After updating my squeeze laptop today I noticed that grub from a few days back fails to --configure.
The dpkg log says
2010-09-09 18:52:45 startup packages configure
2010-09-09 18:52:45 configure grub-pc 1.98+20100804-4 1.98+20100804-4
[code]....
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
i have recently installed freeradius in my debian jessie. i want to configure it to act as radius to my home router to authenticate wifi users. i want to use EAP-PWD auth medthod but there is no such section found in eap.conf.does any body know's how to configure EAP-PWD??
View 1 Replies View RelatedI've got a task: make time server, that gets time from gps, shows it on display and send to different systems through different ports like com, ltp, etc.
Solution is qt program, included in hybrid iso image.
I've created my binary-hybrid.iso debian, added my program and installed it on pc sudo dd if=/media/cdrom/binary-hybrid.iso of=/dev/sda then i restarted and everything is ok, but...
I also need:
1) to make my pc works as ntp-server, to do this i must change file ntp.conf in ntp****.deb before i build my iso
how can i do this?
as i realized according to live.debian.net/manual it's possible to do by putting smth to /live-build/config/packages.chroot and by adding some parameters to lb config but i can't find how and what
2) to save my program parameters after reboot. for example, i have such parameter as gmt. it defined as +3. i can change it while program is running to -5 for example and i want to have gmt -5 when i next time turn on my computer
When in programming it is simple - program creates ini file in it's directory and read/write parameters from this ini-file, but how to make possible to do the same thing when it works from iso?
I am using Debian testing. If I install the gnome-desktop-environment then the sound driver defaults to HDA but since I just installed gnome-core (for a more stripped-down version of gnome) the default is the OSS driver. How do I get ALSA to default to the sound driver HDA?
View 1 Replies View RelatedI saw rsyslog is now installed in Debian Lenny instead of syslog. I want to send local iptables log to remote server. I modified the file config /etc/rsyslog.conf like this :
# provides UDP syslog reception
$ModLoad imudp
$UDPServerRun 514
[code]...
I have a Debian server that had only one onboard NIC (1000 Gbps) but now I've added two PCI Intel Pro 1000 NIC's into the system to bump up the total # of NIC's to three. My question now is can I specifically assign or force Debian which interface to configure as ethx? I would always like my onboard NIC to be 'eth0' and the two additional NIC's to be 'eth1' and 'eth2'. For some reason Debian loads the modules at random and sometimes what was my
View 2 Replies View RelatedI have been trying to configure an MTA (sendmail) on a new Debian installation to receive system messages and local network mail. I have no need to fetch or relay mail outside my teeny LAN. The logs on the sending machine told me the mails were refused by the receiving (Debian Lenny) system. So I ran some quick nmap scans. From the sending machine, scanning the Debian machine:
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
From the Debian machine, running 'nmap localhost':
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
111/tcp open rpcbind
587/tcp open submission
From the Debian machine, running 'nmap debian' (this is a virtual machine named debian) :
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
Why the two different results? How do I get the scans to be the same so I can, eventually, configure an MTA?
I've been trying to configure Postgresql in Debian for some time now, in order to install a ERP program in my computer, but when trying to follow the tutorial for the program configuration I end up stalled. Basically its says this:
1) under su, start by finding the postgresql.conf file (it points the location of the file in /var/lib/postgres/data, but it isn't there) and find the line saying 'tcpip_socket' and changing it to "true"
After a little search and help, I found this file in /etc/postgresql/<version>/main/ but the mentioned line is absent, locate it or tell me where to add it in the file? I've read the file front to back and I'm pretty sure the line isn't there.This is, according to the tutorial, to enable the server to connect to a Java program through the JDBC.
2) after editing postgresql.conf, edit pg_hba.conf and add the following line to the end of the file: host all all 127.0.0.1 255.255.255.255 trust
I get stuck after this, because I'm now supposed to restart the server by using '/etc/init.d/postgresql restart', but bash replies that the path is invalid. The program I'm trying to install is hosted here: [URL]. It's a portuguese ERP program.
To exploit the guessnet capability, I have configured my WIFI so that ifplugd can auto connect WIFI after boot.The access point is hidden, and I have provided all the required info in my /etc/network/interfaces file
mapping wlan0
script guessnet-ifupdown
map default: office-wifi
[code]....
how to configure my firestarter firewall. I have a website which requires the port 1935 to be open. I figured out how to open the port using firestarter. Is there anyway to make the port open only to this website, and not to every other website for security reasons of course.
View 4 Replies View RelatedI've created Live Debian USB image and it works well, but if I put an additional USB stick, then it's just read only. Howto configure Live Debian before rebuild an image to get fully USB support, i mean to write into other USB drives?
View 4 Replies View RelatedSetup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies View RelatedI will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22
PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data.
64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1 Link encap:Ethernet HWaddr 00:25:22:1c:6e:05
inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.42.0.1 P-t-P:10.42.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1775 errors:0 dropped:0 overruns:0 frame:0
[code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
I have just set up the above OS, however, installation did not find my network and therefore APT additional software & security updates could not be accessed.The network was simple to setup post installation.I have uncommented a few sources in the sources list file but obviously that does not,in itself, suffice to get accessability. I am also unable to configure my supported HP printer and I assume that can only be done with an additional package via APT.
