoying, i dont know if anyone else has this problem, or if its a known bug. Here are my specs:
Running: Ubuntu Karmic 9.10 64 bit
3 Sata HDD: 1 TB, 750 GB, 350 GB
4GB Ram
2 Nvidia 7900GS
with a Pentium core 2 duo @ 3.0GHz
View 5 Replies
View Related
