Debian :: Ext3-fs Unable To Load Using Custom Kernel?

Mar 11, 2010

I compiled a 2 custom kernels so far (many custom kernels just 2 that I have used) however, both of the kernels display an error message about EXT3-Fs and unable to load custom options even though all my partitions are ext4.

I have looked around and the only reason I find for those are that the file systems are corrupt beyond repair,However the problems always ments EXT3-fs is a ext3 file system problem and EXT4-fs is a ext4 file system poblem. Why is mine saying EXT3 and some times EXT2 when im using EXT4?

Custom Kernels

Debian 2.6.26.Something with RT patch
Debian 2.6.33 with Rt patch

View 5 Replies


ADVERTISEMENT

Server :: Mounting Ext3 File System As Ext2 On Slackware With Custom Build Kernel?

May 16, 2010

I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.

View 2 Replies View Related

Hardware :: Load Custom Kernel/install Additional Application On Iomega IConnect?

Feb 28, 2011

I know how to get root access in iConnect and ssh into it. I wanted to know whether we can install any applications on it using the package manager and what package manager it supports, like apt(debian based) or is it based on some other distribution.

View 2 Replies View Related

CentOS 5 :: EXT3-fs: Unable To Read Superblock And Kernel Panic

Aug 15, 2011

I got a CentOS server + KDE from a server (which I had no contact until now), he had 2 HD's one for the system and another for files.

I brought the HD system home to try to make it run on a virual machine (VMware) so I can do some testing before you put in practice.

But already converted the VMware HD to the system, it tries to start but it shows some errors and in a message "kernel panic - not syncing: attemped to kill init"

I think the drivers are correct, has edited the file "/ etc / modprobe.conf" edited these entries equal to another I installed CentOS on VMware.

alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptspi
ata_piix alias scsi_hostadapter2

Look at the picture attached the full error.

Link to large image
Link to large image

View 1 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

CentOS 5 :: Unable To Build Custom Kernel

Mar 18, 2010

I am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it:
1. Set Up an RPM Build Environment as its is explained in [URL]
2. Then follow the instructions in [URL]
3. When I try to install the kernel source rpm I get the following error:

[matias@Centos ~]$ rpm -i [URL
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root . . .
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read

View 8 Replies View Related

Debian Configuration :: Wicd: Custom Template Does NOT Load

Aug 13, 2011

My university has a secure wireless network that has the following specs: WPA2, 1st Authentication TTLS, 2nd Authentication PAP, Encryption CCMP or AES, Thawte_Premium_Server_CA certificate and username and password.

I have never gotten this to work with wicd. First of all, wicd does not have a default template for this configuration. This led me in the past to quickly install Network-Manager (on top of XFCE...). While this has worked for me just fine. Recently I found out that this functionality is possible in wicd by creating your own template. So I did and here it is!

name = WPA2 Enterprise TTLS
author = Andres Cimmarusti
version = 1

[code]....

I did everything outlined here: [URL] (that is I saved the file as wpa2-ttls and then added this entry to the active file in /etc/wicd/encryption/templates/).

Sadly wicd's gui does not load my template!, the logs show no errors!...it simply refuses to take it. I cannot see any mistake in the above... do you?Is this some debian bug perhaps?This is the most important issue for me, before accepting to use wicd instead of NM.

View 1 Replies View Related

Debian :: Custom Kernel Compiling.

Feb 23, 2010

I been trying all day to compile a kernel i downloaded from http://www.kernel.org/ (2.6.32.8 )Following this help thread viewtopic.php?t=4468.When i invoke make xconfig i'm just kinda lost at that point. Not really sure what to do, so i just save it as is and then compile/install.when i try to boot the kernel, a kernel panic happens saying it can't not mount the root partition.So i am sure i am missing a step with the xconfig part but not sure what.

View 5 Replies View Related

Ubuntu :: GDM Broken - Gdm-binary[230]: WARNING: Unable To Load File '/etc/gdm/custom.conf'. No Such File Or Directory

Sep 1, 2011

I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :

Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:

gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds

The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.

View 2 Replies View Related

Debian :: Modify The Source Of A Custom Kernel?

May 1, 2011

I'd like to create a custom squeeze kernel. Is it a really bad idea to edit to edit the kernel config file directly instead of using "make config", "make menuconfig" or "make gconfig"? My problem is I missing a search function, for example in "make menuconfig" and cannot find some entries.

View 2 Replies View Related

Debian Configuration :: Install Custom Kernel Image

Mar 11, 2016

I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is

Code:
Select all$ uname -r
3.18.12

But I'm not able to install this version from the standard repository.

Code:
Select all# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package)
nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64
linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support

Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?

View 5 Replies View Related

Debian Configuration :: Compile A Custom Xen Dom0 Kernel?

