Debian Configuration :: Access Remote Samba Share Gigolo Way
Jul 18, 2011
I've got a fresh Wheezy/Xfce install.I'm trying to access a remote samba share the gigolo way. It is an external USB hard drive connected to my router. I can access it read only using the following URL with Icedove: smb://bbox/
Anyway, this is just to try and give might-be-useful information, but ultimately, I don't really want to use fusesmb. I would rather have the gigolo way working, allowing local network shares browsing, auto-connect, etc.
I need to access a windows share at my university's server. When I am at the university, I can access the share by nautilus (or dolphin) in a similar way to ftp:
smb://domain%5Cusername@server/share
The thing is that when I try the above anywhere else except the university, it does not connect. I guess it has something to do with the domain, but I am not sure.
I have two remote systems which I have fstab entries for on the local system. I have them set to noauto, because mount fails during boot for some reason, but that's not the problem. For years I've mounted them in rc.local.
The problem is after I recently reinstalled Debian, when I mount them manually it always asks for my user's password. I've copied my user's pub key from the local to the remote system and put it in the user authorized_keys file (not root), like I always have. But it still asks for a password, and so fails to mount in rc.local.
I currently have a Samba share on a Debian 7 system. This share was only ever used by Windows systems on the network.
I just finished setting up a Debian 8 system with Xfce, and now I would like to connect to the share. I already installed gvfs-backends and gvfs-bin. When I go to Thunar file manager, and click browse network, I'm presented with a "Windows Network" shortcut. When clicked it says: Failed to open "Windows Network". Failed to retrieve share list from server: No such file or directory.
Is it possible (on lenny, in case that matters) to backup some directories with rdiff-backup, with the target being a WinXP Pro Host, i.e. the target being a SMB share? My idea is to start the XP-Box over WOL, run rdiff-backup and then shut it down using "net rpc SHUTDOWN"...
How come I can access samba share, and windows workgroup computer and don't have any samba package installed? Sudo aptitude show smbclient says not installed. Sudo aptitude show samba says not installed.
I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:
I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?
I am having slight issue with setting up file sharing. I have a windows 7 pc and hp proliant microserver running. I have a raid array which I am using as a share for storing music, pictures etc. When I reboot the debian server I can't connect to the server from the windows 7 PC (I have mapped a network drive) until I go on to the server and restart samba with /etc/init.d/samba restart - then everything works fine. I can ping the server with both ip and hostname but the network drive does not connect - this is straight after a reboot. Is the /etc/init.d/samba restart doing something differently to when the server boots? I have read several posts relating to printer sharing issues which point to samba not starting before cups so I am wondering if samba is starting before some of the relevant networking services.
I'm having a strange problem with data transfers between systems. I have a file server + my desktop. Both are running Debian 8.3. I have a samba share running on the file server and I mount the shares on my desktop on boot via /etc/fstab
When I copy a file using the nautilus from my home folder (on my HDD) on my desktop to the mounted network location, my transfers start out at gigabit speeds 80MB/s-90MB/s for a couple seconds and then drop down to about 8MB/s
But when I terminate the transfer and then use scp to transfer the same file, I get consistent gigabit speed throughout the transfer. I am not sure what is going on.
"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. One of the hosts that are on the outside of my firewall has a share that I and other Linux-users on the debian server wants to access.
Following yesterday's and then today's upgrade of my Debian 8 32-bit system (among other things to samba 2:4.1.17+dfsg-2+deb8u2 (yesterday: ...deb8u1)) I cannot connect my Mint 17.3 laptop to the server anymore. Were there any changes to smb.conf regarding authentication or other aspects that might lead to this problem? I am enclosing part of my smb.conf. By the way - I also have trouble using ssh to connect to the Debian machine, such as the ssh-command taking "for ever" and then getting the message "Write failed: Broken pipe" when entering an ls-command on the command line.
H. Stoellinger smb.conf: [global] workgroup = RAINERMUSIK netbios name = hsdesk server string = Samba Server hsdesk
Let me introduce myself, my name is Carlos Alegría from Chile and I'm System administrator for a educational Institute. We use samba+ldap, for login accounts and file sharing but we not use samba with PDC.
Long time ago at the 2009 year, I was Installing the same system and this worked perfectly. But on our summer the hard disk of server has broken, so i was need installing all the system again. So the problem is with SAMBA, when i connect to the network resource, this is to slow, and when i try transfer files are slow.
My sistem is on Debian 8 Jessie and the Samba Version is 2:4.1.17+dfsg-2+deb
Code: Select all[global] workgroup = LABORATORIO netbios name = Shinigami server string = debian
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
wants some sort of logging capability on the system. to have a log of every change to every file, although that might be a bit unwieldy. perhaps a simpler compromise would be some way of monitoring a few specific folders, and tracking all changes to them, including the user that did so. Particularly important is that it should be possible to work with access through samba, as we want to track what users on the network are creating or changing files. Is there functionality like this already built into debian or samba? is there a useful additional app to gather this information? or am I going to need to be grep'ing log files to present something useable?
