I just run the Yum install to update my Centos 5, but system error information comes out to require the ntfsprogs = 1.13.1-1 file.
I attached it below. I download the ntfsprogs-1.13.1-1.i386.rpm form website, then installed it.
However, the error information is still there, I check the rpm has been installed in my computer.
I am an old days RH release user(from 6.x) and just switching back from Debian/Ubuntu to CentOS on some servers, but I can not understand the kernel update strategy currently enabled in CentOS.There are two boxes, with almost identical installation, but recently there was an auto update of kernel on one box. This auto update also seems to issue an auto reboot on the machine, which is unacceptable on server machines.
View 2 Replies View RelatedI recently installed a server with Software RAID. I tested by powering it down, unplugging one drive and powering it up. Magically, it worked!I found out later that I have to manually add individual devices like md1 to sda2 md2 to sda4. I got all of them added and rebuilt but my question is: Is there a way to make it so that if I "removed" a drive and put it back, the system will senses the new drive and rebuilds based on some internal table?
View 1 Replies View RelatedI've noticed that FireFox is still at 3.0.11 on my Fedora 10 install despite multiple auto-updates. Will this not update FireFox to 3.5 auto-magically, or do I need to do it manually myself?
View 11 Replies View RelatedI am using lucid 64bit ubuntu and it seems my auto update function does not work. Since install (on day of release, a clean fresh install) I did not have 1 update, when I check updates manually there are updates.
If I look in /var/lib/apt/periodic there are 2 files on root and 0kb in size:
totaal 8,0K
drwxr-xr-x 2 root root 4,0K 2010-05-01 11:26 .
drwxr-xr-x 6 root root 4,0K 2010-06-01 13:40 ..
-rw-r--r-- 1 root root 0 2010-06-01 11:55 update-stamp
-rw-r--r-- 1 root root 0 2010-06-01 13:41 update-success-stamp
Is this normal? Is there a fix to get auto update to work?
Why do some apps in ubuntu update with the update manager and others don't? Like when I installed chrome browser, it updates with the update manager. But a program like wine does not, until I add the ppa for it. What makes it so some auto update and some don't?
View 4 Replies View RelatedI have my system set to auto update without asking me: So why does it never do this? All I ever see is that icon pop up in my tray. I still have to manually update ALL THE TIME
View 4 Replies View RelatedI logged on my ibm600e with SUSE 11.1 + on Thanksgiving and auto update started and is still running today 12/02/2009. Pentium cpu is at 77 to 97% 93% memory usage plus some swap usage. Ethernet and wireless are activeily working
also separately the CD ROM is not detecting/detected except by the hardware report I sent in. My external Zip100 Is visible. as is the plug in floppy drive
My linux is very limited
I'm wondering how to disable auto update java in redhat
View 4 Replies View RelatedI'm using fedora 13, and it's been a while that yum auto-update doesn't pop up.Some time ago, when updates were available, a notification popped up asking for update (and I love this feature because I didn't have to check manually).Under System>Preferences>Software Update i've Daily check for updates and weekly check for major updates, with no automatic installs.And doing System>Administration>Software updates, it load and updates correctly, just it's no longer automatically checked.
View 8 Replies View RelatedI am having trouble to update my pc using yast or yast2
Bad media attach point: Index of /debug/distribution/11.2/repo/oss
when i run installation_sources -s command i get
# | Alias | Name | Enabled | Refresh | Type
--+-----------------+-----------------------+---------+---------+-------
1 | openSUSE 11.2-0 | openSUSE 11.2-0 | Yes | No | yast2
2 | repo-debug | openSUSE-11.2-Debug | Yes | Yes | NONE
3 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes | yast2
4 | repo-oss | openSUSE-11.2-Oss | Yes | Yes | yast2
5 | repo-source | openSUSE-11.2-Source | No | Yes | NONE
6 | repo-update | openSUSE-11.2-Update | Yes | Yes | rpm-md
But I think the problem is not with that.I suspect the DNS server .. All has been running fine .. then suddenly a warning triangle appears and when I click on it it starts update manager .. then I do a "Check"and it says something like "25 packages need downloading .."Then I get this error (25 times !)W: Failed to fetch http://archive.ubuntu.com/ubuntu/dis...ic/Release.gpg Could not connect to 192.168.1.1:8080 (192.168.1.1). - connect (111: Connection refused)
View 1 Replies View RelatedI keep getting this error when I try to run the auto update. b43 conflicts with broadcom-wl
View 2 Replies View RelatedI updated my fc12 x86_64 server today, and one of the updated included kernel 2.6.31.12-174.2.3.fc12.x86_64 from the previous one of kernel-2.6.31.9-174.fc12.x86_64.When I boot with that kernel, it stops when my logical volumes that are built on a raid 5 array (linux software raid built using mdadm) are not there.I can start them afterward with mdadm --auto-detect which seemingly loads the appropriate modules and starts the array, but I have never had to do this before.
Reading the mdadm man page, it mentions that this is generally done by the initrd. So, I am guessing the initrd that came with the new kernel is missing something.
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies View RelatedSubject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
[Code]...
I'm using Maverick Meerkat, 10.10, 64bit. I'm a pretty basic user but am trying my best to learn.
My background: I have a laptop on which I installed Win7 Ulimate on one partition. After installing Win7 I then installed Ubuntu on a separate partition. GRUB2 found both Win7 and Ubuntu perfectly. I could choose to boot into either one and the ability for GRUB2 to "remember" which OS I booted into last worked properly. I then did a kernel update a couple days ago via Ubuntu's Update Manager. After that, GRUB2 could no longer see Win7. I added a custom boot entry in /etc/grub.d/ so that Win7 would show up in GRUB2.
However once Win7 did show up in GRUB2 I kept having a problem with the Windows bootloader being missing. I used the Win7 Recovery DVD to get into Windows and then installed EasyBCD for Win in which I was able to create a Win7 boot entry and get the Win7 bootloader back. I set EasyBCD to skip the bootmenu so my current configuration now is that on bootup I see GRUB2, which shows Maverick Meerkat & Win7. If I select Win7 then Win7 loads via EasyBCD and it works fine.
The problem though is that GRUB2 does not auto-detect Win7 AND it no longer remembers the last OS that I booted into. I would rather not use EasyBCD if I can help it and would like to just use GRUB2 for everything.
My question is this: How can I get GRUB2 back to controlling Ubuntu & Win7 properly without the need for anything else in between. I have asked in the Freenode Ubuntu channel but haven't received any help besides "sudo update-grub" which I have done and it hasn't helped.
Firefox auto update keeps failing so...I need help locating the original installation location.
I tried downloading the update and using archive manager to open rather than save, but still it wanted to save. Now I can't find the location it selected.
I want to locate the downloaded saved and delete the new files, to conserve space.
And I need to learn how to force an Automatic update.
I found a folder named firefox and another firefox 3.0 System will not let me delete / move to trash.
I want to update to latest version. Don't want to remove the original and lose all my bookmarks
I recently broke down in the face of morbid curiosity and clicked that little version update button. it seems to run flawlessly (after i uninstalled the pesky touchpad) but it takes a long time to boot up now. at least a full minute. is this normal?
I will add also that it said my version of grub had been modified (which i dont remember doing, but may have) so i told it to leave the current one in place.
I've recently installed Centos 5.3. Each time the pc starts KDE starts automaticaly, how can I remove that? I dont want to uninstall KDE, I just want to begin in the konsole and start KDE only if I need it.
View 5 Replies View RelatedOn two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
i have a centos box with interfaces eth0 and lo:0. i want to write a script to stop or start lo:0 automatically when eth0 comes down or up.
View 2 Replies View RelatedI would like a USB thumb drive to be automatically mounted whenever I insert the drive into my PC (previously I had been mounting it manually with the 'mount' command). I gave the USB drive a unique label with e2label. I added an entry for it in /etc/fstab. This works in the sense that if I run "mount -a", the drive will be mounted. However, it still isn't completely automatic. Am I missing something? What else do I need to do?
View 8 Replies View RelatedI have downloaded CENTOS 5.5 32-bits ISO and burnt in a CD. While trying to install it in VMplayer, the installation is started automatically without asking me to input anything.
How can I stop the auto installation? Or I have downloaded a wroing image?
my mouse is not being seen so I need to log in without the xsession autostarting to get a cmd line login.
my account will not let me login with my passd so the console is my only access with root but i cannot do anything withourt a mouse.
1. How can i get logged in?
2. How can I stop xsession from autostarting on a reboot once i get loged in i can try to remove that setting and boot the box.
3. secure session lets me in but the xterm is not active so I cannot type any commands.
For some reason, when I do a yum check-update I get a list of no changed packages to install. If I follow this immediately with a yum update then it tries to install drbd83. I've tried a yum clean all and repeated the commands and get the same thing. This happens on both the machines that are set up to use DRBD. Just seems weird and I don't understand. Anyone got an explanation?
[root@here]# yum check-update
Loaded plugins: changelog, downloadonly, fastestmirror, priorities, protectbase,
: security
Loading mirror speeds from cached hostfile
* epel: www.mirrorservice.org
* base: mirror.sov.uk.goscomb.net
[Code]...
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View RelatedI have a fiberoptic broadband 20MB synchronous pipe at my home. Over summer at my place of employment its pretty much dead for 3 months so when I'm not busy I play around on my home server. I have my 20mb pipe going directly into my wrt54gl, from there I have a wired connection going to my server (Centos 5.3 recently upgraded to 5.5 through updates.) It serves as a file server(Samba, SSH). My wrt54gl handles natting port 22 to my server. I have my wireless AP setup to hand out leases from .2-.20 and my server has a static of .100. Dyndns.org handles my name resolution via their free account method.
I have a Mac Pro, iMac, Macbook, and a Toshiba Laptop with 64bit 7 running off wireless along with our cell phones, and my XBOX 360 also is wired directly for the gaming speed. I use all of the computers around my home to access the samba shares via unc path for file sharing and or working on projects. I had originally planned to upgrade the wrt54gl with a cisco e3200 or an e3000 but unfortunately I've come to find out dyndns and the e lines of cisco wireless AP's dont work with dyndns and get banned. So I would have to install the daemon on my server and put it as a directly connected server to my WAN link and install a second ethernet card and pass traffic through my server for the rest of my home which I am not going to do.
All of the previous sentence because it would update dyndns with a 192.168.x.x address since its not directly connected. I use a combination of putty.exe and vnc viewer to tunnel 5900 through port 22 to my server. So from anywhere I am at I can access my screen securely and then rdp or vnc to the desktop of my local LAN computers. This allows me to only have port 22 open. I've been looking at my ssh logs and noticed I have been getting hit alot with ssh scans. I want to implement an iptables firewall on my linux machine just for the purpose of further securing port 22. I dont necessarily need natting on the iptables firewall but all I need is ssh in and out, web in, and samba out to local ip's only.
For SSH this is what I want. I want to allow SSH from any IP but if it tries to login more than 3 times in one minute I want to block that IP for a full minute before it can try 3 more attempts. I also would like log to a file but have been having issues getting that to work as well. That way when I review logs and I see that an ip tries three times and then waits a minute and tries three more, etc... I can permanently block that ip or range of ip's by adding it to the iptables script. Here is my current iptables script and it doesnt seem to be working for me. I have played with this and read for almost two weeks and still cannot get it to work correctly.
Code:
#!/bin/bash
# In order to use this iptables firewall script you must have iptables installed. You also must be using a 2.4.x series Kernel, with iptables suppport compiled into it, which is standard for most newer linux distributions.
# If you need help compiling iptables into your kernel, please see our kernel Compile/Upgrade Guide located at [URL]
# Once the script has been edited with all your relevant information (IP's Network Interfaces, etc..) simply make the script executable and run it as root.
# chmod 700 fw_rules.sh
# ./fw_rules.sh .....
# Our final trap. Everything on INPUT goes to the dropwall
# So we don't get silent drops.
$IPT -A INPUT -j dropwall
I have set up a software raid 5 and a software raid 1 on the same 3 disks.
But my problem is, every couple of days the software raid starts automatically resyncing. This resync is always succesful.
I do not know why this happens, any ideas to troubleshoot this further? I can not see an error in /var/log/messages
I am trying to make a bash-script for auto-logins on several hosts, seems there is a problem with the quotes and I can't figure it out. I've experimented with singles and doubles but no luck yet. Below are two variants with respective outputs. In both cases the output of echo works fine if I copy and paste it to a prompt, but when executed from the script it falls down.
* Only one case-clause for testing...
* Not possible to use passwordless key-login
#!/bin/bash
PASSWORD="my_password"
case "$1" in
"example1" ) HOST="example-host-1"
echo $HOST;;
esac
if [ $HOST ]
then
COMMAND="expect -c 'spawn ssh $HOST ; expect assword ; send $PASSWORD
; interact'"
echo $COMMAND
exec $COMMAND
else
echo "No host argument"
fi