Debian :: Can't Kill Desktop 'keep Aligned'?
May 31, 2011
OK, I admit I'm a little OCD about icon placement on the Desktop - I want to do it myself - so this is driving me a bit nuts.I have right-clicked to disable the option 'keep aligned'. I have made sure it is disabled in gconf-editor. BUT IT KEEPS COMING BACK!ince I don't mess a lot with my desktop, I'll notice it's reverted when I add something new, can't place it exactly where I want to and once again have to untick 'keep aligned'.It seems to be random so not quite sure what might be triggering it.
View 2 Replies
ADVERTISEMENT
Aug 6, 2010
I use with 11.2 a network without problems.Now I installed in the same PC on another hdd 11.3 and get in yast2 network the messages:eth0 not aligned and for wlan too.My driver realtek r8192s_usb What can I do? adda7,
View 1 Replies
View Related
Feb 10, 2011
What does the "Keep Aligned" option for the desktop do in Ubuntu (Nautilus)? I was expecting it to work much like what I had previously seen in other operating systems, but it doesn't.So for example, I can drag an icon and drop it two pixels away from its original place, and it is not aligned back to the previous place automatically, however, if I disable and re-enable the Keep Aligned option, it is aligned to the grid.Is it that Keep Aligned option is not working on my installation, or is it generally supposed to work like that?
View 3 Replies
View Related
Oct 21, 2010
Today I run OpenOffice.org extensions update and it freezed fter showing me that everything was successful.When i xkilled it it refused tolaunch without any problem indication.killall soffice.bin didn't report "No process found" after 1,2,3...20 times.So I tried killall soffice.bin -i
Code:
$ sudo killall soffice.bin -i
Kill soffice.bin(3319) ? (y/N) y
[code]...
View 1 Replies
View Related
Jan 13, 2011
the process is mcelog. When I do as root kill -9 2323 which is pid of mcelog the process is not killed. I tried doing the same from top, press K and enter pid of mcelog. doing ps auwx | grep mcelog I see there are several results. I tried killing all of them like kill -9 2355 2341 3425 2345. But re-running the above commands still shows them as running. How else would I troubleshoot this to avoid restarting of the box.
View 5 Replies
View Related
Feb 2, 2016
Sometimes (rarely) when I try to open VLC it wont open, but it stays in the background and takes 98-100% of one core.
The problem is that I can't kill that vlc-process.
Code: Select allkillall vlc
will NOT kill it
and
Code: Select allkill 31641
won't work either
top shows
Code: Select allPID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31641 xxxxxxxx 20 0 1320248 64384 39120 S 100.0 1.6 44:51.94 vlc
Is there any way to kill the vlc-process (without booting the machine)? I also tried the "killall vlc" and "kill 31641" as root with the same results.
I have Debian jessie and the only "nonofficial" repositories I have enabled are
#google chrome
http://dl.google.com/linux/chrome/deb stable main
#Backports
deb http://httpredir.debian.org/debian jessie-backports main
And from those I have installed only chrome, and wine-development, and I dont think those could have anything to do with this problem.
Booting the machine does work, but I don't want to boot my machine just now. This happens about once per week
View 4 Replies
View Related
Dec 31, 2010
well i am doing an assignment about debian OS 5 . so i need some info about Deadlocks and how to kill a process using GUI interface . i already found a way to do it in Command line .
View 3 Replies
View Related
Dec 4, 2010
i googled around and finally stumbled over this forum. I've been wondering, how would i kill an process running from an folder and with user parameter? I usually type this into the ssh console: pkill -9 < process > -U < username >
But i want users be able to run it multiple times, and killing only an specific process and not every single one.
View 4 Replies
View Related
Mar 16, 2011
if i run /bin/dash at the command prompt I get the message /bin/dash: Bad substitution shown repeatedly until I kill the process
View 14 Replies
View Related
Mar 13, 2011
I am running Debian testing with XFCE and have been trying various GTK email clients looking for something I like. So far I like Balsa but everytime I start the program, Debian asks for my gnome-keyring password. How do I kill this behavior?
View 2 Replies
View Related
Jan 3, 2010
I have Fedora 12 & GNOME. But, this actually is an issue with many Linux distro's and GNOME. If I set the Keep Aligned Check Box Off - the next reboot it is back too set on. (Right click empty area on GNOME Desktop). I have searched many forums and search engines, I must be doing my search wrong there must be others that have noticed this, And the posts I do find on it are sometimes pretty old, so it does not seem like a bug would be around so long. I saw some notes about Nautilus also but no answers. FYI In CentOS 5.4 & GNOME it works properly.
View 3 Replies
View Related
Sep 19, 2010
I installed openSuSE 11.3. By default, man pages blocks are justified (block-aligned). Example:
Code:
WARNING Improper use of this command may seriously damage your system,so read this manual carefully to understand how to use it correctly and prevent yourself from destroying your system. Instead, I would like all manual pages would be displayed left-aligned, like this:
Code:
WARNING Improper use of this command may seriously damage your system, so read this manual carefully to understand how to use it correctly and prevent yourself from destroying your system.
I definitely would not like to reformat all the manual pages one-by-one. but rather just changing sometnihg in some macro-definition file or something similar? .. Is it possible achieve that simply and quickly?
View 15 Replies
View Related
May 1, 2010
I'm currently running a Ubuntu 9.10 64bit machine with one of those 2TB WD disks that does have 4KB blocks.Unfortunately the current partition layout is misaligned, so I plan to back up my home directory and start fresh with a 10.04 install, trying to make the partitions aligned as suggested here:what I'm wondering is, does the 10.04 partitioning program take care of the alignment today or I have to resort doing manual partitioning with a separate tool?
View 1 Replies
View Related
Jul 17, 2010
After reading Markus Ewald blogpost on http:[url]...n-ssd-on-linux about Aligning an SSD on Linux I decided to give it a try.I have bought two 80 GB Intel X25-M SSD for my home server. The plan is to install Ubuntu 10.04 64-bit server and use the SSDs as system discs and vmware data storage using software raid for redundancy.After reading the blog post I am not sure how to make all my partitions aligned and set up on EBS (Erase Boundary Size)I am planning for four partitions:Boot, size 1GB
Root, size 25GB
Swap, size 4GB
Data storage for vmware server, size 40GB
According to Markus Ewald I should use 32 heads and 32 sectors.Using the live CD, I started using fdisk -S 32 -H 32 /dev/sda.Fdisk can create partitions using cylinders or sectors, and now I ran into trouble.
First partition /boot must start on cylinder 2 (or sector 1024). Size is 1 GB and the following partition should be aligned and start on a new EBS block. How do I do this with fdisk?Should the next partition start on a new cylinder? Otherwise, after formatting, fdisk gives a warning that the partition is not aligned to the cylinder size? The overall question is how to format four aligned partitions which all are aligned with Intels X25-M EBS. EBS for Intel X25-M is either 128KB or 512KB (Have not found a confirmed value yet)
View 1 Replies
View Related
Feb 21, 2011
recently my window list in the bottom panel (where it shows all the minimized windows, etc.) got removed. When I added it back,'s not aligned all the way to the left as expected, it's more towards the middle
View 3 Replies
View Related
May 16, 2011
I'm on Ubuntu 11.04, and am trying to overlay a static blue coastline image onto a geostationary animation with 12 frames using imagemagick. I have received no replies from them on their forums.The code I used to create the composite animation is as follows:
Code:
convert ( animation.gif -coalesce ) null: ( outline.tif outline.tif outline.tif outline.tif outline.tif outline.tif outline.tif outline.tif outline.tif outline.tif
[code]....
View 1 Replies
View Related
Apr 9, 2009
I want to write a function which calculates the space needed between fields, to generate a table with aligned fields, like when you type "ls -l", the operating system generates a table with beautifully aligned fields. I've got this code so far:
Code:
for line in $(cat tmpSearch)
do
line=`echo $line | tr ":" " "`
[code]....
View 2 Replies
View Related
May 16, 2011
I'm on Ubuntu 11.04, and am trying to overlay a static blue coastline image onto a geostationary GIF animation with 12 frames using imagemagick. The code I used to create the composite animation is as follows:
Code:
convert ( animation.gif -coalesce ) null: ( outline.tif -coalesce ) -layers Composite composite_animation.gif
The resulting animation is below:
[URL]
It's a bit hard to see, but the blue outline should be aligned much farther to the left on the image, but the vast majority of it is cut-off to the right because it is shifted so far. It should be centered. Both the outline and the background are actually cropped regions out of respectively larger images that are identical in size and are designed to be overlaid.
