I have just installed and enabled plymouth, and during the process I had to update Grub. Something got messed up and I have the following issues:
1. Grub does not show Fedora15
2. Windows7 loader is listed as Windows Vista loader
I cannot log into Fedora15, though I can log into Windows... Please guide to the proper resolution of the above issue.
I use Debian testing and when I run this
Code: Select alluname -a
I see these
Code: Select allLinux debian-mfaridi 4.2.0-1-amd64 #1 SMP Debian 4.2.1-2 (2015-09-27) x86_64 GNU/Linux
What command to show MAC and IP of any computer conected in realtime?
View 9 Replies View RelatedI've been trying to setup Plymouth on Debian Squeeze, but have only been partially successful: Plymouth works with shutdown (i.e. I see Plymouth after I tell the computer to shut down), but not when I start up my computer (before it reaches GDM). In other words, Plymouth seems to work with my graphics, but for some reason does not show up at startup (not even briefly, as far as I can tell). I've searched the forums and followed this advice, as well as the instructions found here: [URL] but neither of those worked. I'm running Debian Testing (Squeeze) on a Thinkpad X41, which uses "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" for graphics.
View 4 Replies View RelatedI was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
Daily updated Debian Testing Because Debian is the only operating system on this laptop and I keep at least two working kernels, I would like to hide Grub2's menu unless I press a key (like one could do with Grub). I can hide the menu if the line GRUB_TIMEOUT=0 is in /etc/default/grub but it doesn't appear after pressing SHIFT, which is a threat if the system cannot boot the selected kernel. Right now, the timeout is set to one second. I've read Grub2's documentation and [URL] and tried various combinations, but I haven't been able to make this work.
View 1 Replies View RelatedI recently installed Lenny but have not been successful using the wireless. have previously used Ubuntu 8.04 where the wireless worked without problems (network-manager).I have also tried to install wicd but that too does not list any available networks. I have presently reinstalled network-manager
lspci:
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
iwconfig:
[code]...
My Debian server is used by people to set up ssh-tunnels for use as a local proxy ( on their remote machines).Since only the tunnel is setup, and no shell is used, I can't use "who" to see which users have an active ssh-tunnel on my server, but I would like to have an idea about who is active etc. I think I should be able to determine this from the auth.log file, but then I would have to use some script to determine what connection is still active. Is there an easy way to see what users have active ssh-tunnels on my Debian server at any given moment?
View 3 Replies View RelatedHow do I make debian not show the grub list, and just go to the newest kernel?
View 7 Replies View RelatedI just freshly installed Jessie on my Dell Inspiron 5110, I configured the network on the installer and had no problem. I can browse the web, get updates and install software.
But I can't find new networks. It just show "No Networks".
lspci -vnn
Code: Select all09:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5325]
Flags: bus master, fast devsel, latency 0, IRQ 55
Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
[Code] ....
What input should I post?
I just installed squeeze and at finish it asked me if it write the MBR with gurb.
I say yes, but after restarintg, squeeze doesnot appear in grub.
I also have lenny in the same PC. code...
How can I run squeeze I just installed.
I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
i had windows 7 on my system and now i installed debian squeeze but grub does not show my windows 7 in menu for selecting how could repair this problem?
View 4 Replies View RelatedBasically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
I have installed Windows 7 on my laptop . Now, it directly boot from Windows 7 . I think the MBR overwrote my grub . I have found two methods by google , but still does work .
1: boot from debian install CD, Alt +F2 switch to the console. "grub " "root (hd0,0)" "setup (hd0,0)".
2:boot from CD, mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt ; chroot /mnt ; grub-install /dev/sda.
I recently installed Debian, and its great except hardware config, any way already fixed that, I reinstalled windows 7, and it removed Grub I tried reinstalling it, and reconfiguring it no luck I've booted into Debian using a boot CD.
View 6 Replies View RelatedI have a Knoppix DVD-ROM. I also have its image as k.iso at the second partition of HDD of my laptop. I use the DVD-ROM and write at the boot prompt the cheat code:
knoppix bootfrom=/dev/sda5/k.iso
I also have a folder Knoppix made during bootprompt by using the cheatcode knoppix tohd=/dev/sda5 and I can use the following cheatcode while booting from the DVD-ROM, like knoppix fromhd=/dev/sda5My laptop runs Debian Lenny 5.0.4, installed in the first partition of my HDD.
Can Grub be configured to boot from the Knoppix k.iso image, or the knoppix folder, which I use to use the Knoppix OS, so that I am freed from using the DVD, when I want to use the knoppix system?
