My laptop has /dev/sda5 mounted on /. It has 10GiB and almost full. I formated Windows XP partition and it is now /dev/sda1 ext4 45GiB free space.When I mounted /dev/sda1 to root (/) directory, df commands showed still the original partition size. (81% used).
View 3 Repliesmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedI originally had an Ubuntu partition on my hard drive which occupied about half of it. I installed Windows 7 in the remaining unallocated space and I was planning on doing a grub update from a live cd afterwards. BUT when I looked at my partition table, the space where the ubuntu partition used to be is now unallocated space!
View 5 Replies View RelatedDebian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 81G 27G 50G 35% /
devtmpfs 16G 0 16G 0% /dev
tmpfs 16G 76K 16G 1% /dev/shm
tmpfs 16G 18M 16G 1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem Size Used Avail Use% Mounted on
/dev/dm-0 907G 6.6G 855G 1% /
udev 10M 0 10M 0% /dev
tmpfs 995M 9.2M 986M 1% /run
tmpfs 2.5G 76K 2.5G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 2.5G 0 2.5G 0% /sys/fs/cgroup
[code]...
I have deb6 installed in VMWARE ,i am posting my fstab config file
/dev/mapper/debian-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=0e7bc1e7-4f8c-4dee-a6e9-ae6d0669755e /boot ext2 defaults $
/dev/mapper/debian-home /home ext4 defaults 0 2
[code]....
I seem to have a major discrepancy between what df reports and what du reports. df tells me that I am using 20G, but I am only able to find 9.5G using du. What follows are the ls -l of root, a df of my system, and the du for every directory in root that is not a symbolic link, mnt, or proc. I would appreciate any suggestions on where to look for the remaining 10.5G that seems to have disappeared.
I am running under VM Player code...
I have a problem that Google didn't give me a workable solution so I'm posting my question here, hoping that someone has an idea.On a virtual server (VMWare) running Debian 5 I have a disk of 15Gb.
Can anyone tell me if this is possible? I've been playing around with GParted but unsuccessfully. The other option is to 'move' the whole server to a new (to create) virtual server that uses LVM. Any ideas?
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies View Relatedso I just installed Squeeze Alpha1 amd64, dual boot with MS Vista using Grub. Everything seemed fine, but I'm apparently missing about 40GB of space. It should be set up as so:
101GB NTFS /dev/sda1 - Vista
12GB NTFS /dev/sda2 - HP Recovery
45GB ext3 /dev/sda3 - / Debian squeeze
[code]...
I've got 4 identical 1 TB drives and would like to use them in a software RAID configuration on my home server. I'm running Debian Linux using 'mdadm' utility to manage the software RAID. I don't know how much I've read is fact or dated or even false so I decided I would ask here to get help from people who know more about this than I do. This is essentially just a file server machine to store all my data so being that I've got four identical SATA hard drives, I was thinking about doing RAID level 5. I guess I'll start here and ask if that is the recommended level of RAID. I think RAID level 5 will be fine for my general server usage. My second issue is partitioning the four individual drives to get maximum performance / space from them. Basically just asking here how would you or you recommend I partition the drives? I was thinking about doing three seperate partitions per drive:
/dev/sda1 = 4 GB (swap)/dev/sda2 = 1 GB (/boot)/dev/sda3 = 995 GB (/Now from that partition schema above, obviously all the types will be 'fd' for RAID and the partition for /boot is going to be bootable. My confusion is that I read Grub doesn't support booting from RAID 5 since Grub can't handle disk assembly. If /dev/sdx2 (sda2, sdb2, sdc2, sdd2) are partitioned for /boot (bootable), how would you guys configure this RAID to match up equally? I don't think I do a RAID level 1 on 4 identical partitions, right?
Command "sudo aptitude install oxygen-icon-theme" return following error:
dpkg: error processing /var/cache/apt/archives/oxygen-icon-theme_4%3a4.6.2-2_all.deb (--unpack):
unable to install new version of `/usr/share/icons/oxygen/22x22/apps/preferences-desktop-default-applications.png': No space left on device
[Code]....
As far as I can see oxygen-icon-theme unpacks only in /usr/share, beyond it I can think of only /tmp, /var or /var/tmp that it may use, all of which have plenty more than those ~40 MiB that it supposed to occupy unpacked. All btrfs filesystems were formatted with "-d single -m single". System is Debian Sid 64-bit with linux-image-3.0.0-rc5-amd64.
why dpkg may have trouble unpacking this package?
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View RelatedToday I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
I know that boot partition is possible to create within debian distribution that has grub 2.0, as I have done before with ubuntu. I have been trying many different options with my preseed file but it keeps taking the boot partition out of LVM and creating and extended partition too and then creates the LVM primary partition.
### Partitioning.
# you can specify a disk to partition. The device name can be given in either
# devfs or traditional non-devfs format. For example, to use the first disk
[code]....
Under GNU/Linux. I am talking about this. How do I know if a partition is misaligned?
View 14 Replies View RelatedI got a mistake during my installation on my server. I put the "/tmp" folder to the 2nd disk without thinking. My 2nd disk has only this folder and partition. How can I move the "/tmp" folder to my first disk in a different partition safely? It would be great if I won't destroy the server.
I would like to do the following:
1. move "/tmp" to disk 1 (sda). I will resize the "/home" partition(reduce) and put the "/tmp" there.
