CentOS 5 Networking :: Eth1 Does Not Seem To Be Present,delaying Initialization?
Sep 24, 2009
I have added a new network card on my Cent OS machine. This is a RTL-8139/8139C/8139C+ card. When the machine boots or I start the network it displays "eth1 does not seem to be present,delaying initialization."I have gone through different posts on the forum with similar problems and have posted output of some of the commandsOutput of lspci is
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[code]....
View 8 Replies
ADVERTISEMENT
Mar 15, 2009
Ethernet card works, but Wireless card activation fails at bootup time. It also fails if I try it again from the Network Configuration UI.
I have provided some output I got from initial exploration.
I upgraded to a recent version of the 2.6 kernel.
uname -a: Linux localhost.localdomain 2.6.28.7 #1 SMP Sat Mar 14 19:04:11 PDT 2009 i686 i686 i386 GNU/Linux
I have installed the correct firmware hopefully.
cd /lib/firmware ls
Output is:
I do have the bcm* files for firmware.
output of lspci is:
Last two lines show the that Wireless card BCM4312 is visible.
View 5 Replies
View Related
Apr 4, 2009
I'm running CentOS 5.2 on an ASUS M2NPV-VM motherboard. This motherboard includes an NVIDIA nForce 430 built-in Gigabit MAC (network interface). I've also installed a second PCI network interface card (NC100 Network Everywhere Fast Ethernet 10/100). The PCI-based card was configured as eth0, while the built-in NIC was configured as eth1. The machine is used as my firewall/router, so eth0 is my internal interface, while eth1 is my external interface. I've had some intermittent problems with the built-in (eth1) NIC. When booting the machine and it attempts to bring up the interface, I get the following message: forcedeth device eth1 does not seem to be present, delaying initialization From that time forward, there is no eth1, and so no external network, etc. If I try running /etc/sysconfig/network-scripts/ifup eth1 (from that directory), it results in the same error.
Originally, I was getting this error when installing the operating system on the machine. At that time, I was using a 75' ethernet cable (as I was working on the machine in my office, and the external ethernet jack was in another part of the house). As soon as I moved the machine to its permanent location (which is within 2 feet of the ethernet jack), the problem went away. However, I just updated the kernel (via yum) from 2.6.18-92.1.22.el5 to 2.6.18-128.1.6.el5, and now it fails 9 out of 10 times. I'm not even sure what I can do to debug this. I'm assuming there is some kind of timing problem with the initialization. Is there a configuration parameter I can set to allow more time for the initialization to do what it needs to do, to prevent this error?
View 12 Replies
View Related
Jun 17, 2009
I have swapped out four known working, different bran network cards. Each one I get the same error as in the subject. If I boot to a Live CD such as CentOs 5.3 LiveCD both Nics are given an IP. This seems to only be happening with my CentOs 5.3 server install.I noticed the CentOS Live CD the Nics were reversed from eth0 to eth1 and eth1 to eth0.
At the moment as of the output of the commands, I am running two identical Nics, since the first one has always worked. I have previously used an rtl8139, 3com c3905-TX, onboard Rhine III based (now disabled) Here are steps I have done to try and figure this out:
Quote:
[root@centos ~]# lspci | grep -i eth
00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
00:0e.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
Quote:
[root@centos ~]# cat /var/log/dmesg | grep -i eth
eth0: VIA Rhine III at 0xee800000, 00:1b:11:bb:17:7d, IRQ 177.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[code]....
I went through the system-config-network-tui. I copied /etc/sysconfig/network-scripts/ifcfg-eth1 to the ifcfg-eth0 and edited for sanity. and as stated earlier, have swapped out four different nics for eth0, and booted to two different LiveCD's. Both LiveCD's work fine.
View 3 Replies
View Related
Jun 7, 2010
i have problem related nici am using a dell inspiron 1545 laptop outputs are following---(1) [root@localhost ~]#lspci |grep -i ethernet 09:00.0 Ethernet Controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13)
(2) [root@localhost ~]#cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias scsi_hostadapter1 usb-storage
[code]....
View 1 Replies
View Related
May 14, 2009
I am struggling to install RHEL 5 in one Hp Compaq dc7900 machine. My network is not coming up with a message e1000e device eth0 does not seem to be present. lspci givens following message
00:19.0 Ethernet controller: Intel Corporation Unknown device 10de (rev 02)
Subsystem: Hewlett-Packard Company Unknown device 3035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
[code]....
I could see /etc/modprobe.conf has a line "alias etho e1000e" present. In fact another machine dc7900, installed with Fedora Core 10, detects the card with e1000e as the module.
[code]...
View 2 Replies
View Related
Mar 15, 2011
I recently upgraded mu Fedora 13 to Fedora 14, I decided to add another NIC that I assumed it'll be eth1, when I boot the PC and typed #ifconfig eth0, eth1, lo appears. But when I typed #setup eth1 is not present. Why is that? I remembered doing this in Centos 5.5 but it automatically appears after I added a NIC and boot the pc? what should I do?