I have Debian Squeeze amd64 and i install into same hdd in free space archlinux sda3 /boot, sda4 /
How set grub from debian for boot the archlinux?
I am trying to dual boot my system. MS Vista and Debian lenny 5.05. Installed Vista first, need vista for voice recognition software. Installed Lenny second but grub does not see Vista. Installed NTFS-g3 so I can read and write to /dev/sdc1 where my vista is. But grub still does not detect it. Installed grub2 and upgraded from legacy but still grub2 does not see the vista partition.
View 6 Replies View RelatedAfter updating my squeeze laptop today I noticed that grub from a few days back fails to --configure.
The dpkg log says
2010-09-09 18:52:45 startup packages configure
2010-09-09 18:52:45 configure grub-pc 1.98+20100804-4 1.98+20100804-4
[code]....
I have happily been booting debian through grub2 by chain loading it with efi (rEFIt), until today, and now get to begin another learning experience I've been using linux for a while, and kept seeing the guides for splitting up /, /var, /tmp, /usr, and /home, into different partitions, so I did just that when I switched from Ubuntu to Debian (I've realized that this was a little bit pointless because I formated them all as ext4, but at least it acts as a safety for mission critical drives when I overfill /home. I unfortunately didn't give /tmp enough space, and it kept crashing SimpleScan so I decided to use gparted to resize it.
The operation went alright as far as I can tell, and was straight forward because there was some free space behind it so I only had to append the partition. I synced the master boot record through rEFIt as usual, but when I booted the linux partition grub did load, and only a blank screen is presented. I eventually figured out I could use the gparted live cd to boot back into debian, and have been screwing around for a while with grub commands trying to figure out how to allow rEFIt to successfully boot GRUB on its own again. I ran grug-mkconfig to replace my /boot/grub/grub.cfg file and have rebooted but that did not help.
I tried reinstalling grub and grub-common with apt-get, but I didn't purge configuration settings for fear of losing something important. My current focus is on the command grub-install. I think i just need to run this command with the /boot device, like su - root; grub-install /dev/sda1 or some thing like that. wipe out the MBR on /dev/sda1, or screw up what good configuration is left in grub, so I want to make sure that I'm using the right /dev. Currently the gparted output looks like this:
/dev/sda1: fat32 - GPT (gpt from fdisk, gparted shows EFI with the boot flag)
/dev/sda2: hfs+ - MacOSx
/dev/sda3: ext4 - /root
[code]...
how the gnome live gparted disk would have been able to boot. I have access to a hard drive so I'll probably end up making backup images of as many of the partitions as I can, and then try more drastic bashing around, but if anyone has any suggestions/wisdom they could offer while I'm researching solutions I'd appreciate it. I eventually want to try to axe my osx partition and boot directly from GRUB2-EFI so I figure it is worth the investment in time to get to know grub a little bit more intimately.
I've been following grub-common bug #606845 and in coming to a solution for the issue, these guys are using dd as a brute force means of swapping out master boot records or trampling them, if you prefer. (Background: The issue is related to grub and certain xp installations)
An sample snip of code:
dd if=/mbrxp.bin of=/dev/sda bs=512 count=1
1) Is mbrxp.bin a back-up of the mbr taken before installation of squeeze (or grub in general)?
2) Am I fubar if I didn't make a back-up of the mbr before installing grub?
We had a server failure this morning because grub was throwing error 15 (file not found). We discovered that the disk had changed names from hd0,0 to hd1,0. Making the appropriate replacements in menu.lst fixed the problem, but I'm still wondering what could have caused the spontaneous name change.
here are some other possibly related tidbits: * the server had been down because of a power loss, but it is behind a UPS so i doubt there is any electrical damage * eth0 also temporarily failed but the system failed over to eth1
My current theory is that when the bios was configuring the hardware the loss of eth0 shuffled around the addresses of the remaining hardware on the pci bus, which somehow caused the hd0/hd1 confusion. The problem is that everything i've read [URL] says that the drive assignment should be based on the way the disk is connected to the motherboard (which in this case didn't change)
I installed Debian GNU/Linux and Debian GNU/kFreeBSD on the same system. I didn't reinstall grub with kfreebsd, because I figured running grub-mkconfig would modify grub.cfg. But it didn't.It recognized the Debian GNU/kFreeBSD as GNU/Linux (6.0.1):
### BEGIN /etc/grub.d/30_os-prober ###
Found Debian GNU/Linux (6.0.1) on /dev/sda3
### END /etc/grub.d/30_os-prober ###
Installed Debian 6 last night after using Ubuntu for close to 3 years. Couldn't believe how wonderful everything was put together and working, with some minor beginning glitches (like nvidea 3D drivers not working) which were to be expected.
