Debian Configuration :: Xen Install Killing Previous Pbo Update?
Dec 22, 2010
If I should have put this in the beginners forum, I'm new to Debian but not to linux having used Slackware for some years. My problem is a kernal thing I think so probably best posted here.
I'm trying Debian because of the belief that I can use the Edinburgh Speech Software easier for my project work, also I wanted to use xen if possible. Having installed Debian Lenny amd64, the sound wasn't working on the machine but after installing the bpo the sound worked. The next thing to do was to try to install xen. Following an install of xen, the sound no longer works in the xen image, though I can still boot into the bpo kernel and get sound alright. When I boot into any kernel now I get a kernel failure problem just after I have logged in (Your system had a kernel failure),, though I can still go on with things - this happens whichever kernel I try to use. However the kernel which is last in the list I have pasted below (Debian GNU/Linux, kernel 2.6.26-1-xen-amd64), will not run at all and complains so:
Error 13: Invalid or unsupported executable format
On boot with all kernels I also get the message: Failed to read splash image ((hd0,0)//grub/splash.xpm.gz), which I didn't get before the xen installation. Something I thought to try was to install lenny again, then install the xen parts and then after this install thb bpo upgrade, but I am thinking this will not particularly work - if I did this and ended up with a working bpo kernel/boot, would this boot option include the xen functionality or not?
[Code]...
View 1 Replies
ADVERTISEMENT
May 11, 2011
I'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies
View Related
Jun 13, 2010
I want to install (or compile myself) a previous kernel release (2.6.31.13). Where can I get it?
I mean a Debian Kernel with all your patches etc.
I'm using Debian Unstable. I just noticed that it was the quickest kernel (well, maybe for me only and my hardware).
View 3 Replies
View Related
Mar 16, 2011
It's taken a lot of work, but I have figured out over thecourse of many many fresh installs over the past few days that the kernel updatefrom the update manager in ununtu is breaking my system. This is both for the -22 and -27 updates.Is anyone else having problems with these and/or is there a fix?
View 9 Replies
View Related
Mar 10, 2011
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
View 1 Replies
View Related
Feb 18, 2011
Keep getting apt issues when trying to install packages. First it was tz stuff, now it's "Unpacking replacement libapr1..." forever. Don't ever recall having these issues with 10.10, how do I go about fixing this?sudo apt-get install subversion Preparing to replace libapr1 1.3.8-1build1 (using .../libapr1_1.3.8-1build1_i386.deb) Unpacking replacement libapr1 ...Just trying to install Subversion!
View 1 Replies
View Related
Feb 18, 2011
I have one previously compiled apache server from source. I would like to know is there any option to get previous configuration file from /etc/httpd/.
View 9 Replies
View Related
Jun 26, 2011
I am having a problem since upgrading from OPENSuSE 11.2 to 11.4 (both 64bit). The problem goes back to some issue with repositories which is what "forced" me into an 11.4 upgrade.
So, upon completing the install, and every time I run YAST to do updates, I get a message about this: "Error refreshing service ATI Repository (http://www.ati.com/suse/11.2):" How is it that this repository entry survived the upgrade install? Ok, forget that, how do I get rid of this when I can't get it to display in the list of repositories I have?
What is even worse, I don't have ATI drivers on this system (I had uninstalled them a year ago, pulled in the NVidea, esw, etc.) as I had put an NVidea adapter card in, in place of the ATI built in (on the MOBO). Somehow that dropping of the repository didn't work, and now I have this thing in limbo? ps. I can't figure out what string to search in my file system or I'd have deleted the sucker last night during the install manual reboot.
View 9 Replies
View Related
Aug 25, 2010
I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
View 14 Replies
View Related
Apr 13, 2011
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies
View Related
Jul 10, 2011
My probles consists in that i have no idea on how update the clamav. I downloaded it throu center of software. Butt when i try to upgrade it from the gui the upgrading bar reaches only 15% and desapears. I tried do type freshclam from root command line but it just writes that there is not such command. May be i use incorrectly the command line.