View 2 Replies
View Related
Mar 4, 2011
I need to setup two ethernets in my Centos box. OK no problem both ethernet and 1 virtual works perfect. eth0, eth1 and eth1:0. I'm trying to set up diferent routes for eth0 and eth1/eth1:0 I need eth0 has a 192.168.1.1 gateway and eth1/eth1:0 192.168.1.100 gateway.I think I've tried almost every thing but always get one gateway for all the eth.These are my config..
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:XX:XX:XX:XX:XX
inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0[code]......
View 7 Replies
View Related
Oct 2, 2010
I recently setup a new SUSE box for the purposes of acting as an ftp/sftp server. It's currently setup to run ProFTPD 1.3.3.rc3 and mod_sftp/0.9.7. The server has two internal network interfaces eth0 and eth1. eth0 is purely for internal use to accept ftp and ssh. eth1 is outward facing and receives connections from the WAN via SFTP over port 22. The problem I am facing is that after half hour to an hour eth1 stops accepting connections whenever there is no SSH connection present on eth0. I can't figure out why this is happening.
ProFTPD is setup as follows: SocketBindTight directive is on, default server and port are commented out.
[code]...
When the external interface is unreachable the proftpd and proftpd-sftp logs show no record of any connection attempt. I have noticed however if I leave eth0 down eth1 stays contactable without problem. Can anyone give me some pointers on what I can check to find out why this may be happening.
View 2 Replies
View Related
Jun 7, 2009
I want to install CentOS from netinstall CD, but it doesn't work for wireless connection, because it just looks up for eth0 connection. Well, I connected server to wired USB connection and it's named eth1. I want to use netinstall CD but using eth1 connection. Is there any way for doing it?
View 2 Replies
View Related
Jun 5, 2009
i have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies
View Related
Dec 21, 2010
Installed Centos 5 on IBM T60P laptop. Intel 82573L Gigabit ethernet controller. Keep getting this erro message, "e1000 device eth0 does not seem to be present, delaying initialization."
View 3 Replies
View Related
Jul 28, 2011
I have configured IPv6 in my main server and I can ping IPv6 address (eg. google). but I want to do the same on my VPS.What do I have to do to add an additional IPv6 IP to my already present VPS (IPv4 configured)?I tried the web, but no complete info of doing so anywhere.
View 1 Replies
View Related
May 7, 2009
Centos 5.3 How can I change the primary nic from eth1 to eth0? My board has 2 nic's and I'm having license issues with cpanel
View 2 Replies
View Related
Oct 18, 2010
I'm having a problem and despite I have googled a lot cant find the root cause. I have a server with two embedded NICs and centos 5.5 loaded. I need to have one NIC with a fix internal IP address to communicate with the intranet and a second NIC with a fix address from my telephone provider. I know I cant have two different gateways on the net so I configured only the gateway for the second NIC leaving the field empty for the first.
I found that the first NIC is handling all the traffic for both interfaces (eth0 and eth1) and the second NIC is in standby (or doing nothing). This is causing the traffic intended for the second NIC never reach their destination. After a couple days working with the BIOS and other configuration files I tried another way of solve the issue. I put a fix address for the first NIC and another fix address for the second NIC (both in the same subnet) and from a computer pinged successfully both addresses. However if I disconnect the cable for the first NIC both interfaces goes down (eth0 and eth1) and both pings fails. If I disconnect the cable for the second NIC (with the first one connected) both pings still running without any disturbance.
I worked also in a second server with different hardware (different kind of motherboard, different NIC manufacturer, etc.) but the problem is also present in this second server. I was reading about NIC bonding or teaming, but this configuration is not present in the modprobe.conf or in the ifcfg-eth0 files, so I believe the problem is not related with this feature. Do you know what is happening with the NICs and how can I get two really, fully independent NICs?
View 7 Replies
View Related
Nov 8, 2010
I have 2 network interface on 1 server and i got a problem finding a solution for it.I have 1 java application and i want it to use the eth1 for that application and not the default eth0. On eth0 i got for example xx.xxx.xx.22 and on eth1 i got xx.xxx.xx.23 and i want the java app to use the 23 ip one.
View 3 Replies
View Related
Nov 24, 2010
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1.
Eth0 : 192.168.1.3
Eth1 : 192.168.1.5
Here is the configurations files:
== BEGIN uname -rmi ==
2.6.18-194.17.4.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5
== END rpm -q yum rpm python ==
== BEGIN ifconfig -a == .....
View 3 Replies
View Related
Apr 22, 2009
I just kickstarted this box - I used eth0 and had no issues. After booting - eth0 is not available/present. This was not an issue in 5.2. This is a dell 4600 - both the 100mb intel and gig broadcom are onboard. I am about to try a different kernel. This is not a show stopper - it's plugged into 100m switch and I can just use eth1 - but I am curious as to what is different and why this no longer works.
[root@localhost ~]# ifup eth0
tg3 device eth0 does not seem to be present, delaying initialization.
[root@localhost ~]# lspci
00:00.0 Host bridge: Broadcom CMIC-HE (rev 22)
00:00.1 Host bridge: Broadcom CMIC-HE
00:00.2 Host bridge: Broadcom CMIC-HE
00:00.3 Host bridge: Broadcom CMIC-HE
00:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) .....
