Debian Configuration :: Wifi "disabled By State File" After Suspend
Mar 8, 2010
Using Squeeze, I wanted to get KMS + DRI2 and suspend/hibernate working with my radeon card using the Open source driver (my card: ATI Radeon Xpress 200M IGP (5955) PCIE (RC410) is no longer supported by the ATI/AMD proprietary driver). I know my card has problems with suspend/hibernate in User modesetting and from what I've read [URL] it has been solved for some only using KMS.
I followed this instructions by the Debian maintainer:[URL] Of course in reality the available version in experimental is now 6.12.191, and mesa 7.7 and libdrm-radeon1 are already in testing. Therefore I only had to get xserver-xorg-video-radeon from experimental and switch KMS on. It worked ok , except that when I tried to hibernate, it didn't even go into hibernate mode!...the screen went blank and the wireless led shut off, but the fan was running and the keyboard lights were on...
Aside from that I also got the following disquieting messages:
[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
radeon 0000:01:05.0: Wait MC idle timeout before updating MC
Failed to wait MC idle while programming pipes. Bad things might happen.
View 1 Replies
ADVERTISEMENT
Sep 5, 2015
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
View 4 Replies
View Related
Jan 10, 2011
I have just joined the Debian community, for the past 2 years I have been using Linux Mint (ubuntu), I am now using Linux Mint Debian 64. I have a Lenovo A700 ideacentre with a Broadcom 4313 WiFi card. I manage to get the card working, now I have a new problem. If I suspend the machine the WiFi will not connect on resume. Is there a simple command I can use to getting the connection restarted, or better yet a work around so it will restart on its own?
View 14 Replies
View Related
Jan 9, 2011
After fixing an issue with sleep mode, my WiFi is automatically disabled on my Ubuntu installation on boot while the switch is on. For some reason, it seems that Ubuntu has an issue communicating with my BIOS. As a fix to this problem: I disabled the C4 sleep state. My Ubuntu installation now boots up fine but the LED on the WiFi indicator glows orange, indicating that it's off; while in Windows it glows blue, indicating that it's on.
View 2 Replies
View Related
Jun 9, 2011
I am having a problem setting up an interface. the state does not seem to change to up and i don't even see any errors
#/etc/network/interfaces
# The Office LAN
auto bond0
iface bond0 inet static
[Code]....
View 1 Replies
View Related
Oct 2, 2015
I've just finished installing Jessie and everything went well, however when I boot into the installed system the WiFi option says that the hardware is disabled. My laptop is a Lenovo G50 which doesn't have a physical switch. the odd thing is that during installation I'm able to connect to my wifi with no problem!
View 8 Replies
View Related
Aug 2, 2011
i did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
View 3 Replies
View Related
Mar 18, 2010
I had been doing some removal of packages, and things went well, or so I thought. Now whenever I try and install any package using aptitude, some old state is lingering around and wants me to install packages that I do not want, and remove some packages that I am not sure about removing (did I actually select those to be removed??) I removed libvirt etc, and now it wants to come back? Also, like I mentioned, why remove those other four packages?
The following NEW packages will be installed:
aqemu gtkrsync libvirt-doc libvirt0 python-libvirt qemu qemu-kvm qemu-system qemu-user qemu-utils virt-top virt-viewer virtinst
The following packages will be removed:
dnsmasq-base{u} netcat-openbsd{u} python-gtk-vnc{u} python-vte{u}
0 packages upgraded, 13 newly installed, 4 to remove and 176 not upgraded.
Need to get 2,210kB/24.3MB of archives. After unpacking 72.7MB will be used.
Do you want to continue? [Y/n/?] ^C
Running squeeze, and enjoying it so far, apart from a broken out of the box synergy (compiled my own synergy-plus to fix that issue) and a buggy samba client.
View 3 Replies
View Related
Aug 9, 2011
I have a strange problem with the ACPI in my laptop, the problem start some days ago, I don't remember exactly the day.
The first symptom is with de Gnome Power Manager, only show me when I disconnect de AC power, but when connect it again the Power Manager icon disappear and the energy battery stay in the same value.
After search for a while, all the post I read talking about the /proc/acpi/battery directory, but this directory not exist on my laptop.
I have a laptop Lenovo G460. My OS is Squeeze. My Kernel is 2.6.38-bpo.2-amd64, because the 2.6.32 version of the kernel don't recognize well my audio card.
I can't attach the dmesg and the lsmod output because I receive a message "Sorry, the board attachment quota has been reached.", both file are compressed.
View 2 Replies
View Related
Jul 10, 2011
I have an USB keyboard attached to a laptop, and I can suspend the laptop via the sleep button on the keyboard. However, I can't wake the computer again by using either the connected USB mouse or the keyboard. How do I fix this? I am running Ubuntu Netbook Version 10.04.
View 5 Replies
View Related
Apr 26, 2011
I have a new clean install of 64bit current slackware on a machine which previously run 12.1 to 13.1. It had suspend to ram working quite reliable before, but now i get black screen (sometimes with nonresponding mouse cursor on it) at every second or third wake-up.
I found out that it is not a complete lockup - full access to kde desktop could be restored by hitting alt+sysrq+s followed by alt+sysrq+l several times. I wonder what is causing this? How to get it to wake up normally at once?
Edit: I've installed latest nvidia drivers (260.19.44) for GeForce 8500GT card - previous version (260.19.21) of drivers exhibited the same behaviour in my current install of slack.
View 2 Replies
View Related
Jul 22, 2015
Have been working most of the day on this usb full install (Jesiie xfce) trying to make it leaner/faster and trying to get rid of minor annoyances like "watchdog: watchdog0 is not shutting down" (couldn't btw), finally managed to disable "You have mail" by commenting out "session optional pam_ mail.so standard" in /etc/pam.d/login. Every little change registers in terms of seconds of boot time saved and how the system responds because, well, i'm booting from a usb 2 drive.Followed some suggestions from "Reduce Debian", removed cups-common, some foreign language locales and man pages. what i can safely do with systemctl.
View 14 Replies
View Related
Oct 28, 2015
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
View 7 Replies
View Related
Oct 4, 2010
Suspend worked before I completely reinstalled Testing from scratch. Now it seems to suspend OK, but when it tries to wake up it fails. Details here: [URL]
View 6 Replies
View Related
Jan 27, 2011
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 14 Replies
View Related
Sep 6, 2011
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
View 3 Replies
View Related
Jul 20, 2015
So I have this laptop with a busted battery, I'm trying to get it into some kind of headless server, media topbox hybrid.
First thing I want to do is being able to leave it shut (powered on) in the corner without having to interact with it directly.
I've setup ssh and vnc so to login remotely and do task, transfer files and etc.
However there is a little issue with the laptop lid down upon turning it on, it immediately goes into suspend when getting to the display manager, which is 'lightdm'.
I suppose this is the default setting for Xorg and as such my custom configs for KDE only kick in after I login.
Question is: I never seen configuration for default power management stuff being done in Xorg, is there some way to disable automatic suspension on lid down?
Another question is: After the KDE kicks in does it always replace power options? I have setup a xorg.conf file specifying dpms options but these don't seem to remain.
View 11 Replies
View Related
Nov 2, 2015
System is a Dell E7440, with Jessie, I recently upgraded to kernel 4.2.5 due to issues with wireless that are supposed to be fixed. (The same issue exists with jessie stock kernel 3.16 and BPO tough)
When I close the lid it often does not work and I get this in dmesg
Code: Select all[ 567.104335] pci_bus 0000:01: Allocating resources
[ 567.104349] pci_bus 0000:02: Allocating resources
[ 567.104415] pci_bus 0000:03: Allocating resources
[ 567.104428] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 567.105515] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 567.105540] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 567.105585] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[Code] ....
I suppose the i915 stuff is something I can ignore, However
Code: Select all[ 570.768020] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)
seems to be the issue.. I don't even know what device:40 is.
in ls -l it shows as
Code: Select all lrwxrwxrwx 1 root root 0 Nov 2 12:28 device:40 -> ../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT33C6:00/device:40
and
Code: Select all# cat /sys/bus/acpi/devices/device:40/path
\_SB_.PCI0.SDHC.WI01
The awkward thing is tough, software suspend by running "systemctl suspend" works perfectly and always.
Code: Select all [ 872.054627] PM: Syncing filesystems ... done.
[ 872.091506] PM: Preparing system for sleep (mem)
[ 872.092045] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 872.093377] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 872.094563] PM: Suspending system (mem)
[ 872.094595] Suspending console(s) (use no_console_suspend to debug)
[Code] ....
So despite the mysterious issue with acpi device 40, how is real lid close different from "systemctl suspend"? And can I simply workaround the issue by making such a suspend when the lid closes?
View 2 Replies
View Related
Jul 7, 2010
Just curious if this is possible. What I want to do is setup a rsync job to backup my laptop to my personal file server(same LAN), but I want it do do this at 3AM while I'm sleeping. However I always close my laptop lid when I'm done using it which puts the laptop into suspend mode since that's how I configured my power options in gnome. Since I don't want to leave my laptop powered up all the time, I was wondering if it is possible to have a cron job scheduled that will wake the laptop up(out of suspend mode) and run my script/backup job, all without opening the lid of the laptop, and then put it back into suspend mode when it's done. Is this possible, and is it as easy as scheduling a cron job or is there some other scripting/configuration/trickery that I need to do to accomplish this?
Also, my laptop's BIOS has the option to power on at a scheduled time if needed, but I'm not sure if that would work with it being suspended(hibernation is not an option since my entire HD is encrypted with LUKS and I would have to be present to enter the password to boot the system.).
View 7 Replies
View Related
Jun 4, 2011
I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?
View 3 Replies
View Related
Jul 12, 2011
Now Debian6 suspend and rstart is all ok!
Auto start a program with login is ok.
How to auto start a program with debian suspended and restart ?
Maybe with gdm3 or NIC....?
How can I catch a event to auto start my program?
View 1 Replies
View Related
Jul 25, 2011
I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.
The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.
The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the
service vboxdrv stop
rmmod vboxpci vboxnetadp vboxnetflt vboxdrv
lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.
View 3 Replies
View Related
Aug 27, 2011
I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.
Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.
My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.
I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.
View 2 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
Aug 18, 2015
My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...
If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...
Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...
I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...
Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...
This issue also only appears with the fglrx driver, open-source works well.
View 0 Replies
View Related
Oct 4, 2015
I'm trying to lower consumption of my server/HTPC. After wakeup from pm-suspend server/HTPC is ready to use in 1 or 2 seconds .For example if I suspend it while watching movie in KODI, after resume movie starts playing instantly. But some services (SSH and SAMBA) are not running. I thought it was network problem so I change configuration to static (not DHCP). SAMBA and SSH starts like 15 seconds after wakeup.
View 0 Replies
View Related
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Aug 7, 2011
Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:
$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
[code]....
View 2 Replies
View Related
Feb 22, 2016
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
View 0 Replies
View Related
Apr 11, 2010
It was working until a recent update. I have the icon in my system tray. Networkmanager is running. I have tried to reboot the computer and restart the network manager. All switches that could turn the network off is on. Every time I click on the icon in the system tray it tell me the networkmanager is disabled.
View 11 Replies
View Related