View 4 Replies
View Related
Sep 9, 2015
From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
View 4 Replies
View Related
Oct 22, 2015
I have Jessie in a VM. For some days I have been consistently getting errors with apt-get update, no matter if I use httpredir of ftp.us. These are the errors:
Code:
Select allErr http://ftp.us.debian.org jessie/updates/main amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/contrib amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/non-free amd64 Packages
[Code] ....
E: Some index files failed to download. They have been ignored, or old ones used instead.
And this is the syntax in my /etc/apt/sources.list
Code:
Select alldeb http://ftp.us.debian.org/debian/ jessie main non-free contrib
# deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib
deb http://ftp.us.debian.org/ jessie/updates main contrib non-free
# deb-src http://ftp.us.debian.org/ jessie/updates main contrib non-free
# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# Jessie Backports
deb http://http.debian.net/debian jessie-backports main contrib non-free
Mirrors cannot be down for so long, so what is going on?
View 7 Replies
View Related
May 3, 2016
Is it mandatory to reboot a public server after upgrading openssl? Or is it sufficient to restart the services?
View 2 Replies
View Related
Nov 1, 2010
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
View 2 Replies
View Related
Nov 18, 2010
I have a PC that have a new Ethernet card that is not yet supported by Debian/Lenny.I downloaded the latests driver from the manufacturer and after a make;make install everything works like a charm.My problem is that one day after a probable update, Debian overrided my new driver by an other one causing my Ethernet card to shut down.After an other make install, everything work again like it should..But how do i do to prevent Debian to update my driver ?
View 1 Replies
View Related
Dec 9, 2010
I have squeeze using the default setup with 5 seperate partitions on hard drive. All other updates are fine but it will not install the Linux-Image-2.6.32-5-amd64. I get message that not enough room. I think this is the kernal update. I use update manager. Is there a fix for this short of resizing the partition. This is a one computer/user setup. I had this problem on a previous install of stable and ignored it thinking that it was a glitch. That install was an experimental setup and I liked it but it didn't work on the internet very well so went to testing.
View 5 Replies
View Related
Dec 14, 2010
This morning's update
root@squeeze:/home/me# aptitude update
[Code].....
View 2 Replies
View Related
Dec 29, 2010
there seems to be a very important bug with php 5.2.6 (mb_send_mail, [URL]). Unfortunately this affects my php applications greatly. I am currently running debian 5.0.7, with the latest updates. how to upgrade my php.
View 1 Replies
View Related
Jan 23, 2011
I updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
View 3 Replies
View Related
Mar 20, 2011
About an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..
View 1 Replies
View Related
Jun 1, 2011
after a long time I did a little upgrading of the packages...
bind9-host:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-image-2.6.32-5-d64 (2.6.32-31.6.32-34squeeze1), dnsutils:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-headers-2.6.32-5-common:amd64 (2.6.32-31, 2.6.32-34squeeze1),
[code]...
View 2 Replies
View Related
May 2, 2010
as the tags suggest, i'd like a fresh install of linux using grub2, and partition my harddrive
View 3 Replies
View Related
Nov 25, 2014
When trying to do a system update, I'm facing following error:
Code: Select allroot@machine: apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
libdevmapper1.02.1
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
[Code] ....
No such file or directory of an older and unused kernel? What's wrong with my system?
More about my machine, which runs Debian 6:
Code: Select allroot@machine: uname -a
Linux machine 2.6.32-5-686 #1 SMP Sat Jul 12 22:59:16 UTC 2014 i686 GNU/Linux
Code: Select allroot@machine: cat /etc/apt/sources.list
deb http://http.debian.net/debian/ squeeze main contrib non-free
deb-src http://http.debian.net/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://http.debian.net/debian squeeze-lts main contrib non-free
deb-src http://http.debian.net/debian squeeze-lts main contrib non-free
View 14 Replies
View Related
Jan 4, 2016
Yesterday I installed some updates on my Jessie system (I don't remember if the kernel was also updated). After rebooting the system nothing happens after the "Loading intial ramdisk"-message. If I boot in recovery mode the boot stops at the message:
Code: Select allfb: switching to nouveaufb from simple
If I add "nouveau.modeset=0" temporary to the GRUB-entry for the recovery mode, it will boot up in the console-mode.
