Debian :: Setup A Squeeze Server For A Friend Of Mine Using Exact Apache2 Settings?
May 31, 2010
I just set up a Squeeze server for a friend of mine using my exact apache2 settings. He has been playing around, having a bit of fun learning HTML, but he ran into a problem where one of his images would not display. I at first figured his HTML was incorrect, but after a very long time of trying to figure out the problem, I still do not know what is going on, so I think it must be an apache2 problem?[URL]..
View 14 Replies
ADVERTISEMENT
Dec 9, 2009
I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
View 1 Replies
View Related
Aug 11, 2010
I'm running an up-to-date install of Squeeze, and I'm having an annoying issue where php5 won't parse in userdirs (/home/*/public_html), although it works fine in the main document root (/var/www). I found this bug: [URL] Which seems to say the issue is fixed. However, the last comment for this bug suggests it is still an issue for some.
I've had a look at: /etc/apache2/mods-enabled/php5.conf and commented out the lines suggested in the comment:
[Code]....
..and it still doesn't work. I've googled this and can't find an answer. Anybody know? Am I missing something simple?
View 1 Replies
View Related
Apr 27, 2011
i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
View 2 Replies
View Related
Jun 1, 2010
I'm trying to setup apache2 to drop a core file when it crashes. I know that you need to set the CoreDumpDirectory directive in /etc/apache2/apache2.conf and run "ulimit -c unlimited" from the command line (and restart apache after the ulimit command). But, on a reboot, even though the output of "ulimit -a" shows unlimited, apache2 will not create a core dump file unliess you set ulimit -c unlimited again and restart apache2. There must be a way to configure apache2.conf or something so that ulimit -c unlimited is set prior to apache2 starting, no?
View 2 Replies
View Related
Sep 9, 2010
I have actually done quite a lot with Linux servers over the years. One thing I haven't ever done is upgrade one. At this time, however, it looks like my Lenny server must be upgraded to a newer MySQL, and I'm beginning to think it is easier to upgrade the entire installation.Is there a recommended way to upgrade Debian without disturbing home directories, non-standard directories such as /mystuff, config files such as my.cnf and smb.conf, etc?
View 6 Replies
View Related
May 14, 2011
Looks like I finally have the time to install Squeeze in the next few days. I have the DVDs here and ready to go! Once I finish housekeeping and do multiple backups, I'll be ready to have a go at this I would like to transfer the settings stored in /home from Hardy to Squeeze. Can I just copy and paste? Or will the difference between the two make that risky (or impossible). I am especially concerned about .gnome and .gnome2. I really don't want to have to reconfigure everything from scratch but I also don't want the file transfer to break things.
I would also like some advice about the install. It would be safest to unplug the three active drives, hook up the new 1TB and install / and /home partitions without the possibility of disaster. However, I eventually want to dual boot with the Hardy install. When I reconnect the Hardy disk, will Squeeze find Hardy if I sudo update-grub? Hardy is in ext3 and boots with Grub legacy. Do I need an MBR or is it OK to just boot from Squeeze's /.
View 14 Replies
View Related
Feb 24, 2011
I've just setup a fresh installation of Debian Squeeze and am trying to configure the firewall. I ran a search for iptables and got the following results:
debserv:~# find / -name iptables
/etc/bash_completion.d/iptables
/sbin/iptables
/usr/share/doc/iptables
[Code]....
When I run an iptables command to add a rule and reboot the new configuration is lost even after I have run the iptables-save command. I can't work out where the iptables config file is/should be stored so I could try editing the file with vi.
View 5 Replies
View Related
Feb 22, 2011
When I click on Network Manager client in the Gnome Panel -> vpn connections -> configure vpn, the add button is not enabled.
View 5 Replies
View Related
May 19, 2011
i just installed Debian on one of the computers in the house and nobody likes being prompted for a password so i want it to login as a normal user without requesting a password on startup. how do i do this
View 13 Replies
View Related
Mar 5, 2011
I have so far used reiserfs formatting both in my previous debian (sarge, etch and lenny) and opensuse (SLED10, opensuse-10.2,10.3 &11.3) and was very happy. When last month I installed debian squeeze I missed reiserfs (or did I miss noticing it?) Though Ext3 is giving me no trouble. I would love to have reiserfs. Is it now possible to change the filesystems without much trouble.
View 5 Replies
View Related
Nov 19, 2010
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies
View Related
Mar 16, 2010
I wanted to know is there any way to fetch last new unread emails of mine from a mail server (like gmail or yahoomail or) with a command and make text file from them in a appropriate directory.
View 1 Replies
View Related
Dec 31, 2010
I have a Debian 5.0.7 installed to my server. I try to install Apache and SVN to this server. I use this tutorial: http://www.howtoforge.com/subversion...-ubuntu-server
But is unfortunately not working.
My apache virtual host configuration file is:
Code:
This passwd file containing 1 user:
Code:
The rights for the passwd file:
Code:
And apache2 is running like this:
Code:
And if I try to login to my page I got an "Internal Server Error" page.