But now I'm sitting back in Ubuntu because I can't get Debian started from Grub anymore. The Grub menu is still there and the selections work fine too. I honestly have no idea what caused this. Last thing I was doing in Debian took place in the Software Center where I was installing some GTK+ themes and looking for some general utilities. I did find a Boot Logo/Login changer, at least that's what I think it was, and when I clicked on install ... I received a message that that application was already installed (must have been by default or through synaptic perhaps).
Anyway, as soon as that message cleared out, perhaps 2 or 3 seconds later the screen crashed and everything went black ... I'm assuming that the xerver crashed. Did a CTRL, ALT, DEL which successfully restarted the system. Got back to the grub menu, selected Debian, and got the black screen again with a login for a user, followed by the password request. Knowing next to nothing about Debian I was obviously stuck at that point. Then I tried the recovery console, and exactly the same thing happened.
Rebooted again, got back into the recovery console, and this time, after adding my user name and password, used CTRL + D which caused a ton of text to appear on the black screen. Near the end of it came a FAILURE message ...
Startpar: service(s) returned failure: gdomap failed:
I recently installed another Linux distro, Kali Linux, alongside my Debian 8 and discovered to my chagrin that my computer boots to Kali's grub rather than to the Debian grub. I had spent some time customizing Debian's grub and would hate to see that effort go to waste. Is there a way I can get my computer to boot to Debian's grub instead? I tried deleting Kali's boot partition with gparted but that did not seem to do anything.
View 14 Replies View RelatedI am thinking about maybe trying "LILO" [URL] ....
For my boot loader, from what I have read it sounds even more tempting.
I am totally sick of GRUB, even though it is what seems to be the most popular,and is what normally is used as the "default" when any linux system is installed, that is what the install ISO's use, but anyway, that is another topic, over the years, "grub failing", has been a problem for me , many times.
I saw this (From LILO to GRUB Howto).
I have a ~ 2008 notebook (Compaq CQ60-137EL) on which I had Windows 7 only (it was sold with Windows Vista installed).
Later I installed Debian Jessie 8.2.0 Stable ("Graphical expert install" from DVD), along with GRUB as a boot manager (I chose not to install it on the EFI removable media path).
Since then, if I select Windows 7 on the GRUB boot screen, I see "Starting Windows...", and after few seconds the screen flashes for a moment, and then the PC reboots: I see the bios screen, followed by the GRUB screen again.
What's even more weird about this is the fact it just happens only in like ~50% of the cases. In the other 50%, Win7 starts flawlessy.
I even tried to install Debian first, then Windows 7, then re-install GRUB, but I got the same issue, even with both system freshly installed.
On 6 attempts, 3 times it worked and 3 times it didn't.
On my desktop PC I'm in the same setting, but I don't have this issue. I think it may be related with the fact I have Win7 on a SSD and I installed Debian on a separate HDD, while on my notebook, as you can imagine, there's just one single HDD.
I decided to finally change the grub 1.98 splash image today and found a few tutorials on how to do so. They all pretty much said the same thing. Resize an image to 640 x 480, save it as a .tga, stick it in /boot/grub/images/desktop-base. I did so and opened /etc/grub.d/05_debian_theme and changed WALLPAPER="/usr/share/images/desktop-base/moreblue-orbit-grub.{png,tga}" to WALLPAPER="/usr/share/images/desktop-base/56871.{png,tga}". After that I ran update-grub. When it told me the image it found, it said it found desktop-grub. I don't know what I did wrong but it's not finding my image. Like an idiot I forgot to back up the original file but the only thing I changed was that WALLPAPER line, like I said. I had copied that version of the file and pasted it in another document before messing around with different parts of the file to see if I could get it to work. Everything ended in failure so I copied the back up in the other document and simply pasted it over the one I had been tinkering with. However, when I try to update grub I get a syntax error which I didn't before with the exact file I have now. The error reads:
/etc/grub.d/05_debian_theme: 65: Syntax error: end of file unexpected (expecting "}")
Here's my grub file.
#!/bin/sh -e
. /usr/lib/grub/grub-mkconfig_lib
# this allows desktop-base to override our settings
f=/usr/share/desktop-base/grub_background.sh
[Code]....
I'm completely lost at this point, both on how to actually change the splash image and why I'm getting a syntax error.
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.