Server: Ubuntu Server Edition 8.04 /currently firewalled to only allow client ip Client: Ubuntu Desktop 8.04 /currently firewalled to only allow server ip
Same userid and groups set up on on both. I have taken two linux courses and can maneuver around fairly well, but am still pretty newbie at all this. We have loaded Samba on a server and created a Samba share. I AM able to access that share via Windows Vista, but have not been able to successfully mount the share on the Ubuntu desktop via the fstab file. I have tried the following ways: serverip:/path/shareddirectory /net ext3 user,sync 0 0 and the samba way..
After modifying fstab, I reboot. No luck since that either way.Only ONCE after modifying it samba way, I was prompted to enter credentials, but after login I was unable to view the files on the server. From this point on either way, if I run commmand 'mount -a' the response is "Special device serverip:/path/sharedirectory does not exist" Also! I am able to ping client-to-server, but not server-to-client.
I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this:mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000.I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has?
Mount the remote samba with multiple groups on the local system?Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs.which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.
This is my first post. I am not all that new to Linux. I have done lots of reading on the OS but always felt a little timid when it came to trying out stuff.Here is my problem I have a stand alone samba server I am trying to setup to share all my digital photos and other doc. I can see the share from other machines. On the windows machines you can see the users home directory and the share itself in an folder icon. Whenever I try to access the share it asks for a passwd. I enter the passwd and the share folder is visible when I click on the folder I get and error message.
I have a samba-share that mounts on my desktop. But how do I find it from applications? When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
I installed samba server on fedora13 last week and share some files from samba server GUI. I also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP. When I open samba share from other fedora such as smb://192.168.10.2. I can see share file and when I browse folder, password required box is appeared but after I put samba username and password. The Error message is Unable to mount location Failed to mount Windows share. Even when I browsed samba share from windows xp.
Error message is \192.168.10.2smbshare is not accessible. You might not persioon to use this network resource. Contact the administrator. The network path was not found. How can I get access samba share from both fedora and XP that is what I installed on server:
I'm relatively new to liunx and I have recently installed Fedora 9 to act as a media server. I thought everything was going well until I tried to connect to my Samba share but could not.Not sure what the netbios is but I believe this can be anything I want?So as far as I can tell, the laptop can see the Samba Share, Fedora can see it's own Samba share but nothing (both laptops XP and Vista or the Media Player) can connect to the /public folder..I don't login to either Laptop with a user account, so I believe I do not have to create a user.
i want to do a script that check samba shares with command smbstatus and see if one of the folders is accessed by unauthorized user by comparing with list of authorized users.
I have Samba shares on a Red Hat server vmware virtual machine. We just upgraded our vmware tools and vmware hardware to vsphere and now I can't authenticate to the samba shares. It prompts for credentials, but it won't take the login. Has anyone seen this or have any idea how to fix this?
I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.
When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:
[global] workgroup = MAJOR netbios name = VPN realm = MAJOR.COM
I am trying to share a USB external Hdrive from my ubuntu install to my windows systems (win 7 and 1 win xp) Everything seams to be working.. as in I can see the computer in "network" from windows explorer.... The problem is no matter what I do I can not seam to browse onto it or even type in direct share locations....
EG: //Zbox/HDMedia
or just browse through the Zbox computer icon that appears in my "Network" window in explorer. I have "sudo chmod 0777 /media/HDMovies"I can see it in the win7 Network window.. I assume it is some setting for security...I am on a home network and not very security conscious. I just want it to work.
when client goes to bind to NFS share on remote server - they are getting access denied when using the mount command; [SERVER] - CentOS 5.3 /etc/exports /mnt/data 192.168.5.199(rw) - implying the client I want to have access
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
I have configure few folders access by 3 users, In common folder only users that create that document can do changes. The rest of the users can only read the file but can not do changes. Ownership of the folder is admin, group is sambashare which already have the access create and delete files. All the 3 users already in sambashare main group, and they only can edit the file that they copy or create to the common folder .........
My work uses an internal software suite where the data is hosted with a linux server. It uses mysql and samba shares. We are currently opening a new location and need to be able to access the samba shares. We are able to access the mysql databases. The samba shares are used to store various files for the software such as updates, invoices (as pdf files), etc. I've setup vpn connections using windows servers in the past but I can't, for the life of me, get a VPN server setup on our linux server that windows will connect to. I've tried openvpn and pptp. I'd prefer to use the built in windows client to connect.
why cant I access samba share by short-hostname from win7.when I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com pinging short-hostname does work, but accessing it from start-run does not! accessing by ip or short-hostname.mydomain.com works fine.ssh by short-hostname from win7 works fine too.
I am using samba t share my files.I am sharing /media/MEDIA folder. it is a ntfs partition mounted with ntfs-3g with write/read access from linux.I can see and browse my shares and also create files in the root of this partition, ie /media/MEDIA, but in its subfolders i do not have write permissions.
another interesting thing is that i have permission to create directory and delete files everywhere and in any folder, subfolder but when trying to create files i get not enough free disk space error.by the way i dont know if this config file is correct, i find as template in internet.
