CentOS 5 :: Start NX-Client On A Machine?
Dec 17, 2009how I can start NX-Client on a Linux-machine? [URL]... But here is nothing how can I start this tool? Only for windows.
View 5 Replieshow I can start NX-Client on a Linux-machine? [URL]... But here is nothing how can I start this tool? Only for windows.
View 5 RepliesI have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
I need start a virtual machine (Virtual Box) when when my server centos is turned on or start.
View 6 Replies View RelatedI have RHEL 4 U7 installed on 4 machines, with approximately same configuration. yesterday i was trying to set up public key authentication for ssh on them to be able to run some automated jobs but i had a problem with one particular machine: when used as an ssh client to access the other 3, it kept prompting for a password. the configuration worked on the other 3, they can be accessed from each other with no problem. they can also access machine 1 - the one that has the ssh client problem - too with public key authentication.
When i run ssh -vv on machine one i get the following output :
Code:
This is my machine 1's ssh_config file:
Code:
I was wondering how can I rdp to a Linux machine from a windows client.
View 2 Replies View RelatedI am connecting to linux server(RHEL4.7) using putty from my windows machine. Is there any way to get the ip address of my windows machine using C program in linux.
View 9 Replies View RelatedI have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
I have a number of Ubuntu machines running. Our NAS is FreeNAS. I am typing this on an Ubuntu 10.04 desktop that is successfully connects to an NFS share on the FreeNAS box every day. In addition, we have 3 10.04 server machines that also stay connected to the share successfully, Yesterday, I installed a new 10.04 server machine using IP 192.168.0.11. Everything works except connecting to the NFS share. It always returns with: mount.nfs: mount to NFS server '192.168.0.13:/mnt/amrd0s2/public-NFS' failed: timed out, giving up
Here's what I have checked: I can ping 192.168.0.13 (obviously) The NFS export mask is set to 192.168.0.0/16. The other machines are all on the same subnet as this problem machine (192.168.0.*) nfs-common, nfs-client, and portmap are all installed and running correctly. portmap is running correctly showmount -e 192.168.0.13 give the proper response:
Export list for 192.168.0.13: /mnt/amrd0s2/public-NFS/ 192.168.0.0 iptables isn't even installed (these machines are segregated in a private network behind a hardware fire all) There is nothing related to NFS is any of the syslogs. dmesg has one entry: [6.025966] FS-Cache: Netfs 'nfs' registered for caching which is insignificant. how to at least debug the nfs-client short of downloading the source and actually stepping through the code.
I have a Fedora 11 Server which act like a Internet gateway for our LAN. I have my own iptables andt squid. We daily starts up & shuts down the server. Since last few days I am facing a unique problem. When we starts the server we are able to brows the Internet on the Server but from the client machine we are unable to do so but we can ping any internet sites/Static IP from the Client machines. After 2-5 times of startup and shutdown of the Server. We are able to browse internet from the client machine.
View 2 Replies View RelatedI've just set up NIS on my home network (probably not necessary on this scale, but I wanted to try it out). The server and the clients are all running Debian Lenny. I've got it up and running and have my NIS users on the server logging into graphical desktops on a client machine.My problem is this: The users cannot access a lot of services that are native to the client because they're not members of the right groups (for example, they have no sound because they're not members of the audio group). I figured it would be easy; just add users to groups with the usermod command but the response I get is that the user in question is not present in /etc/passwd. If I understand NIS correctly I'm not supposed to add my users to /etc/passwd on the client machines.
View 7 Replies View Relatedwhenever i execute ls -ltr i get following entry. But there is no such user as 501 .What is the issue.
[Code]....
The problem is this folder is mouted on client machine using nfs.But after mouting client machine get hang when i run df -h.
I am using VNC to login to remote machine (vncserver). My question is; How can I login to remote machine (vncserver) through VNC client, without having to login to vncserver first physical. For better explanation here is an example: If john wnat to login to vncserver remotely first he has to login the vncserver physically then he can login remotely.
View 5 Replies View Relatedi have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur. "mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host" both machines ping each other successfully.
View 1 Replies View RelatedIf I go to "Alter channel subscriptions" page of a VM, I do not see any channels to subscribe. It just shows "None (Disable service)". On the same time, I'm getting the following errors in Apache error log and rhn_server_xmlrpc.log
[code]...
When DNS server is configured on Windows server, it will automatically detect and catch computer names and IP address. With Linux (BIND), I have to enter each clients manual under zone file. example (computer1 IN A 10.10.1.4). is there anyway to make Linux detect client automatically as windows does?