And my error is in the apache log is this:
Code:
So I'm a little bit confused about it. The apache2 should have rights to open this file. I checked it, the file is exist and the apache2 is have rights for it. I don't understand it.
View 1 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Mar 22, 2016
How to configure Web authentication against RADIUS server on Debian Jessie, because the package libapache2-mod-auth-radius is not available on debian mirrors.
I would like to know what happened to this package and what is the newest way to configure radius auth. Some people have told me to compile this package, but is there not an easier way to do that?
View 1 Replies
View Related
Feb 19, 2010
Installed Apache2 on a Debian Lenny system. copied my old /var/www/htnl over to the new system.
Now when I open my browser to my PC I get the index.html under /var/www not /var/www/html.
I have this in my httpd.conf:
Code:
From what I have read, the DocumentRoot should have pointed to /var/www/html overriding /var/www?
If I use "10.1.1.13/html" it works the way it should.
View 3 Replies
View Related
Apr 12, 2010
Im running a Debian 2.6.26-2-amd64 webserver with apache2 only on a Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz that has 2GB of ram in it. I installed htop a few days ago and have been looking on it for a few days now. the server idles on about 80~ish tasks constantly with arond 20 apache tasks/connections to it all the time and the cpu usages of the 2 cores at about 1% each. but asoon as more apache2 connections/task get started and the servers tasks reach 120-140~ Apache2 timesout if you try to go to the webpage i host on the server. when it's back down to around 80~tasks you can reach the webpage once again. why is this ? what's causing this to happen ?
View 3 Replies
View Related
Apr 24, 2011
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies
View Related
Jun 28, 2010
I have no idea why, but my website times out as soon as you try to use the cart.(which invokes SSL)It seems to have happened after I went live from testing, but I checked my configurations, and I can't see anything awry in my apache2 confs.Has anyone run into this before?I don't know how or why this happened or how to even begin fxing it
View 9 Replies
View Related
May 25, 2010
OS: Debian 5.0.4
Server: Apache2
I've used mod_rewrite to rewrite my apache2 root (my.server.com/) to point to /var/www/drupal6/ instead of /var/www/. I also have a script installed in my cgi-bin (/usr/lib/cgi-bin) but since the rewrite I can't seem to access it. When I go to my.server.come/cgi-bin/test.pl, I get a page not found from my drupal.
Is there a way I can access my cgi-bin without resorting to accessing my drupal through my.server.com/drupal6/?
Background: I have installed drupal CMS which has a base address of my.server.com/drupal6/ as it resided in /var/www/drupal6/. However I wanted users to be able to access it as my.server.com/ so I added the following into my httpd.conf
Code:
NameVirtualHost *:80
<Directory /var/www/drupal6>
RewriteEngine on
RewriteBase /
[Code].....
View 1 Replies
View Related
Sep 15, 2010
I have a site called http:[url]....configured in apache virtual hosting.Is it possible to make it use https like the below https:[url]....
View 1 Replies
View Related
Feb 8, 2011
I'm completely new to this whole hosting on linux thing. I'm using apache2 and have everything setup as if I was doing it on a windows machine but when I navigate to the site via URL it displays the source code as plan text and thats all I see. I'm running openSuse 10.3.
View 9 Replies
View Related
Mar 23, 2010
I followed the tutorial found here [URL] but when I try to access [URL] I get the following:
Code:
Secure Connection Failed
An error occurred during a connection to www.mydomain.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
Not sure what I might have done wrong... I have retraced all of my steps and I don't believe I missed anything.
View 2 Replies
View Related
Jul 17, 2011
I have an Opteron 6128 that supports AMD-V/SVM. SVM is enabled in bios, but Squeeze does not list SVM in /proc/cpuinfo. What is the problem here?
View 3 Replies
View Related
May 8, 2010
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Code:
You don't have permission to access /po/ on this server.
So I go to the logfile; which says this:
Code:
[Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
View 6 Replies
View Related
Nov 11, 2010
I'm trying to set up and run Monit to monitor an Apache2 webserver, I want to be able to ensure Apache is running and if it's not have it restarted with an email alert sent out.
The monitrc (edited for relevance) looks like:
Code:
check system *server name*
if loadavg (1min) > 4 then alert
if loadavg (5min) > 2 then alert
[Code].....
View 8 Replies
View Related
Jul 12, 2010
any plans to include (or not include) Apache Traffic Server in Squeeze?
View 1 Replies
View Related
Nov 29, 2010
I've been using Debian Squeeze for a few years now, no troubles connecting to a DHCP server in PPOE session... (DSL service) until this morning (11.29.10) when now I do (that is to say; browser, email prog., terminal, real player, etc., just won't connect). I can do dual boot, & so am in Windows XP at the moment.
View 12 Replies
View Related
Feb 5, 2011
I have a Mac G3 and Squeeze 2.6.32-5-686 on an ethernet wired. Works fine with Lenny kde but only in one direction with squeeze kde4. Mac pings squeeze box ok but response is "server may be down or offline". Squeeze connects to Mac normally. Squeeze installed with server option. How do I enable eth0? I need some direction
View 11 Replies
View Related