If I choose a cropped region farther to the right on the background animation, the cropped blue outline of the same region won't even show up at all after the overlaying, as if it is shifted completely off the screen for some reason. I have had success overlaying outlines before with the above command, but here it is not working. I tried appending "-gravity center" to the command with no success.
View 1 Replies
View Related
Aug 17, 2010
I doing malloc and getting the chunk of dynamic memory. Now I want it to align that memory to 64KB. This means that the address of the memory starts from 64KB or multiple of 64KB.
View 3 Replies
View Related
Apr 20, 2010
The lines beginning with greater-than symbols are the sequence descriptors and the lines immediately after each descriptor with A-Z characters, dashes, and question marks are the aligned DNA sequences. The sequences are always the same length within a file and never span/wrap across more than one line.I am trying to write a script to remove positions in the sequences that are only represented by a -, X, ?, or N (these represent gaps or missing data). Also, if there is exactly one non-gap/missing character in a position it is also useless (there is nothing to compare it to) so I would like to remove those positions as well.
Position 5 (from the left) was removed because it was all gap/missing characters. Position 9 was removed because only one character was a non-gap/missing character. Position 10 was retained because there were 2 non-gap/missing characters.I'm really not sure where to start here. My first concern is I can't figure out how to tell awk to treat each character in lines not containing a greater-than symbol as a separate field. After that, I'm thinking I should use set up a counter to count the number of lines with gap/missing characters comparing that to the total number of lines not containing greater-than signs?
View 14 Replies
View Related
Nov 4, 2010
I boot from CD (Tried both debian-506-i386 and the Netinstall) I also tried the flags acpi=off noapic nolapic And when it starts booting the install, it appears: "Kernel panic- not syncing: attempted to kill init"
View 5 Replies
View Related
Jun 11, 2010
When I deactivate "Keep aligned" for all icons on my desktop it works fine - until the next reboot. Then the entry is enabled back again. How can I permanently the feature int he future?
View 3 Replies
View Related
Dec 31, 2010
In Fedora 14, is there a setting in Configuration Editor that you can't uncheck, to uncheck Keep Aligned in right click desktop? Or, is there a piece of code that destroys that indelible check? When that box is unchecked, it's back on the next boot. It always messes up my desktop icons.
View 4 Replies
View Related
Apr 29, 2010
In Ubuntu 9.10 (karmic) right-click the desktop and uncheck the "Keep Aligned" checkbox.Then reboot. Now the Keep Aligned checkbox is checked again. Keep Aligned automatically reverts to the checked state. I didn't have this problem with Ubuntu 9.04.Why can't I permanently uncheck the Keep Aligned checkbox?If you search Ubuntu Forums for the term "Keep Aligned", you will find several discussions about this bug, some dated almost 6 months ago. As yet no one has offered a solution. Several people, including myself, are very irritated by this bug.
View 6 Replies
View Related
May 11, 2011
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies
View Related
Nov 5, 2010
when u running command "top" u can see table and under %CPU i see some time used over 60% how can make server kill any thing using 60% or over auto ? i'm not using php or mysql i hosted vps's and they not runung mysql
View 8 Replies
View Related
Jul 30, 2011
I have seen the following command:
$ kill %1
What is the usage of this statement?
View 2 Replies
View Related
Jun 23, 2010
Since the OpenOffice quickstarter effectively disables the shutdown and hibernate buttons under Lucid, I put a command into my .logout to kill the quickstarter:
Code:
kill `ps aux | awk '/soffice.bin/ && (/quickstart/ || /splash-pipe/) {print $2}'`
This works fine if I execute it manually, but in the .logout file it seems to have no effect.
View 2 Replies
View Related
Aug 4, 2010
I accidentally submitted a print job twice. So I have this job sitting in the queue and haven't been able to figure out how to clear it. Tried system > administration > printing. Nothing there about how to clear the queue. I'm running 8.04.
View 4 Replies
View Related
Dec 10, 2010
Sometimes I find a process named 'sh' running under my username with the status 'zombie' waiting channel 'do_exit' on my system. Its ID increments by 4 every time System Monitor updates its display.
Today, it was there immediately after booting The only thing I did after logging in is start the System Monitor
I can't kill it since its ID changes too fast.
I don't know how it gets started, but it bothers me since it is behavior I would expect from something that is trying to hide.
If I hover over its name, the tool tip contains 'sh'
View 3 Replies
View Related
