the process is mcelog. When I do as root kill -9 2323 which is pid of mcelog the process is not killed. I tried doing the same from top, press K and enter pid of mcelog. doing ps auwx | grep mcelog I see there are several results. I tried killing all of them like kill -9 2355 2341 3425 2345. But re-running the above commands still shows them as running. How else would I troubleshoot this to avoid restarting of the box.
View 5 RepliesI"m trying to kill some processes that are interfering with airmon-ngWhen I run airmon-ng and tell it to turn on monitor mode on a given interface it says:Code:Found 5 processes that could cause trouble.If airodump-ng, aireplay-ng or airtun-ng stops working aftera short period of time, you may want to kill (some of) them!
PIDName
20875wpa_supplicant
20879NetworkManager
[code]...
I have a java process running in background. I have no java dependent program opened and even if I had, this program should be killed if I kill the Java process. top shows that Java causes almost 90% cpu usage.
[Code]...
The only way I can imagine is to restart, but this might happen again.
Today I run OpenOffice.org extensions update and it freezed fter showing me that everything was successful.When i xkilled it it refused tolaunch without any problem indication.killall soffice.bin didn't report "No process found" after 1,2,3...20 times.So I tried killall soffice.bin -i
Code:
$ sudo killall soffice.bin -i
Kill soffice.bin(3319) ? (y/N) y
[code]...
I tried googling but didn't get any answer for this.I have a process called "abc" and it is running with PID "123".I have a putty session opened with PID "999".I am giving kill -TERM 123 from putty session.My process "abc" before dying it should catch the PID of the terminal which provided TERM signal to it.Is there any way to find this out
View 2 Replies View RelatedSometimes (rarely) when I try to open VLC it wont open, but it stays in the background and takes 98-100% of one core.
The problem is that I can't kill that vlc-process.
Code: Select allkillall vlc
will NOT kill it
and
Code: Select allkill 31641
won't work either
top shows
Code: Select allPID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31641 xxxxxxxx 20 0 1320248 64384 39120 S 100.0 1.6 44:51.94 vlc
Is there any way to kill the vlc-process (without booting the machine)? I also tried the "killall vlc" and "kill 31641" as root with the same results.
I have Debian jessie and the only "nonofficial" repositories I have enabled are
#google chrome
http://dl.google.com/linux/chrome/deb stable main
#Backports
deb http://httpredir.debian.org/debian jessie-backports main
And from those I have installed only chrome, and wine-development, and I dont think those could have anything to do with this problem.
Booting the machine does work, but I don't want to boot my machine just now. This happens about once per week
well i am doing an assignment about debian OS 5 . so i need some info about Deadlocks and how to kill a process using GUI interface . i already found a way to do it in Command line .
View 3 Replies View RelatedCan we just put all the processes in one group and kill that group? Is there any other way to do this?
View 3 Replies View RelatedA process with name=example can be killed by killall -9 example
How to kill multiple instances of following command which contain spaces?
"valgrind --tool=lackey ./testcases/kernel/syscalls/waitpid/waitpid03"
Following command returns valgrind --tool=lackey ./testcases/kernel/syscalls/waitpid/waitpid03: No such file or directory
Ctrl-c doesn't always work to kill the current process (for instance, if that process is busy in certain network operations). In that case, you just see "^C" by your cursor, and can't do much else.What's the easiest way to force that process to die now without losing my terminal?
Summary of answers below:Usually, you can Ctrl-z to put the process to sleep, and then do "kill -9 process-pid", where you find the process's pid with 'ps' and other tools.On Bash (and possibly other shells) you can do "kill -9 %1" (or '%N' in general) which is easier. If Ctrl-z doesn't work, you'll have to open another terminal and kill from there.
How to kill a process initiated by another user, who is in same group as me?
View 1 Replies View RelatedHow can I kill a specific wine process? for example paint shop pro has crashed under wine and will not close but how can I find the specific pid to kill it? ps axwww | grep wine shows the pid of wineserver and winedevice but it doesnt show the pid of the prgram I want to kill
5995 ? Ss 0:00 /usr/bin/wineserver
6001 ? Sl 0:00 C:windowssystem32winedevice.exe MountMgr
6054 pts/0 S+ 0:00 grep --color=auto wine
I am learning terminal and i want to kill a process. There are 2 ways to do it i ve heard. 1st way is to type following in terminal:
[Code].....
Often I get the following message when starting FireFox:
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.At the same time CPU usage goes to 100%, load is extremely high and my PC is becoming unresponsive.I tried killing the process: Code: killall -9 firefox but without success.In the System Monitor I see that firefox is marked as "uninterruptible" process.
I have a big problem with one of my processes named "mbusd" ;it is an opensource modbus RTU/TCP gateway when I plug USB to serial convertor to it my laptop without this process linux makes virtual ttyUSB very fine and when I unplug it it removes except some times (SOME TIMES not all the times) that I run mbusd process to work with, at that time during mbusd process work when I unplug USB/serial converter the virtual ttyUSB does not disappear and mbusd does not exit too and it turnes in something like this when I get ps -aux: mbusd [defunc] at this time I can not even kill it with -9 or -15 signals and pluging back the converter does not solve the problem too and mbusd does not exit or start to run again.
