Recently after updating my Debian Jessie, I can no longer access windows shares. I can access those shares from windows PC. And to be able from debian.
After I enter my password of windows share, the password dialog box pops up again. No warning, no errors. It just pops up. I cannot connect to any windows share.
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies View Related"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. One of the hosts that are on the outside of my firewall has a share that I and other Linux-users on the debian server wants to access.
View 1 Replies View RelatedI'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
I use Debian Squeeze on my laptop, and in my office we have a WinXP box where we store all our documents and stuff. When I'm in the office, I can directly mount my directory to edit documents, and at home/wherever I can use VPN to connect to the box so it's no problem again.
However: I'd like to know if there is a way to set up a directory on my laptop, that I can use even when offline, and then when I'm connected to the office computer, it automatically syncs with it.
I have Debian 8 with VBoxGuestAdditions (4.3.18). I can connect to this box from Win7 using RDP (mstsc.exe). When I connect from Windows 10 using mstsc.exe I've got error code 2308. I tried NoMachine, 2XClient, RoyalTS none worked.
W10 connecting with RDP to Linux server? If I would install xrdp onto the Linux server would it work for me?
Is it possible to connect from Win10 to Linux using RDP?
I would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
I want to connect my linux distro to a windows file share on a networked computer.
View 1 Replies View RelatedI'm running Fedora 13 on my laptop and am trying to share out a folder from a Win7 computer. Folder on Win7 machine is set to allow access to everyone.In Fedora, I have SELinux disable, I've made sure samba is allowed in the firewall, and that the smb service is running. There's no password on the Win7 computer, so in the Windows Share setting on Fedora I just put the username and left the pass field blank.
I've seen some things say all you have to do is go the the "Network" place...but somehow that seems to have become non-existent and I don't know how to get it back.Also, trying to connect to smb://WinShare/Share results in it saying that the server has timed out.
My laptop has Ubuntu 9.10. It can connect to shares on my XP and Vista computers without issue, but cannot connect to a share on my Windows 7 system. I'm using "Connect to Server" and have tried by both Computer name and IP address. When I click connect, it prompts me for User ID, workgroup and password, however when I enter them, the same prompt comes back a few seconds later and is blank. I don't receive any errors, it just won't connect.My XP and Vista systems can connect to the Windows 7 share, just not the Ubuntu system
View 9 Replies View RelatedI cannot connect to a share on Windows XP machine, because it rejects my password. I'm using correct username and password. When running from console, smbclient's error message is: session setup failed: NT_STATUS_LOGON_FAILURE I can connect to said share from other Windows machine.
View 9 Replies View RelatedI am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
Code:
[global]
netbios name = KISKA
cups options = raw
load printers = yes
server string =
[code]...
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
I'm wondering if I can get an answer to this oneI'm pretty new to Ubuntu, been using it off and on for a few months now. Right now I'm using Lucid and I have no problem connecting to the other PC's in my house that run Windows 7, however when I try to access them it asks for a password. I disabled the password on the Windows PC, so is it possible to get into them without a pass? If so, how
View 3 Replies View RelatedI have shared my cpl-300 from my windows 7 machine to my network, so that may print from my linux laptop to it.
Now whenever I go to system -> Administration -> Printing and try and browse for my printer it asks for a username and password any username or password I enter that is on the windows 7 machine gets rejected.
So I tested to see what would happen if you used smbclient to view the shares available from the windows 7 machine, unfortunately it results in another permission error. The funny thing is I can mount a share using "mount -t cifs".
I am having difficulty connecting to a PC that runs Windows 7 (and suffice it to say Windows XP as well). I go to Places > Connect to Server and choose Windows share from the drop-down list. I enter in the computer's IP address in the Server field and click Connect, when I'm brought to the "Password required for x" screen (x being the IP address). I enter my username for the Windows machine, leave the Domain field as is (it is WORKGROUP by default, which is the Workgroup name for both PCs), and then I enter my Windows password. The dialog keeps popping up as if I entered incorrect credentials. I do want to point out, on the dialog, it asks for a Domain name. Since I do not have this computer connected to a domain (I'm at home), it is a workgroup network. However, prior to Ubuntu 10.10, I was able to use this method to connect to Windows computers.
View 9 Replies View Relatedif i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
For some reason, my latest Fedora 11 install + yum update does not seem to have the option to connect to a Windows Share in the drop down list when I select Connect to Share. I'm using gnome.Does anyone have any ideas which packages provide this functionality.
View 2 Replies View RelatedTrying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
i've been trying for the last 2 days (onoff) to setup a simple samba share to connect to my windows 7 box
[Code]....
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The relevant section is:
Code:
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
I have an adapter eth0 I need one shared folder to exchange files, with another machine configured as 192.168.0.3/255.255.0.0
ping is working fine between both machines, but I think my problem is in routing, or I need to add a shared resource and I am having trouble with that... not sure if maybe I need to mount something as nfs or what?
[Code].....
I currently have a Samba share on a Debian 7 system. This share was only ever used by Windows systems on the network.
I just finished setting up a Debian 8 system with Xfce, and now I would like to connect to the share. I already installed gvfs-backends and gvfs-bin. When I go to Thunar file manager, and click browse network, I'm presented with a "Windows Network" shortcut. When clicked it says: Failed to open "Windows Network". Failed to retrieve share list from server: No such file or directory.
Is it possible (on lenny, in case that matters) to backup some directories with rdiff-backup, with the target being a WinXP Pro Host, i.e. the target being a SMB share? My idea is to start the XP-Box over WOL, run rdiff-backup and then shut it down using "net rpc SHUTDOWN"...
View 1 Replies View RelatedI have two remote systems which I have fstab entries for on the local system. I have them set to noauto, because mount fails during boot for some reason, but that's not the problem. For years I've mounted them in rc.local.
The problem is after I recently reinstalled Debian, when I mount them manually it always asks for my user's password. I've copied my user's pub key from the local to the remote system and put it in the user authorized_keys file (not root), like I always have. But it still asks for a password, and so fails to mount in rc.local.
Running 8.3..On 7.6 I had a automount and I was able to mount/unmount without issue. With 8.3, I can mount, but when I am in Thunar and i unmount, it gives me a permission denied.In /etc/groups I am in plugdev.
View 2 Replies View RelatedI've got a fresh Wheezy/Xfce install.I'm trying to access a remote samba share the gigolo way. It is an external USB hard drive connected to my router. I can access it read only using the following URL with Icedove: smb://bbox/
Anyway, this is just to try and give might-be-useful information, but ultimately, I don't really want to use fusesmb. I would rather have the gigolo way working, allowing local network shares browsing, auto-connect, etc.