View 6 Replies View RelatedI have just installed Debian Squeeze on my spare computer (dual booted with Ubuntu 11.04) and I cannot connect to the internet using Squeeze. Due to my ISP, I have to manually connect this computer and on Ubuntu copying and pasting a text file such as this into the terminal works with no problems.What do I need to do to manually configure my Squeeze internet connection?
View 5 Replies View RelatedTrying to install and configure a webserver - With Postfix, Courier, MySQL And Squirrelmail. But I am stuck. Postfix mail system is not running. It seems to execute /etc/init.d/postfix start, but it really did not. reload; fatal: the Postfix mail system is not running. And in mail.log is that:
Master.cf: line 40: bad transport type: smtp_data_d$_done_timeout=1200
I am trying to configure samba for a stripped down file server. I am running debian with command line only. My problem is that I cannot unmask samba.
See below:
root@debian:/home/aaron# service samba status
● samba.service
Loaded: masked (/dev/null)
Active: inactive (dead)
I have tried "sudo systemctl unmask samba.service". I receive no errors however it does not actually unmask. I can't find anything online regarding a service stuck on masked status.
I have an Acer Aspire V15 Nitro Black edition, and I recently installed after working so hard Debian 8.2
My problem is that I can't see any WiFi connection...
I believe that the firmware for my card is the ath10k, but I can't install it...
lspci -nn | grep Network
07:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:003e] (rev 20)
for some reason I got taping on touchpad is disabled after some software upgrade or something.I can enable it with synclient TapButton1=1, etc.. but have got to do it every time I reboot. Also, I don't have Xorg.conf file. Is there any way I can configure taping to work permanently ?
View 6 Replies View Relatedbut I have been literally banging my head against the wall.I am trying to configure skype on my system (testing, x86) but unsuccessfully.Let me say that I am now using skype (static) as downloaded from skype website.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
[code]....
I have installed Windows 7 on my laptop . Now, it directly boot from Windows 7 . I think the MBR overwrote my grub . I have found two methods by google , but still does work .
1: boot from debian install CD, Alt +F2 switch to the console. "grub " "root (hd0,0)" "setup (hd0,0)".
2:boot from CD, mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt ; chroot /mnt ; grub-install /dev/sda.
I've recently been trying to restore a Debian installation back to it's previous state after a serious operation system crash. Efforts are largely going well however I've run into problems since reinstalling Wine. Previously I could execute a Windows executable by simply entering ./executable.exe in the bash shell but this no longer seems to work as now I have to include the "wine" command in front of the executable. how to configure Debian to automatically use Wine to execute using the ./executable.exe format?
View 1 Replies View RelatedKernel: Linux 2.6.26-2-686 (i686)
Compiled: #1 SMP Thu Nov 25 01:53:57 UTC 2010
C Library: GNU C Library version 2.7 (stable)
Distribution: Debian GNU/Linux 5.0.8
Desktop Environment: GNOME 2.20
Gnome comes with Vino Remote Desktop as part of it's package. I want Vino to run at boot so that I can login remotely.I am using VNC-4.1.3 for remote viewing. However, I can only view remotely once I have logged-in locally
I have got the following Problem: I installed the 64 bit lxde Debian version... I couldnt configure the network during the installation because I just have a dsl modem and not a router... so the configuration of the network failed.... after the installation I started debian... and was surprised about the lack of "basic system configuration"-software that had been installed... I couldnt find aptitude or whats the debian-Update-Programm called .... instead I found OpenOffice... HAE? then I tried to configure internet access..... so I started a terminal and tried to start pppoeconf... but the program wasnt found! ARRRGG! What am I doing wrong here.... Why are these system utilities like pppoeconf not always installed...
View 1 Replies View RelatedI recently installed Debian, and its great except hardware config, any way already fixed that, I reinstalled windows 7, and it removed Grub I tried reinstalling it, and reconfiguring it no luck I've booted into Debian using a boot CD.
View 6 Replies View RelatedI'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).
View 9 Replies View RelatedI got this upon installation of the new kernel:
Code:
And then, on the Cleanup phase:
Code:
My question is, am I going to have issues on reboot, and if so, is there anything I can do to prevent them?
I'm a bit loose on what, specifically, grubby does other than what yum info tells me:
Code:
I have a Knoppix DVD-ROM. I also have its image as k.iso at the second partition of HDD of my laptop. I use the DVD-ROM and write at the boot prompt the cheat code:
knoppix bootfrom=/dev/sda5/k.iso
I also have a folder Knoppix made during bootprompt by using the cheatcode knoppix tohd=/dev/sda5 and I can use the following cheatcode while booting from the DVD-ROM, like knoppix fromhd=/dev/sda5My laptop runs Debian Lenny 5.0.4, installed in the first partition of my HDD.
Can Grub be configured to boot from the Knoppix k.iso image, or the knoppix folder, which I use to use the Knoppix OS, so that I am freed from using the DVD, when I want to use the knoppix system?
I have Debian Squeeze amd64 and i install into same hdd in free space archlinux sda3 /boot, sda4 /
How set grub from debian for boot the archlinux?