2. I will put "/backup" on the disk.
I would like to resize the /home partition but it is mounted and when umount is run, it errors with 'busy'.
System Configuration:
I installed jessie on a laptop with one SSD. I used guided partitioning and selected the whole drive with multiple partitions. The /home now takes up 420 GB. I would like to reduce that to 20 GB to make room for another partition.
What are the methods reduce this partition?
I have Debian and Virtual Box with another Debian. I have resized max size of vdi file with VBoxManage modifyhd but now I need to resize partition on virtual machine's system. I've downloaded GParted and I can run machine from this ISO as CD. Partition is encrypted on machine.Unfortunately GParted doesn't start with X so I have to use it in terminal. I can see partitions:
Code: Select allroot@debian:/# fdisk -l
Disk /dev/sda: 80 GiB, 85899345920 bytes, 167772610 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3914....
[code]....
So I though maybe I need to use this (URL...). I couldn't find similar tutorial about Debian or GParted but OK, it's just executing these commands, not modifying its source.list.But I cannot even do the update:
Code: Select allroot@debian:/# sudo apt-get update
Err: http://free.nchc.org.tw/debian sid InRelease
Temporary failure resolving 'free.nchc.org.tw'
Err2: http://free.nchc.org.tw/drbl-core drbl InRelease
Temporary failure resolving 'free.nchc.org.tw'
Reading package lists... Done
W: Failed to fetch http://free.nchc.org.tw/debian/dists/sid/InRelease Teporary failure resolving 'free.nchc.org.tw'
W: Failed to fetch http://free.nchc.org.tw/drbl-core/dists/drbl/InRelease Temporary failure resolving 'free.nchc.org.tw'
W: Some index files failed to download. They have been ignored, or old ones used instead.
So I check my internet connection. VirtualBox has 'attached to NAT' and before I run out of space on virtual machine, Debian could access internet. So it's only something about this GParted. I have modified /etc/resolv.conf with vi (even vim is not available). And it has two valid nameservers. I haven't restarted anything, as I'm not sure if I need to, after modifying resolv.conf file.But even in that case I cannot ping anything from GParted:
Code: Select allroot@debian:/# ping www.google.com
ping: unknown host www.google.com
How can I access internet from GParted and resize encrypted partition?
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedIs there a way where I can take like 50GB from my home folder (I have 375 avail., but using only 22GB) and put it to the root partition? Twice now my system has almost ran out of space on root, so luckly I was able to clear out old stuff so I don't have login issues after finding the hardway the first round lol. I just want to make sure I can login with out being forced back out because root don't have space to let me login.
View 11 Replies View RelatedI made a mistake in Gnome Disk utility tool. Instead of changing the options for a USB key, I changed the options of the root partition.
In Initial state, automatic options were desactivated. I just activated them. And after desactivacting them, I realized my mistake and switched back to "non automatic options".
By doing this, I suppose that defaults values were used since now, the system starts in command line mode and no more in graphic interface mode.
When I try the "startx" command, I get a "read-only" error.
With the command "sudo mount -o rw,remount /" the graphic interface is started.
Below is the configuration of the partition under the gnome disk utility tool :
"Mount at startup" is checked
"Show in user inteface" and "Require additional authorization to mount" are unchecked
Mount options : nosuid,nodev,nofail,x-gvfs-show
Mount point : /mnt/eb11d4d6-75db-XXXx-XXXx
Identify as : /dev/disk/by-uuid/eb11d4d6-75db-XXXx-XXXx
Filesystem type : auto
I do not want to change anything that could leat to a critical error. So what do you think I should do ?
concerning Linux, mdadm, and creating RAID Array's in Debian. I've done a lot of reading and research on RAID both on this board and elsewhere (The Linux Documentation Project's Software-RAID HOWTO is especially good), but I've run across something that no one seems to explain, and I'm not sure why. I'm instructed to create partitions on the drives I wish to add to my array. These partitions inevitably take up the whole disk, and are always have their system IDs set to "Linux raid autodetect". What I don't understand is why, after creating these partitions, some guides then go on to create an array (say a RAID5 one) with just the disks themselves as members, while others go on to create the RAID5 array with the previously created partitions as members. E.g.,
mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda /dev/sdb /dev/sdc /dev/sdd
vs.
mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
What's the advantage of using one over the other?
I have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
I have performed NFS installation on debian(as server) and fedora(as client). I made tests for 2 directories. The first one(from a debian home/somedir directory worked perfectly) but the second one not. This second directory is a hard disk partionned on fat32(vfat in my /etc/fstab file).
I have no error with both command :
Code:
exportfs
in debian and
Code:
mount -a
[Code].....
Currently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
i am following the installation process and its very unclear whether or not a dual boot will occur and how i can make a partition of the free space available from my windows partition etc....i dont want to go through the process and find myself losing all my data and my windows partition i also cant seem to select a partition less than 86% of the total capacity of hdd so im def sure they're not taking my dual boot desires into consideration.
View 1 Replies View RelatedI want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.
View 5 Replies View RelatedMy root filesystems flooded so I'm trying to move it to another (bigger) partition but I'm not sure of the best method. I just tried to use "dd if=/dev/sda1 of=/dev/sda6" to copy it but all that did was give me a brand new partition with no freespace available presumably because the filesystem is smaller than the partition. Is it possible to make the filesystem bigger?
View 8 Replies View Related