I am trying to setup one of my virtual machines in VMware with CentOS 5.2
At the welcome to Centos screen I get the following message ??
an error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.
I have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
I have an HP Compaq nx6125 laptop, which has an AMD Turion 64 2200MHz processor, running Windows 7 Ultimate. I have installed the VMware Workstation 6.5.2 [full] trial and am attempting to install Fedora 11 on a virtual machine.
I understand that the Turion processor is a 64 bit processor, so I downloaded the Fedora 11 x86_64 DVD iso image.
First I have to create a VMware virtual machine (VM) and choose a version for it. If I choose a version that is any of the 64 bit options (for example, "Other Linux 2.6.x kernel 64-bit", since there are specific options for RHEL but not for Fedora), I get an error message the moment I try to power on the VM and start the install, saying "The buslogic SCSI adapter is not supported for 64-bit guests in this release [...]". Then the VM just shuts down.
I guess this laptop does have a SCSI bus, but my disks are IDE and as far as I can see (System Information) the SCSI bus is not used (?).
On the other hand, if the VM I create is any of the 32-bit option versions, I get what seems to be just a warning, saying that I'm running a 64-bit guest OS (Fedora 11) on a virtual machine configured to run a 32-bit OS, and suggesting I change this to ensure the 64-bit guest OS will function correctly. What would be the risks / downsides of forcing the install anyways?
I will also ask for help on the VMware side, too, and it's not my intention to turn this into a VMware discussion, but I'm just wondering if anybody on the forum has worked with this combination (VMware 6.5.2 and Fedora 11 running within it, preferrable on an HP Compaq 6125 running Windows 7 Ultimate) ? If so, I'd really appreciate some feedback / pointers.
I used to work a lot with Linux back in the days of RH5.2, and it's been a while, plus I'm new to the virtual machine world, so bear with me here.
Right now I am using some software to emulate a null modem serial cable on my Windows computer connected to itself. For development purposes I need to have a null modem connection to a linux computer from a windows host. Is there any method of doing this virtually?
View 2 Replies View RelatedI want to setup some virtual machines that will use the same architecture and debian-version as my host-machine. I have started to setup VMs with a netinstall-image and now want to add more software using apt-get. As most of the software I will use is already installed on my host-machine I wonder if there is any way to configure apt in such a way that it will not download packages from the internet, but will use the packages from my host-machine to save network-traffic. Is there a good may to populate VMs using the debs from the host-machine.
View 1 Replies View RelatedI am new to networking and trying to setup my own local area network using virtual box machines. I have installed BIND 9.7.3 using yum in Fedora (dns server) and created all necessary .conf and zone fil es. I am successfully able to resolve domain names on this host machine (dns server). for example dig @dns.domain.lan client1.domain.lan correctly resolves domain name.
[Code]...
I am looking for a version of vmware that manages 2 severs at the same time and that mirrors them such that if one goes down we can still work on the second and of course it also works as a backup. Also, must work on a ubuntu server I have looked but there are so many version that I don't know which one is the best.
View 1 Replies View RelatedI am in verse to test "Multicast Packet filtering".I want to setup Virtual Machines to be servers with bind option set to a multicast group address of 225.0.62.87.Then I want to configure the client VM, connecting to the multicast group address and setting the TTL as needed.
View 3 Replies View RelatedI have a server running VMWare Server on it with 4 virtual machines running. I am trying to use NTPD to keep the time correct on all of the virtual machines. On my physical server, I have installed ntpd and this is it's config file:
Quote:# ntpd.conf
tinker panic 0
restrict 127.0.0.1
restrict default kod nomodify notrap
server 0.vmware.pool.ntp.org
server 1.vmware.pool.ntp.org
server 2.vmware.pool.ntp.org
[Code]...
I've run into a problem gathering usage for my xen virtual systems. With my old model I used to gather all network usage via my cisco devices using the the counters for each port. Each system had it's own port on the switch, and I tracked network usage accordingly. Now that I'm using xen for virtual systems, and multiple vm's share the same switch port, i'm not exactly sure what my best option is for tracking usage.
I thought I may be able to setup vlans on the switch, and bind each vm to a different vlan using vconfig... but it seems like there has to be a better solution than that.
I am new to virtual machines in general, and currently playing with the XEN-based VM in CentOS 5.5. Question: if neither virt-manager nor virsh (using "virsh edit <guest name>" and changing the name in the XML file) are designed to actually change a guest's name...then what is the recommended procedure for doing this?
View 1 Replies View RelatedI installed centos 5.5 Ent as host and i installed vmware server 2.2. i need to Change the location of the 'Virtual Machines' directory(/var/lib/vmware/Virtual Machines) to a directory on /home(/home/Virtual Machines) where there is more disk space.Reinstalling centos and reinstalling Vmware server is not the option for me.
View 4 Replies View RelatedWe've been experiencing sudden host server crashes minutes after starting a fourth virtual machine. Our setup looks like:
Dell Poweredge T300
1 x Intel Xeon X3323 Quad Core 2.5 ghz
16 GB Ram
CentOS 5.3 (64 bit)
Server is running a stripped down version of CentOS 5.3 (64-bit), running only the built-in Xen Virtualization Environment. There is no other services running on the server (not samba, httpd, sendmail, cups... nothing except Xen) We've created several virtual machines, and as long as we don't start a fourth virtual machine everything runs smoothly (impresive hardware).
Each virtual server is configured as:
PARAVIRTUALIZED
1 Virtual CPU
1 GB RAM
However, 5 minutes or so after starting a fourth virtual machine, the entire host server crashes and restarts itself. Are we limited by the number of cores on the host machine CPU (4 cores)? 1 for the host and 3 for virtual machines? We've read in forums about other Xen setups running up to 11 virtual machines on less powerful hardware? (a dual core server). Should we be using FULLY VIRTUALIZED virtual machines instead? Is the number of XEN virtual machines in fact limited by the number of cores? If so, how can someone run several virtual machines on a single core host?