Apr 21, 2011

I would like to compile a custom xen dom0 kernel. I installed a Debian Squeeze with precompiled xen kernel, and it works fine, but i would like to compile a custom dom0 kernel from source. I tried install kernel source apt-get source linux-2.6 how can I patch this kernel source with xen? but i alway see only the domU kernel params.

View 3 Replies View Related

Debian Configuration :: Boot With Custom Kernel Automatically?

May 19, 2011

I have squeeze and I've created my own custum kernel. Howto configure grub 2 to boot with this custom kernel automaticaly?

View 5 Replies View Related

Debian Hardware :: Intel GPU Hangs With Custom Kernel

Jan 2, 2016

I'm using a custom kernel but the Intel Broadwell GPU hangs and gives the following error messages:

Code: Select allJan  2 19:24:06 debian kernel: [   34.734460] [drm] stuck on render ring
Jan  2 19:24:06 debian kernel: [   34.735563] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [1925], reason: Ring hung, action: reset
Jan  2 19:24:06 debian kernel: [   34.735566] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.

[Code]....

View 4 Replies View Related

Debian :: Change The Module And Create Custom Kernel

May 7, 2011

I'd like to change the existing kernel module (driver) file and compile a custom kernel.

Is this the correct way:

View 9 Replies View Related

Debian Configuration :: Compile Custom Kernel Without Debugging Symbols

Aug 3, 2010

I've compiled 2.6.35 for my eeepc, but I have noticed that resulting .deb file is 30mb large. After investigating i saw that modules (and maybe kernel) are compiled with debugging symbols enabled.I've checked my lenny router and modules there are without debugging symbols.So stock 2.6.26 from lenny comes without debugging symbols and linux-image .deb file is around 20mb.Stock 2.6.32-5-686 from squeeze comes with debugging symbols enabled - linux-image .deb here is 26mb. (I have used 2.6.32's .config file to build my kernel, then i did make oldconfig.)I guess this is what increase my kernel size, but how to disable it?Or maybe enable stripping of debugging symbols.

View 3 Replies View Related

Debian Configuration :: Slow Custom Kernel Build Amd64

Aug 17, 2011

I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.

My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg

over

CONCURRENCY_LEVEL=4 make-kpkg --initrd --revision=123x kernel_image?

Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!

View 1 Replies View Related

Debian :: Fsck.ext3: Unable To Resolve 'UUID=theUUID'

Jun 24, 2011

Upon booting my LVM wheezy setup, I get

fsck.ext3: Unable to resolve 'UUID=theUUID'
where "theUUID" (without the quotes) is the UUID

I believe this is caused by me trying to get lvm to use the external /boot because when I had unmounted the external /boot, it was creating a /boot in root. So, I booted a live cd and mounted the external /boot where /boot in the root volume is supposed to be. Basically, I think the problem is that I need to make my /boot (which is the only ext3 partition in the entire system and I want it that way) "relate itself" to the lvm root so that it boots into the system. As mentioned earlier, in the live CD, I made the external /boot mount itself in the root's /boot but I don't know how to tell the system to do this on its own while booting without my assistance. I chrooted from the live cd which involved a lot of tedious stuff but basically the important stuff I did were:

grub-install /dev/sdb
update-grub
update-initramfs -u

P.S.I get the issue in the Subject of this topic by telling tune2fs to mark the external /boot, lvm / and /home partitions as "dirty."

View 2 Replies View Related

Fedora :: Unable To Load Kernel Module 'nvidia.ko'

Nov 29, 2009

im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:

-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device

View 11 Replies View Related

Debian Configuration :: Change The Driver File And Compile Custom Kernel

May 3, 2011

When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:

1.) apt-get install linux-source-2.6.32
2.) mkdir ~/newkernel/
3.) cp /usr/src/linux-source-2.6.32.tar.bz2 ~/newkernel/
4.) cd /newkernel/
5.) tar xjf linux-source-2.6.32.tar.bz2
6.) cd linux-source-2.6.32
7.) cp /boot/config-$(uname -r) ./.config yes "" | make oldconfig
8.) change the driver file /newkernel/linux-source-2.6.32/drivers/gpu/drm/i915_drv.h manually
8.) make-kpkg clean
9.) make-kpkg --rootcmd fakeroot --initrd --revision=custom.001 kernel_image kernel_headers
10.) dpkg -i *.deb

Is this way OK or do I miss something?

View 14 Replies View Related

Debian Configuration :: Apply Driver Diff Patch Into A Custom Kernel

May 21, 2011

I' d like to apply this patch into my squeeze: [URL] Can someone pls explain howto apply driver diff patch into a custom kernel?

