I'm connecting to my CentOS with remote desktop. While trying 'setxkbmap' the following error is occurring:XKB extension not present on :17.0It doen't happen on the console, i.e.when DISPLAY=:0.0
View 4 RepliesI've been trying to get the dual monitors to work the way I want them to, so far no luck. I read that xinerama would enable dragging between two X screens so I went to System -> Preferences -> Monitors and clicked the box for xinerama. Rebooted and now the top panel is on the other screen and, more importantly, I can't access the monitor controls anymore.When I click on Monitors I get an error message that says "Could not get screen informaion, RANDR extension is not present"I love Ubuntu, but the work required just to get it doing what I need it to do is tough to soldier through.
View 1 Replies View RelatedI've got brand new Dell Optiplex 380 (Intel E8400 chipset) that I wanted to use to test new KVM virtual environment, after installing Centos 5.5 - (64bit) I'm not getting any further than "egrep '(vmx|svm)'color= always /proc/cpuinfo" as it is not showing that CPU is capable of VMX. Now this URL... says that it is perfectly up to what I want from it. I specifically installed W2k3 server R2 on the same box previously to run these apps, just to be sure URL...everything was nice and green and according Windows and those apps perfectly VMX-capable, but still CentOS isn't recognizing VMX capabilities.BIOS settings are all enabled...
View 4 Replies View RelatedInstalled Centos 5 on IBM T60P laptop. Intel 82573L Gigabit ethernet controller. Keep getting this erro message, "e1000 device eth0 does not seem to be present, delaying initialization."
View 3 Replies View RelatedI have configured IPv6 in my main server and I can ping IPv6 address (eg. google). but I want to do the same on my VPS.What do I have to do to add an additional IPv6 IP to my already present VPS (IPv4 configured)?I tried the web, but no complete info of doing so anywhere.
View 1 Replies View RelatedI just kickstarted this box - I used eth0 and had no issues. After booting - eth0 is not available/present. This was not an issue in 5.2. This is a dell 4600 - both the 100mb intel and gig broadcom are onboard. I am about to try a different kernel. This is not a show stopper - it's plugged into 100m switch and I can just use eth1 - but I am curious as to what is different and why this no longer works.
[root@localhost ~]# ifup eth0
tg3 device eth0 does not seem to be present, delaying initialization.
[root@localhost ~]# lspci
00:00.0 Host bridge: Broadcom CMIC-HE (rev 22)
00:00.1 Host bridge: Broadcom CMIC-HE
00:00.2 Host bridge: Broadcom CMIC-HE
00:00.3 Host bridge: Broadcom CMIC-HE
00:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) .....
I have added a new network card on my Cent OS machine. This is a RTL-8139/8139C/8139C+ card. When the machine boots or I start the network it displays "eth1 does not seem to be present,delaying initialization."I have gone through different posts on the forum with similar problems and have posted output of some of the commandsOutput of lspci is
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[code]....
I been working on this issue for a couple days without success. PHP.ini will not load extensions. I am able to modify php.ini parameters successfully with the exception of the extensions. It would be appreciated if someone can shed some light on this issue.
Troublshoot
check for multiply php.ini
restart apache
1. Environment:
CentoOS 5.2
Apache2
PHP 5.11
2. dir
apache2= /usr/local/apache2
php = /usr/local/apache2/php
lib = /usr/lib which contains pdo.so, pdo_mysql.so, sqlite.so, pdo_sqlite.so
[code]....
I'm running CentOS 5.2 on an ASUS M2NPV-VM motherboard. This motherboard includes an NVIDIA nForce 430 built-in Gigabit MAC (network interface). I've also installed a second PCI network interface card (NC100 Network Everywhere Fast Ethernet 10/100). The PCI-based card was configured as eth0, while the built-in NIC was configured as eth1. The machine is used as my firewall/router, so eth0 is my internal interface, while eth1 is my external interface. I've had some intermittent problems with the built-in (eth1) NIC. When booting the machine and it attempts to bring up the interface, I get the following message: forcedeth device eth1 does not seem to be present, delaying initialization From that time forward, there is no eth1, and so no external network, etc. If I try running /etc/sysconfig/network-scripts/ifup eth1 (from that directory), it results in the same error.
Originally, I was getting this error when installing the operating system on the machine. At that time, I was using a 75' ethernet cable (as I was working on the machine in my office, and the external ethernet jack was in another part of the house). As soon as I moved the machine to its permanent location (which is within 2 feet of the ethernet jack), the problem went away. However, I just updated the kernel (via yum) from 2.6.18-92.1.22.el5 to 2.6.18-128.1.6.el5, and now it fails 9 out of 10 times. I'm not even sure what I can do to debug this. I'm assuming there is some kind of timing problem with the initialization. Is there a configuration parameter I can set to allow more time for the initialization to do what it needs to do, to prevent this error?
I have a CentOS 5 server with PHP 5.1.6 installed. Now I need to work with soap but the extension is not installed by default.Preferably without recompiling (if possible) ? Specific instructions would be very helpful.u Also, if you need any further information, let me know.
View 6 Replies View RelatedEthernet card works, but Wireless card activation fails at bootup time. It also fails if I try it again from the Network Configuration UI.
I have provided some output I got from initial exploration.
I upgraded to a recent version of the 2.6 kernel.
uname -a: Linux localhost.localdomain 2.6.28.7 #1 SMP Sat Mar 14 19:04:11 PDT 2009 i686 i686 i386 GNU/Linux
I have installed the correct firmware hopefully.
cd /lib/firmware ls
Output is:
I do have the bcm* files for firmware.
output of lspci is:
Last two lines show the that Wireless card BCM4312 is visible.
how to enable php-mysqlnd extension in php-5.3.6 in centos 5.5. I tried no solutions and no proper google docs.
View 1 Replies View RelatedI just can't figure out how to enable openssl on my server. I've searched around on the web but have come upon dead ends. I recently became the admin to a server of a new company, the previous admin installed everything on this server. The server has php running which was installed thru yum I believe. And so was OpenSSL. Recently though I've been ordered to configure a online sales software. So I started investigating what I would need. I know I need OpenSSL, a certificate which should be bought, etc.
I met the dreaded dead ends when I came upon knowledge that I had to make OpenSSL work with PHP. Ok so I got to work. I found out that I needed an extension enabled in php. And the only way (that I've read so far) is thru compiling PHP with the command --with-openssl-dir=path. The problem is that I've compiled many times now and see no change in the phpinfo file. Can the extension be enabled (--with-openssl-dir=path) even after the php and openssl have been installed thru yum? I'm also new to linux
I have a centos 5.5 machine. First I upgraded my php to php 5.3. So I was then installing phpMyAdmin so I just put the whole folder into my /var/www/html/phpMyAdmin.The I tried to run my phpMyAdmin and I got this error Cannot load mysql extension. Then I uinstall my mysql db and reinstall it. Again it show me the same error.For addition info via the php info page for the Configure Command I saw this option -without-mysql' .
View 5 Replies View RelatedAfter upgrading to 11.2, I get the following error when starting any xclient. Worse, its usually repeated a few times for each client.
Xlib: extension "Generic Event Extension" missing on display <my_ip>
I get this both when using Xming and nomachine.
I've installed Centos 5.4 _AMD64 on my PC, everything is ok except I can't connect to internet. I can see my hardware in the network manager I also have eth0 and wlan0 but I can't activate them. for eth0 an error of " No cable present" and wlan0 something about the ip I don't have a cable and I used to connect through wireless My wireless is PCI Ralink and I had the same situation with Debian and I think I needed to download extra packages to get it working. I am writing from windows vista now ,So please could you provide me with the packages and steps to get wireless working through offline process because I don't have a cable.
View 4 Replies View RelatedI have a linux account in my college (A server-client setup. We use SSH to login to our account)My account quota is 20 MB and one day I logged into my account from a Fedora machine and my entire account became full, thanks to .xsession-errors, his older brother and their pals. So I went on a killing spree with [rm -r]and (you guessed it!) I deleted someimportant file. I think lognames or something.Now I can't see in which directory I am. Every time I have to do [ll] to check the contents of my directory to understand my location
View 4 Replies View Relatedi'm using nsd3 on debian 5what i want to know, how do i not have this output when i queried mydomain.com
Code:
# host mydomain.com
mydomain.com A record currently not present
[code]...
I messed up my computer a little bit... I had F14, but I wanted to format the entireisk. I launched an installation cd with some older version of Fedora,dered it to remove everything (but I didn't accept changes, that's important!), but in the meantime I changed my mind and I wanted to wipe the disk the other way. There was no 'quit' button anywhere,just.. powered off the computer. Dumb, I know.Right now it doesn't work at all. At first, I thought I destroyed the partition array, but I looked into the bios and it says that no HDD drive is installed. And I have no idea what to do now. I tried to find a solution via Google, but all I found were problems related to newly bought hard drives. Nothing about a blonde powering off the computer during the installation process though .
View 4 Replies View RelatedRecently, I've started to use Ubuntu operating system.. the last version 10.04 LTS. I downloaded the .ISO image file from the site and burnt a CD to use it back, but I was wondering now after I installed my Ubuntu and made all updates and upgrades to the applications and added all packages that might be useful for me, can or can't I burn the present system with all the add-ons that I've added on DVD/CD?? Instead of using the old CD that I made which is free of all packages and necessary programs.. or at least, is not there downloadable files from the internet that allow me to install the packages and the programs offline!! Considering that I might not be able to have an internet connection..