View 6 Replies View RelatedI have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.
View 3 Replies View RelatedHave a pureftp server on OpenSuse 11.2 (x86-64 bit), KDE 4.3.5, dual core AMD. It responds to ftp clients on another machine (openSuse 11.1) within the same subnet (192.168....) and delivers lists of directories, changes directories, etc. The clients (gftp, jftp, filezilla, dolphin--tried them all) are unable to upload to the server (after a successful log-in on the server as a user, not root) with an error message that seems to indicate an inability to open the file on the client machine. Also logged in as user on the client machine. From FileZilla:
Command:STOR FCtinyLogo2.jpg
Response:553-Can't open that file: Permission denied
Response:553 Rename/move failure: No such file or directory
What am I missing in permissions? The directory where the JPG is located belongs to the user who is signed in, its in his home directory. The users on the two machines are not the same.
I'd like to access a samba/SSH server which itself is connected to a VPN Server, therefore acting as a VPN Client. As soon as the VPN Connection is established, samba and ssh connections to this VPN Client get a timeout. But not all of them.
To get a better understanding I made an overview. The first one is a general network overview, without any VPN Connection, the second one with the VPN Connection established.
Network Overview without VPN
I can access the server in several ways:
*From the router via ssh (router runs ipcop with busybox)
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Everything is working as it should.
Now the server that runs ssh and samba service connects to a VPN Server on the Internet, this is also working fine. Now it gets weird. The only samba/SSH connection that is still working is ssh directly from the router to the server. Everything else gets a timeout:
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Network Overview with VPN active
Why is that? It seems from the little understanding I have of vpn and networking, that incoming packages (like samba request from the laptop) don't get send directly back over eth0 but over the vpn connection. This seems somewhat logic, BUT ssh from the router is still working. Why from the router and not from the laptop? I really can't get my head around it.
Configuration Overview
tldr; One Client acts as VPN Client and samba/SSH Server. As soon as the VPN Connection is established samba/SSH stop working, but only partially.
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedI have set samba domain. I am able to add win 7 and xp clients. All r working fine. But I have a doubt. If I shutdown the samba pdc server, I should be able to login the client machine with the same profile (which I had, when the samba pdc server was up). Now , if I shutdown the sambapdc, I am able to login the client machine, but new profile is being created. How to avoid this.
How to say to samba that the client machine should load the same profile which was created when the server was up and running. I do not want the client machines to create new a profile when the server is down bcoz in windows domain, when the windows domain is shutdown, the client machines are able to login with the same profile (the profile which was created when the domain was up). I wish to have same thing in samba pdc also.
How to give nfs share access to only particular user at client machine.
View 1 Replies View RelatedI have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
View 5 Replies View RelatedRunning Ubuntu 10.04 to 10.04 over LAN; I can SSH -X into my server just fine, and am able to launch various applications (Nautilus, Gnome-Terminal, Disk Utility, etc) but I'd really like a Gnome desktop. When I've tried the various StartX commands and gnome-session, but something just isn't clicking. Is there a way to have a 'second' Gnome session running on the client over the first?
To pre-empt some obvious solutions; I don't wish to use VNC, the lag drives me nuts, and I'd like to keep my gnome session running on the client machine if possible. If it's not possible, that's fine; it just seems like there'd be a way to do it?
I have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.
1) Where can i get the software for installing the client?
2) How do i install the client once i have installed the software?
This will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
View 1 Replies View RelatedI had ubuntu one working yesterday, by working I mean the client started up from preferences> ubuntu one. Today after doing some updates via update manager it won't start. I would like to purge ubuntu one and start over.
View 9 Replies View RelatedI am running Ubuntu 11.04 and have installed DyDNS client, from the package manager, but for the life of me I can't seem to find anywhere how to run this client and set it to startup with the system?
View 1 Replies View RelatedIf I have only 1 physical WLAN interface, is there some hackery that can be done so that it can be a client of an existing access point and at the same time also act as an access point for other clients? I have an existing 802.11g ADSL router, and I'm going to be building an HTPC which will have 802.11n. My laptop also has 802.11n, but at the moment it only connects at 54Mbps because thats what the AP supports. I'd like to be able to have the HTPC be a client of my ADSL router, but have my laptop be a client of the HTPC, so copying files to it will be faster.
View 1 Replies View RelatedI use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.