View 5 Replies
View Related
May 28, 2009
I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address
eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1
When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"
I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct
GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none
[Code].....
View 2 Replies
View Related
Apr 14, 2011
Problem: Can't get bridging to work properly.
I'll start by saying that most of this is built inside of a 64bit ESXi 4.1.0 server. Should be obvious by the picture below.
Trying to set up a bridged CentOS box. Ultimate goal is to set up a Transparent Firewall. The machine labeled 'Desktop' is a Windows XP running DHCP. It gets assigned an Internet routeble IP address. At this point, nothing is running a firewall.
Symptoms:
Gateway can ping CentOS bridge
CentOS bridge can ping gateway
CentOS bridge can resolve DNS names and ping FQDNs on the Internet.
CentOS bridge CAN NOT ping Desktop
[Code]....
View 12 Replies
View Related
Sep 21, 2010
I have openvpn tunnel setup between two CentOS servers. One of the CentOS servers also acts as a DHCP server for some client computers.
Server A= OpenVPN server
Server B= OpenVPN client (connects to Server A with OpenVPN)
The two CentOS servers can ping each other (172.16.0.0/24) via the tun0.
However, client computer connected to Server B (DHCP server) can't reach 172.16.0.1 (which is the OpenVPN server).
I think I am missing some routing in my "ip route show". Following is the full picture:
What command can I issue to get this fixed? something along ip route add?
There is no firewall service on both end. service iptables stop! I can't bridge eth1 and tun0 as DHCP server might mess up the other side. I can't do a push of "redirect-gateway def1" because then clients loose their IP as they send DHCP requests to Server A.
View 2 Replies
View Related
Jul 30, 2010
I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
View 3 Replies
View Related
Nov 25, 2010
I am trying to mount a directory from my server onto my wireless laptop. The directory mounts successfully if I am already logged into the laptop with another account first but if I log on initially with the user who requires the mount the mount fails. I suspect the mount is taking place before my network connection is up, is it possible therefore, to delay the mount in fstab until the network is fully connected?
View 3 Replies
View Related
Jan 21, 2010
I've installed Centos 5.4 _AMD64 on my PC, everything is ok except I can't connect to internet. I can see my hardware in the network manager I also have eth0 and wlan0 but I can't activate them. for eth0 an error of " No cable present" and wlan0 something about the ip I don't have a cable and I used to connect through wireless My wireless is PCI Ralink and I had the same situation with Debian and I think I needed to download extra packages to get it working. I am writing from windows vista now ,So please could you provide me with the packages and steps to get wireless working through offline process because I don't have a cable.
View 4 Replies
View Related
Sep 29, 2010
I need to set up my centOS computer as a firewall in my home network. Ive got 2 interfaces, eth0 and eth1. I want to allow and forward all traffic on eth0 and block all traffic on eth1 except ssh, ping(icmp) and DNS. How do I do this? Ive tried some editing in /etc/sysconfig/iptables but no luck.
View 1 Replies
View Related
Sep 27, 2010
I have a hardware device with two ethernet ports, eth0 and eth1 running Centos 5. Basically my goal is to forward packets from eth0->eth1 and eth1->eth0 as well as get a copy of these packets for analysis. If I set IP routing to do the forwarding then I won't get a copy of the packets for analysis.
View 3 Replies
View Related
Jul 30, 2010
So I installed the Unison synch software with sudo apt-get install unison-gtk. When I set up the two directories for synchronization it looks like this: $ unison ssh:\SERVER\pathpath /var/www/path/path/path
I am getting this error in terminal Uncaught exception Gtk.Error("GtkMain.init: initialization failed ml_gtk_init: initialization failed") Fatal error: exception Util.Fatal("Error in getLogch: /home/path/.unison/unison.log: No such file or directory"
View 1 Replies
View Related
May 5, 2011
I'm working on a kickstart install to automate a lot of monotony doing installs. When i use the kickstart install i get an error on boot saying "File based locking initialization failed" "no volume groups found". Then it proceeds to boot up with no issues and appears to work just fine. Below is the section of my ks.cfg for creating the partitions: %include /tmp/partition.cfg is included where the partition info usually occurs. The user is prompted in the pre script for how large they would like the partitions to be and then the script below creates the included file with partition info
[code]...
View 3 Replies
View Related
Apr 2, 2009
I run many 5.2 virtual machines inside of VMWare ESX3.5 I've updated a couple of test VMs from 5.2 to 5.3. The thing that stands out is that during boot time, the sequence gets to this stage:
device-mapper: dm-raid45: intialized v0.2429 Waiting for driver initialization.
Here it takes about 3 times longer than the previous Centos 5.2 (about 9 seconds instead of 3). Whereas inside a physical box the wait in 5.3 is the same as it was in 5.2
View 4 Replies
View Related
Mar 23, 2011
I'm connecting to my CentOS with remote desktop. While trying 'setxkbmap' the following error is occurring:XKB extension not present on :17.0It doen't happen on the console, i.e.when DISPLAY=:0.0
View 4 Replies
View Related