View 9 Replies View Related

Hardware :: 3d Won't Initialize With Radeon 5470 And Debian Lenny With Custom Kernel

May 13, 2010

I recently got a new dell studio 1558 with radeon hd 5470 video card. So far have had lot of small problems and such but been able to fix the via google and a lil luck but now I'm stumped with this one and decided to try and turn here for some possible help. Now on to the details.

Distro - Debian lenny with 2.6.33.3 custom kernel propriatory lgrfx 10.4 drivers installed direct from ati (installed no problem)after compiling the kernel and installing the drivers from ATI my card IS recognized and X will boot up with the proper resolution, but that's where all the problems start. I can no longer switch to virtual terminals (ctrl-alt-F1,F2,F3,F4 etc) and graphics performance in X is extremely poor due to the fact that 3D fails to initialize, and catalyst control fails to load (it tries to but then just disappears)

View 7 Replies View Related

Ubuntu :: ERROR: Unable To Load The Kernel Module Nvidia.ko

May 16, 2010

for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).

so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:

Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:

Quote: sudo nano /etc/modprobe.d/blacklist.conf

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

[Code]...

View 5 Replies View Related

General :: Getting Info On Kernel On Another Disk - Kernel Panic Error 6 Ext3

Feb 13, 2011

Dell laptop booting from a USB stick with a CentOS 5.5 minimum installation.

Uncompressing Linux...OK, booting the kernel.
Red Hat nash version 4.2.1.13 starting
sda: assuming drive cache: write through
sda: assuming drive cache: write through
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd-dev failed: 2
Kernel panic - no syncing: Attempted to kill init!

1. Does minimum installation not drop on a kernel or initrd with ext3 support? I can't imagine that's true, but have to ask.

2. The USB stick is single partition ext3. Maybe there is some limitation specifically related to USB stick booting that requires boot to be FAT16 or FAT32? Except the CentOS 5.5 installer refuses to let me install on either FAT.

3. How can I do the equivalent of lsmod on a linux installation that will not boot? i.e. I have CentOS x86_64 running in VirtualBox, I can plug the USB stick in there, so how do I get information on the USB stick's kernel and initrd if I can't boot from it?

4. Is it possible to rebuild the i386 based initrd on this USB stick, when the computer is not booted from that stick, with a system that's x86_64 based?

System Info:
Dell Latitude i686 Laptop which has run CentOS 5.5 and Fedora 12,13,14 in the past, and boots from Fedora 14 Live CD transferred to a USB stick. So I know USB booting is possible on this machine, and this stick.

The process of creating the stick:

CentOS 5.5 i386 on a USB stick. Old Dell i686 laptop which has previously run CentOS 5.5 installed from DVD, and has successfully booted from this same USB stick holding transferred Fedora 12,13,14 Live CDs. CentOS 5.5 was installed onto the USB drive directly by the CentOS 5.5 DVD installer (running virtualized in VirtualBox 4.02 on Mac OS X 10.6.5.). No errors or complaints during installation.

For whatever reason, the installer did not do some things correctly. First Grub wasn't working correctly, I got that sorted out and have the Grub+CentOS splash screen, it finds vmlinuz and the initrd, and then I get a kernel panic.

Ext3 was built into the kernel and that's why I'm getting this message. I do not know how the installer would have dropped a kernel or initrd during instalation that that don't contain such a basic thing that obviously comes in linux kernel 2.6.18-89 EL.

View 3 Replies View Related

Debian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel

May 13, 2011

I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".

View 1 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

Debian :: How To Reset Kernel Modules Load To Default

Aug 21, 2010

trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?

View 3 Replies View Related

Debian Configuration :: Kernel Modules Won't Load Anymore

Jul 7, 2015

After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.

The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode

Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.

...Then several drives show up as clean....

Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented

And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.

After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules

...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.

"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux

I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.

Regarding the module-loading features, running "lsmod" shows about 30 lines:

Module
ext3
mbcache
jbd
dm_mod
usbhid
hid

[Code] ....

...I'm at the limit of what I know to check and/or try.

View 1 Replies View Related

Debian Configuration :: How To Load Own Kernel-module (KO) In Jessie

Mar 14, 2016

I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type

Code: Select allsudo modprobe 8821au

I get a

Code: Select allmodprobe: FATAL: Module 8821au not found..

But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:

Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko

it seems to work:

Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.

But lsmod doesn't show me the module after that.

I also added

Code: Select all./kernel/drivers/edimax/8821au.ko

to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.

So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.

View 3 Replies View Related

Debian :: Synaptic Will Not Load The 5 Binary CD's After Kernel Upgrade

Oct 21, 2010

Af few isssues arised after nessisary kernel upgrad to 2.6.32 bpo.5-686 to allow new wireless card to work. Synaptic will not allow the 5 install CD's to load when I do "reload" It reports

[Code]....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved