CentOS 5 :: New Kernel Cannot Boot After Upgrade
Jan 2, 2010
vmware virtual machine, the system is centos 5.4 want to upgrade the kernel 2.6.32. make menuconfig is based on the default. make; make modules_install; make install no problem, reboot the system to choose a new kernel, new kernel can not boot, the following is vastly map, right in the / boot directory, there is no 2.6.32 of the config files, do not know how the matter , in the compilation before I put / boot directory of the original system config files to the source directory cp The following is the contents of the screenshot
[Code]....
View 3 Replies
ADVERTISEMENT
Mar 2, 2011
I want to upgrade kernel to 2.6..36 from 2.6.18 of CentOS 5.5. The make process is successful but prompt "could not find filesystem /dev/boot " after reboot.
Some articles suggest to edit file .config and set CONFIG_SYSFS_DEPRECATED_V2 to 'y' and re-make kernel. However, the problem still stand there after reboot again.
View 2 Replies
View Related
May 29, 2010
The server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
# cat /etc/grub.conf
default=0
timeout=20
[code]....
View 10 Replies
View Related
Nov 6, 2009
I compiled my kernel, compiled scsi support into kernel, used the new kernel and initrd, the boot failed.Then ,i unzip my initrd, found that sd_mod.ko can't be insert, i added it manual, and reboot OK.so, why! in the kernel configure , the sd_mod.ko is set to <M> , but why it can't be found in initrd?
View 1 Replies
View Related
May 17, 2010
I am running yum update and it thinks 2.6.18-128.1.10.el5 is the latest kernel, even though its really 2.6.18-194.3.1.el5
Code:
[localdomain ~]# uname -a
Linux localdomain 2.6.18-128.1.10.el5 #1 SMP Thu May 7 10:39:21 EDT 2009 i686 i686 i386 GNU/Linux
[localdomain ~]# yum update kernel
[code]....
View 3 Replies
View Related
Sep 19, 2010
Today I upgraded one of my computers with the following command
% yum upgrade
Before the upgrade the computer was running CentOS 5.3 with the versionlock plugin and kernel 2.6.18-128. The update went smoothly (no dependency problems).
If I try to reboot with the new kernel (2.6.18-194), I get the following:
Found volume group VolGroup00 using metadata type lvm2
2 logical groups in VolGroup00 now active
mount: error mounting /dev/root on /sysroot as ex3t: No such device
setuproot: moving /dev failed: No such file or directory
[Code].....
If I reboot with the previous kernel (2.6.18-128), everything is fine.
View 4 Replies
View Related
Aug 5, 2009
there is a bug on the quad core B2 opteron cpu there is a beta patch available , but only for for 2.6.24 kernel i am very happy with my centos, and i would upgrade the kernel to try this patch i am new on linux, so i need a precise tutoriral to upgrade and keep the actual configuration of the kernel
View 2 Replies
View Related
Oct 6, 2010
I have an Nvidia graphics card,... actually I manage several workstations that run centos and have an nvidia video card. I also have a personal computer with ubuntu and an nvidia network card.
I would like to do a regular automatic update of those Centos workstations. (With a pilot group to test and then a full roll-out). Until oktober 2009 no major difference in automatic updating ubuntu and centos (apart from the differences between apt and yum):
After a kernel upgrade, the systems can not boot into it's Xorg gui, because the nvidia driver must be rebuild (=not recompiled, because this is partially object code, the driver is not opensource).
But from ubuntu 9.10 onwards, the kernel update process checks for the presence of propietary drivers like those of nvidia and does a rebuild on the reboot, so that the system can succesfully boot into the xorg GUI (and gdm or kdm) My question is: Are ther any plans for Centos to do the same, this would relief me from some upgrade hassle for the Centos workstations that I manage. Or does anyone know about a (good) automagic workaround?
View 6 Replies
View Related
Jan 26, 2011
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies
View Related
Feb 6, 2010
Can't boot after upgrade to 2.6.31-19 kernel. Boot procedure stops on "Mounting root file system..." stage with message:
/init: line 218: syntax error: 0xhda1.
View 9 Replies
View Related
Dec 2, 2010
I updated ubuntu and installed the latest linux kernel. I rebooted back into ubuntu, then finished up some work and went to reboot into windows 7. The "starting windows" logo comes up then it blue screens and says "cannot boot %hs missing" (hard to read because it flashed on the screen then reboots).I ran startup recovery but that didnt do anything. I also tried downgrading the kernel but that didnt change anything.
View 6 Replies
View Related
Sep 10, 2011
I applied the Kernel update that showed in the updater via the GUI.It now won't boot anymore.Memory for crash kernel (0x0 to 0x0) notwithin permissible range.WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
View 2 Replies
View Related
Jul 18, 2009
I need to downgrade glibc due to a broken kernel after a libc6 upgrade attempt. See:[URL]..Especially with the reduced capabilities I have right now (few if any programs are working), how might I go about downgrading glibc to 2.6?
View 1 Replies
View Related
Oct 14, 2009
I cant boot into Fedora 10 using the latest kernel. It just hangs after grub, I can still boot into an older kernel. The problem is its a fresh install that I ran a full update on straight away, and now I cant install videoaudio drivers because the kernel-header packages (and others) are installed for the latest kernel. Is there any boot parameters I can try to add when booting that might help?
View 5 Replies
View Related
Jan 25, 2011
I've been trying to get Ubuntu on my beloved 4 year old Acer desktop that's been chugging like a tank. However, after either a fresh install or upgrade, I would get the following error:"Kernel panic - not syncing: VFS: Unable to mount to root FS on unknown-block(0,0)".I've looked here and there, and one of the issues it would seem is the kernel not recognizing my hard drive if I'm correct. One of the suggestions was to upgrade the kernel however, I have no idea how to do such a thing if I can't get into the OS.
View 9 Replies
View Related
Feb 13, 2011
I had problems with booting my PC after kernel updates several times. In the past I just reinstalled Ubuntu and after several tries with running Update Manager things were working again.This time I applied another recommended set of updates, including a kernel upgrade and got the usual "Kernel Panic - not syncing: VFS: Unable to mount root fs on unkown-block(0,0)"After booting from a LiveCD and running boot_info_script I rebooted again and this time I am getting tons of errors which seem to be generated while running grub. After a few minutes of 'error: syntax error' and 'error: Incorrect command' scrolling through my screen, grub gives my a grub> prompt... Not what I expected!Here is the output of the boot_info_script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/mapper/isw_cagifdjehe_Volume0 and
[code]...
I have two RAIDed disks (mirrored and showing OK during POST). The disk shows above as a6071eb5-6fc6-45b3-babb-c1a2156278d7. Ubuntu 10.10 installs fine from a LiveCD, but gets broken by kernel updates. I can see the original 1 TB disk when I start with the LiveCD and I can access all the files.
View 2 Replies
View Related
Jan 11, 2010
I had a total freeze during a kernel upgrade, and reinstalled my system(kubuntu karmic) but still cannot boot.
when I try, I get this sequence of text on my screen:
Code:
GRUB loading stage 1.5
GRUB loading, please wait...
Error 15
I know that error 15 means "file not found", but not how to figure out which file it is or how to point correctly to it.
I have tried to install the system on partitions on two separate disks, with the same end result. on the original disk I had some trouble getting through grub install, but on the other disk there were no indications of trouble during setup. can this a problem with the MBR on the first drive?
I have one drive connected by PATA, the rest by SATA, will SATA1 be (hd0)[grub] and /dev/sda [linux], is it the PATA drive, or some other means to determine this without examining the make and model of each drive?
View 1 Replies
View Related
Jul 2, 2010
I messed up my install so now I can't boot it. I get errors. I doubt I'll be able to fix it. I messed up the upgrade of the kernel images... I'm not sure whether there's something I could do in the Grub config file... I have one other Linux OS I can use in the meantime (plus Windows OS) so I thought maybe boot that up and check the Debian partition in case there's any files I want to save/keep. If I re-install, is Debian Squeeze LXDE still a good choice? I'm going to install something different in the partition where the other Linux OS is. Right now, it's grub is handling the boot loader. The computer is an old laptop, a Thinkpad T41. The HDD is 160GB.
View 3 Replies
View Related
Aug 21, 2011
I am running Debian squeeze. A while ago I upgraded my kernel to 2.6.38 from backports. Just now I thought it would be good to upgrade to 2.6.39 from backports. Upgrade went fine, but after rebooting I get a kernel panics rightaway.
"No filesystem could mount root, tried:"
"Kernel panics = not syncing: VFA: Unable to mount root fs on unkown-block(0,0)."
This is the first time one of Linux installations halts/panics on booting, so I don't know what to do now. I tried booting the recovery entry from the grub boot menu, but same result.
View 6 Replies
View Related
Nov 20, 2010
I just upgraded to 10.10 and now I am faced with a choice at boot up of which kernel I would like to boot (or recovery mode, or memtest).I am wondering how to default to the newest kernel without this prompt.
View 6 Replies
View Related
Nov 27, 2010
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
Computer: Dell Hybrid 140G, Intel Core 2 Duo T5800, 4GB RAM
View 4 Replies
View Related
Sep 4, 2009
after updating freshly installed CentOS 5.2 to 5.3, the new - updated kernel remains invisible to GRUB (at least in GRUB boot menu). I've tried reinstalling, adding the entry manually (although one entry for the new kernel already exists, and is default boot target), altering the old kernel entry to refer to the new kernel and initrd (since it is the only entry visible), and nothing worked. Also, the new boot entry added manually didn't show up on the boot menu either. After trying to edit the entry for the old kernel and initrd and boot it i got the following message:
Error 13: Invalid or unsupported executable format. I've searched and found:
13 : Invalid or unsupported executable format
This error is returned if the kernel image being loaded is not recognized as Multiboot or one of the supported native formats (Linux zImage or bzImage, FreeBSD, or NetBSD). The hardware I installed CentOS on is Dell Optiplex 755 with RAID 1 configured - using onboard controller (if this can be of any relevance).
View 6 Replies
View Related
Mar 28, 2011
I installed the PAE kernel package on a Compaq DL380 G3 with 6GB of RAM, CentOS 5.5, vanilla install.
Upon reboot, GRUB cannot boot any of the kernels. I get an invalid device string error. Poking around in GRUB, it detects root correctly at hd(0,0) Beyond that, it cannot even find /boot/grub/stage1. I got out of the bind by reinstalling the kernel that ships with the installer. I'd like to use the 6GB RAM if possible. I attempted to follow GRUB's documentation here: [URL] but there is no grub-mkimage in centos5.5.
Also, the 5.5 installer detects, but appears to have no way to mount usb flash drives. I used the installer disc 1 to get into rescue mode. From there, I inserted a usb flash drive. dmesg and lsusb show the device, but there's no device node and resultant messages when a flash drive is inserted. There is no usb-storage module when doing an lsmod from the installer. I don't have this issue in other distro installers.
View 5 Replies
View Related
May 21, 2009
I decided to try Linux recently. I downloaded CentOS-5.3-i386-bin-DVD.iso. Installation was successful but the OS reports Kernel Panic while booting. At first I can see messages:
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not usin MMCONFIG
The OS continues to boot, but then shows kernel panic.
I tried to solve this problem during several days. I've installed the OS at least 10 times changing conditions. I tried x86-64 version, disabled PAE in BIOS, performed manual partitioning without LVM. The result is the same.
My PC has Intel Core 2 Duo E8400 CPU (no overclocking), 4GB RAM (DDR2-800), ATI 3470 GPU. Windows is working smoothly on it, I can encode video during several hours without problem. All fans are working, the system is not overheated. MemTest86 showed no errors.
I've installed CentOS on my laptop (Core 2 T5600 CPU, 2GB RAM, Intel G945 Video), it works nice, i like it very much.
For testing I've installed OpenSUSE 11.1 on the PC, everything is ok, I'm writing this message from it.
View 7 Replies
View Related
Aug 23, 2011
i installed xen kernel on centOs 5.6 Final 32 bit and i edit and configure grub.cfg but xen kernel won't boot and boot from default Kernel .
what do i do??
i paste grub.cfg here :
default=0
timeout=5
title CentOS (2.6.18-274.el5xen)
kernel /xen.gz-2.6.18-274.el5
module /vmlinuz-2.6.18-274.el5xen root=/dev/sda2 ro
[Code]....
View 1 Replies
View Related
Oct 24, 2010
I had a Centos 5.5 system working great...and then due to crazy curiosity, installed the kernel update. Did this through the graphical interface, uncheck all update other than kernel. It downloaded, installed fine..After reboot now all I get is GRUB_ and then nothing else! I waited 3-4 minutes and had to shut down system. Have been googling around but thought I will post it here as well..When I boot with Win7 and use Ext2fsd to check, the boot folder is empty. Not sure if this is because ext2fsd does not read boot folder or it got wiped out by the yum upgrade process.
View 9 Replies
View Related
Oct 26, 2010
I have recently run an update and now we are unable to boot the newer kernel. We get stuck as below;
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
Red Hat nash version 5.1.19.6 starting
Unable to access resume device (/dev/VolGroup00/LogVol06)
[Code]...
The kernel version we were at was 2.6.18-194.el5 and the update move us to 2.6.18-194.17.1.el5. I've done some googleing but I'm unable to work out exactly what I need to do. I'm guessing the new kernal is missing a module?
View 3 Replies
View Related
Nov 12, 2010
During boot from CentOS5.4 DVD and after choose linux rescue mode, encounters with error:
Code: 8b 5e 04 83..... ........ 3d c0
EIP:[<c0417656>]__modify_IO_APIC_irq+0x40/0x62 SS:ESP 0068:df94eed4
<0> Kernel panic - not syncing : Fatal exception
View 3 Replies
View Related
May 18, 2010
Upgraded two systems yesterday without problems but now have a strange problem with a third. The upgrade went well I think but the kernel hasn't upgraded. Its installed and grub.conf has it listed as the default but after a reboot ( many times now ) the kernel version is unchanged.
View 13 Replies
View Related
Aug 29, 2010
I had Windows Vista and CentOS 5 running on my laptop. But when I upgraded to Windows 7, I think that CentOS is erased as now I am not getting the screen asking me which OS to boot. Now it directly boots Windows 7 only. Kindly tell me is the CentOS erased from my system, if not then how do I get it back and use it.
View 1 Replies
View Related