I was able to get an ethernet connection with "dhclient eth0" and removed the "xserver-xorg-video-nouveau" package. Then I installed it and the removed gnome-desktop again. Before removing it, aptitude said the following to the package:
Code: Select alli A xserver-xorg-video-nouveau
Now it only says:
Code: Select alli xserver-xorg-video-nouveau
But this didn't change my problem. I found a similar case in the internet, but there were no solutions for it: [URL] ....
The next thing I would do, is to install the proprietary nvidia-drivers, but since I have a GTX 960 video card, I would have to use experimental drivers. So I'm afraid to make it more worse trying to install this drivers.
Also I'm not sure if it really is a driver-specific of kernel-specific problem. My kernel is version 3.16.0-4-amd64.
View 10 Replies
View Related
May 17, 2010
I updated today and naturally removed the old nVidia driver, compiled it again after a reboot, and then rebooted again for good measure. I can log into KDE4, but all I get is a cursor and a solid black background. I deleted the ~/.kde, ~/.local, and quite a few other directories from my normal user account using the shell so KDE would reconfigure my settings when I logged in again, but it's the same problem. I went into ~/.kde/share/config/kwinrc and added the "Compositing" section with "Enabled=false" to rule out compositing. Now when I log into the system I get the default KDE4 wallpaper and a mouse cursor, but nothing else. I believe the latest update broke KDE4, or am I missing something? I have recreated my xorg.conf as well, and only set it to use the nVidia driver. So what can I do now?
View 3 Replies
View Related
Jun 11, 2010
I have the latest version of Debian installed on a Poweredge 1600SC. Everything is working ok, but the Adaptec AAR 2410sa PCI SATA card has started being a bit weird. I have a 1TB drive connected to it and noticed that occasionally it was unmounting the drive and messages appeared in the /var/log/messages like the following:
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Sense Key : Hardware Error [current]
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Add. Sense: Internal target failure
After a reboot everything would be fine. I did some research and heard that it could be the drive failing, so after running a disk check etc I connected up a new 1TB drive (was getting low anyway) to another SATA interface on the card and started trying to copy from one drive to another. Lo and behold, it happened on the new drive as well. Bugger.
I haven't had time to open it up and check the connections and will be doing this shortly, but thought I would check to see if it was using the best/newest driver, but am a bit stuck as to where to start. I've looked through some docs and help but can't really see how to update and check hardware drivers in debian.
lspci shows the following:
00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 01)
00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
[code]....
Is there a newer version of accraid I can use? Even if there isn't, how would I go about identifying which driver the card is using and installing an update?
View 1 Replies
View Related
Jun 30, 2010
So I just installed Debian Lenny on my PC (the install went fine). After installing, I went into aptitude and noticed that most of the packages available in the repository are out of date (python 2.5, GCC 4.3). System Update tells me that I am up to date, and when I tell synaptic/aptitude to mark all updatable packages, it does nothing. I have tried typing apt-get update as root aswell. Nothing worked.
I installed Debian with the first DVD from [URL]. During the installation, I told it to download anything that wasn't on the DVD. Shortly after installing, I had manually edited my /etc/apt/sources.list and commented out the CD line. Could any of this have messed up APT?
View 5 Replies
View Related
Jul 2, 2010
I've got Opera for Linux on my Debian Lenny system, installed by adding their repository to my APT config, and it works great. Just recently there was an update. When I downloaded it, it could not install because the signature could not be verified.
W: GPG error: [url] lenny Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY F9A2F76A9D1A0061
Why would that happen now when I already had the repository correctly setup in my apt files? I tried re-installing the key and that didn't change anything. Is there a problem with a public key server somewhere?
View 2 Replies
View Related
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
View Related