View 3 Replies View RelatedWe want to kill a process provided that only process name is given and we are to first find out the process id and then kill the process. Yes, in one go! That is, using pipe.
So, I tried this (the bold text):
[Code]...
I want to kill a process when timeout where 2 processes are running parallel or simultaneous in a same user witout effecting the another process,i have used the command
ps -ef |grep user
kill -9
but its killing another process suppose if i try to kill with processname sub processes in that process converting as daemon process and its not killing sub processes when killing parent process.
My script in /usr/bin displays the time on the console tty1 :
Quote:
if [ $(echo &>/dev/null > /dev/tty8; echo $?) -eq 0 ]
then
while [ 1 -lt 2 ]
do
[code].....
I'm started this script : /usr/bin/showtime How i can kill process of this script.
I wanted to know how to kill more than one process in unix??
e.g- I have problem statement as
"Write a shell script to Kill all processes started from your login "
I want to limit the time a grep process command is allowed to run or be alive.For example. I want to perform the following:grep -qsRw -m1 "parameter" /varBut before running the grep command I want to limit how long the grep process is to live, say no longer than 30 seconds.How do I do this?And if it can, how do I return or reset to have no time limit afterwards.
View 4 Replies View Relatedwhen i unload and reload my module ath5k, something is setting my wireless interface in managed mode. I suspect is NetworkManager but when i try to kill this process (using -9 parameter) it restarts. how to kill it or which process is starting it over and over again?
View 1 Replies View RelatedBesides finding out the process ID and typing kill ID? Ctrl+C doesn't work. If I start my java program (which runs in a loop), Ctrl+C only types ^C and doesn't do anything. I have to open up another terminal, log in, find the ID, and kill it.
View 5 Replies View RelatedMy swag is that my VLC has a memory leak and that is why itkeeps dying on my system while playing audio .m3u Playlists of flac filesVLC 1.1.4 Jan 25 2011, ubuntu 10.10, Dell Lattitude laptop D600This is what I see in the syslog
Feb 9 09:24:12 ubugj-DellD600 kernel: [ 4995.881387] Out of memory: kill process 2353 (vlc) score 239282 or a child
Feb 9 09:24:12 ubugj-DellD600 kernel: [ 4995.881401] Killed process 2353 (vlc)
[code]...
I need to add a script that kills cairo dock every time i log out. I've tried various things but I don't seem to have any clue how to do it. Big time newbie here, so keep it clear and concise if you can.
View 9 Replies View RelatedI just bought an SSL cert and installed on my Apache server. When I restarted something went wrong so I had to change some config stuff and when I tried to restart apache for the second time I got this:
$ sudo apache2ctl start
(98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Problem is that apache isn't running. For some reason there is something hogging my tcp 80 port, preventing apache from starting properly. How do I fix this? Is there a way to "free" a port?
I've three user in my machine ,and i want to make sure that the process created by the user1 can be killed by other user and vice-versa ,is there any way i can do that without using root password or sudo
View 4 Replies View RelatedWe have an internal application which takes below 10% cpu usage normally. However sometimes it hit above 85% or more (and stays there) causing the server to become very slow. Currently we have to monitor this manually, kill the process and manually start it.
command / script that will kill the process (using pid will be the best option as i think) when it reaches 85% or higher
(I saw another question that suggested to use monit but I have to get this done using the standard commands available in the current installation - RHEL5)
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies View Relatedfirst time KDE and OpenSUSE user here, went from BSD to Windows now here with you, and I have a small problem. This is pretty much a fresh install, and KDE will sometimes become unresponsive and the computer will disconnect USB devices (mouse keyboard). Although I can still use the trackpad and keyboard on the laptop, no shortcuts work, I cannot kill process, open the terminal, or anything else, and can only reboot the compute via power switch.
I was told by an experienced Ubuntu user to try to replicate the error on demand and post the logs. The problem is, I can't. It will happen pretty randomly, sometimes when watching flash, or sometimes downloading from Yast2. I did take my last logs from a recent crash though and have the pastbin Jan 3 19:54:02 linux-yiyn su: (to root) kris on / - Linux logfile Also as a side note, although running on older hardware, OpenSUSE never seems to utilize more then 7% CPU (1.5Ghz single core) and 130Mb RAM (2Gb DDR). I am told this is unlike linux systems, that they usually idle high.
System: openSUSE 11.3 (i586)
KDE: 4.4.4 (KDE 4.4.4) "release 3"
I have a command that outputs as follows:
# lostjobs
user1 12983 1 0 Feb04 ? 00:00:00 dbr UT:msmenu
user1 18253 1 0 Feb09 ? 00:00:00 dbr UT:msmenu
[code]....
I know I can grab the ones with what I want to kill (which are the ones with question marks) with:
# lostjobs | grep ?
what I need to know is how can I loop through the results of the second one and kill them by id (the second column).