By the way, we were replacing a previous Dell Server (Poweredge 2600 with 512 MB Ram and a single Xeon single core processor running Open Virtuozzo). We were able to run up to 16 virtual machines at the same time. Of course none of the machines endured hard work (testing environments, etc). But hey, my point is that we expected to get a much higher number of virtual machines on this new hardware.
I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.
Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.
Is it possible to install CentOS on a VMWare virtual disk?
And if it is, how many MB is necessary for CentOS 5.6?
I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
View 1 Replies View RelatedI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedSo I have a pretty big networking nightmare on my hands right now. Stepped into the dog crap with this one, told my employer that I knew how to setup vmware servers right? Its not hard, install CentOS, install vmware, run the config tool, bridge the network, down the road we all go right? We have 3 servers running about 10 virtual servers.
Here is what we have all together.
CFU <- This is the internet. We have IP ranges xx.18.230 - xx.18.241 Gateway is xx.18.254 and subnet is xx.255.128
DELL PowerConnect 3348 Switch <- This is what everything is pretty much jammed into.
VMH1 <- This machine has 2 NICs
eth0 connects to the DELL switch somewhere on the upper 30+ ports
eth1 connects to the DELL switch on port 1.
It uses firestarter and is the gateway for our internal internet on 192.168.11.XX using IP 11.254. It has 4 vm's on it. One of them is the domain controller, hooked to eth1 using IP xx.11.1. The other one is a server for managing remote backups, it has an external IP linked to eth0 of xx.18.234. The other 2 vm's are for misc remote login stations that use internal ip addresses linked to eth1. It hasn't had a single problem communicating on either one of the ports..
VMH2 <- This server hosts a web server, and some other misc stations.
It hosts a web server on xx.18.230 and xx.18.231
It also hosts 2 workstations on a seperate network, through another router that is wireless....
Now, we have the problem child, VMH3
VMH3 <- This hosts...nothing. It sits and has a ton of storage, but does absolutely nothing, but won't communicate out either one of its network ports.
The xx.36.xx and xx.22.xx networks are there because we have multiple businesses in the building that shouldn't see each other.
I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies View RelatedI completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
I am setting up a virtual server on CentOS that I want to use as a VPN endpoint. How much resorce should I allocate to the virtual server ? I'm not expecting it to do anything else other than host a small VPN, traffic will be medium / light. I'm tempted to give it minimum ram and drive space.
View 17 Replies View RelatedI have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View RelatedI am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
[Code]....
I installed openSUSE 11.2 and works great. The only problem I have is that I can use the XEN virtual machines only as a root. If I login as a normal user and open the Virtial Machine Manager I receive the following message:Virtial Machince Manager Connection Failure:Unable to open a connection to the Xen hypervisor/daemon.
Verify that:
- A Xen host kernel was booted
- The Xen service has been started
[code]...
I'm considering setting up a virtual machine running Windows, with Ubuntu 10.10 as the host OS, for those cases where I have a Windows-only program.I understand that using a VM will lose some performance, but are there other limitations to what the OS in a virtual machine can do compared to "running on bare metal"?
For example:
Can a VM play games, like Dragon Age Origins or Civilization V? (Possibly with poorer framerates and/or lower resolution, but does it play at all?) Can a VM rip DVD/Blue-ray using AnyDVD or similar Windows program? Can a VM handle new hardware that requires dedicated drivers, but the drivers are only available for the OS running inside the VM? (Ex. graphics card, digital camera, card reader for smart card authentication.) Is it possible to say anything about "general limitations" of VMs, or is this wholly dependent on the specific VM?
finaly got my Centos host ready and configured,i have Vmware installed inside the Centos Host.how can i allow to RDP to the Virtual machines inside th Centos,
View 2 Replies View RelatedI am attempting to put some Virtual Machines on my Fedora13 box. Using KVM it just doesn't want to work quickly.... Using the v.14 LiveCD to try and install an image onto the virtual machine... took over 15 mins to get to a login screen, then I gave up attempting to log in after 5 mins from clicking the login button. I assigned the virtual box to have 1024Mb RAM and access to both CPU.
I then decided to sack it off and try and install VirtualBox... this has been a disaster. I know it's due to the fact that it wont run alongside KVM, and I've disabled KVM (as far as I am aware) - but it's still FAILING on using DKMS (Or whatever it's called - not got the error open at the mo). basically.. am I doing something wrong causing the system to run so ridiculously slowly, and how am I being thick for VirtualBox to fail to install?
I only have one IP adress to access the server. But the server will host 3 web sites and I want them to be hosted in a vm. So, I want to setup 3 virtual machines to do it and use apache reverse proxy and vhosts to redirect the domain requested to the right vm. Now. I understand the concept, but I am not an expert to set that up....
I have an openSUSE 11.3 server. So, I have to set a virtual machine server, is that right? I have been told that I cannot do it with VMware server in oS 11.3. Can I use virtualbox for this? I only have to install virtual box? Is there a special version to install? Once the virtual machine server is install, is it trivial to create 3 vm? So, I want to know wich are the steps I have to take to set that up.
I am Working On Citrix Xen Server.I have Installed two Virtual Machines(Centos 5.3).Now Apache is Configured and its running on the First VM.Can I Set up a Apache Clustering On those VM?.My Aim is "If Apache On the First VM Down,then Apache on Second VM Should Automatically Start".Is there Any Tutorial to Setup Apache Clustering On Virtual machines.
View 4 Replies View Related