View 9 Replies View Relatedwhy I get this message during startup? I have to chose efore I can start up my system."The disk drive for /data is not ready yet or not presentContinue to wait; or Press S to skip mounting or M for manual recovery"Once upon a time I had a partition with that label, but I've since deleted it and resized my system partition to use that space. Why does my system keep looking for this drive?
View 7 Replies View RelatedI've been seeing issues with this for the last few months when getting kernel updates. Never on every reboot, but this last time has been somewhat stubborn. Usually I can go back to the previous kernel, boot, reboot and I'm good. But not this time.My fstab:
Code:
# /etc/fstab: static file system information.
#
[code]....
I've just done an upgrade install from Maverick to Natty, and noticed (while poking about in Synaptic) that version 4.4 of g++ was installed alongside 4.5. (Further investigation revealed that this was the case for both gcc and gcj as well.)
If anyone here installed Natty from scratch, could they look in Synaptic and tell me if both versions come installed by default? Or can I assume the presence of 4.4 is simply because it was installed under Maverick and get rid of it?
I'm using the "Ubuntu Classic" interface (i.e. Gnome) and admit that I don't know if it's possible to get the required information from Unity's "Ubuntu Software Centre".
I would like to mount several partitions into my dd of my /dev/sa, normally I do this with gdisk... however the gpt gdisk debian is not there into the leeny testing repositories... any ideas if it has moved into another packages
View 1 Replies View RelatedI originally installed Debian and configured it the way I want it without any problems. It was working perfectly and I was happy. I then tried openSuse. I did not like it and re-installed Debian five hours later. Now I have a strange problem. This is the third re-install. With the first two, after installing a few fonts the system says the fonts are present, but they cannot be displayed. I only get empty rectangles. The fonts are not available in office and there is no text at all on the internet. Only photographs and a few icons. This forum for example, only has lines separating the posts.
I do not know why there is a problem, because I am configuring the system the same as the first time; install scim and add a few fonts. The founts are not in packages, but I need them for some of the work I do in office. Since Debian uses this strange permissions system where the user is not considered the owner of his or her computer, I use gksu nautilus. I makes no difference if I leave the permissions of the fount folder as root or change it to me. I am completely at a loss. As I mentioned, I am doing the same thing I did the first time, so there should not be any problems.
I recently built a few boxes from old scraps, figuring I would give those good ol' K6-2s a second chance with Fedora. I didn't got far though. On booting the install CD, the kernel will spit immediately after loading: "this kernel requires the following features not present on the CPU: cmov"
I've tried with the Live CD I already had, and on seeing it's marked as i686 on the download page, I also tried with the normal "i386" non-live install, with the same result. I can boot Knoppix just fine, so I'm guessing what I want is a Fedora install with a kernel not optimized for i686. Does such thing exists? Probably not, unless I get an old release. But which one? And should I be able to update to fresh versions? Or what alternate methods of installing could I use?
when I try logging on to my OpenSuse 11.1 Server.I get this error:rdpx11 channel not present
View 4 Replies View RelatedOS: LucidSymptoms: Launchers are in Desktop folder, but they are not on the desktop. Also, when I "right click" on desktop, nothing happens (no pop up menus). Attempts to add new launchers to desktop (via "add launcher to desktop" or "click-n-drag") are notsuccessful.Symptoms the same on both monitors.Possible Cause: I just completed a problematic install of 2nd monitor (NVidia X Server). Currently running in TwinView. After install was completed I noticed launchers were missing.Info: Desktop folder is owned (RW) & group (R) to my user, execute is enabled, and Others is R, as are all files in folder.
View 1 Replies View RelatedI tried to upgrade to the newest ubuntu version (10.04 I think). Now I can't even boot my computer. After the initial "boot" stuff, the ubuntu screen comes on and then locks up in the process. I get the message "The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery."I've tried "waiting" overnight to no avail. I tried the "S" command to skip and got the message "[141.233783] Adding 1502036k Swap on /dev/sdb5. Priority-1 extents:1 across:1502036k"
I think the manual recovery is what I need to do. When I type the "M" for manual recovery I get a maintenance shell with the last line being.Can anyone please give me some commands to fix this problem? I have an OLD ubuntu boot disk. How can I get my computer to boot from it? I tried hitting "esc" while booting up to no avail. I also tried hitting F1 while booting up. I think that used to allow me to boot from the CD drive...but doesn't work now.
Xubuntu: Grub Editing, Menu.lst not present
ver: 10.04 Lucid Lynx
performed update
Grub now features Redundant options upon boot
similar to the following
Ubuntu, kernel 2.6.32-22
Ubuntu, kernel 2.6.32-22 (recovery mode)
Ubuntu, kernel 2.6.32-21
[Code]....