i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
I just want to place upload/download limit to each ip address ( say 20MB per day for each ip or specific ip) using squid proxy i tried through delay pool but it control only download/upload speed not place any download/upload quota restriction. following are my codes I have 1Mbps line
delay_pools 2 delay_class 1 2 # here 700kbps(87Kbytes) Net-Total usage limit, with 50Kbytes per user
[code]...
I also used
"reply_body_max_size" parameter to control upload limit.
But
"request_body_max_size" only restrict download based on size.
how to setup quota ( download quota per day per ip)
I have a vsftpd server configured and I cannot upload using anonymous account, I've trawled the net have have exhausted my search for answers. Here is my vsftpd.conf file
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults.
I've got that vsftpd running on a ubuntu 9.10 machine. Although I cannot upload any file, I always get a "550: Permission denied"-error.
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. #
I've been trying to set up an FTP server for a client, which is something I haven't done before. Things seemed pretty straight forward at first, had everything working, but now I have just one last minor problem.
I'm using vsftpd as my FTP daemon. I managed to configure it to allow only user to log in, I have write enabled, etc. Now, this server is in the 172.16.10.* range. I have servers in two other ranges that need to connect to it and down-/upload files. These ranges are 192.168.15.* and 192.168.16.*. The ones in 192.168.15.* are physically in the same location as my FTP server. The ones on 192.168.16.* connect through a VPN, using a Netscreen 5GT firewall.
Up to this, no problem yet. The problem is this:
I tried the following from the 192.168.15.* range:
- connect: no problem - login: no problem - list directory: no problem - download file: no problem - upload file: no problem
Now I tried all of this from the 192.168.16.* range as well. Everything checked out except for one tiny crucial thing. I'm not allowed to upload files, I get "550 Requested action not permitted". I login under the same user I've verified I get the correct directory listing, so absolutely everything checks out to be the exact same.
I want to enable the communication b/n ibm tsm server and ESX server . for that reason i want instal /etc/init.d/vsftpd in my sys. But iam unable to find the link which can provide me this software [/COLOR].
vsftpd 2.3.2-3After user uploaded a file it has -rw-------(0600) permissions. Of course user can change permissions manualy to any he likeBut how to set for example 0700 by default?
I have many clients uploading to the same directory.
I have set chmod to 733 and chown to another user on the upload folder so that the different clients do not see each others files, but that also causes the client to not see their own files after they are uploaded or not being able to resume broken uploads.
I would like the different user log in with their own username and password but all upload to the same directory and not see each others files, but just their own. Is this possible? Or does anyone have a tip how to achieve something similar?
I use vsftpd. I would like to know if there is a way to limit the upload speed. Only the upload speed so the "anon_max_rate" and "local_max_rate" don't do the job. Someone told me about the trickle but I expected a more recent application.
I`m looking for some php script or maybe some nice GUI to vsftpd. There problem is that in our company very often we have to create download links for our clients.
Do You know any nice free linux software which could be administer by web panel ? Command nice is nice but its painfull if admin is on the holiday...
I've setup a Lamp Server for Testing, The Lamp Server is Up & Running on CentOs 5.5
I am now trying to setup a VSFTP server where local users can upload files to there home directory so that Apache can serve web pages straight from the directories of system user home/accounts giving users the ability to run their own web sites which are hosted off the main server [tutorial here: [url]
So far i have been able to serve/display index.html files from the users home directory [url] but so far i cant upload files to any user home directory, every time i try to upload a file with filezilla i get this error message: 553 Could not create file. Critical file transfer error
I have searched online for similar problems like mine and so far i've tried alot of the solution but none seem to work. I'm confused, dont know where i went wrong, i put the users in a group called ftpusers and here are the permissions on the users (test, ftpuser & testftp) home directory. have a look an tell me where i went wrong :(
Also the root directory where the web pages are served from is called public_html here are the permissions
Here is my vsftp.conf file can someone check it to see if i made any errors in there:
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
I open "man vsftpd.conf", it says syslog_enable If enabled, then any log output which would have gone o /var/log/vsftpd.log goes to the system log instead. Logging is done under the FTPD facility. Default: NO So I add "syslog_enable=YES" to the /etc/vsftpd.conf, and add "ftpd.* /var/log/ftplog" into /etc/syslog.conf. But there is no log infomation in the ftplog file.
I'm still learning my way around CentOS and linux in general... Using CentOS 5.4
BUT, I used the scripts from HowTo/Chroot Vsftpd and it did not work with the non-TLS script config, but the with TSL worked great. I wasn't sure where to put the vsftpd_virtualuser_config.tpl file but I copied it over when the script failed to find it... to where it was looking.
So I think it's working but my question is, TLS doesn't use port 21 but the script defaults to that port. I'm using FileZilla from an XP machine at work and I'm forwarding all the ports given in the HowTo. So I'm forcing the client to use TLS on port 21 but it hangs on the connection. If I use non TLS I get in but it tells me it requires TSL. I've had no luck with vsftpd in the past and this is my next attempt.
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
I've only recently encountered this problem with vsftpd when I was creating new ftp accounts. I keep on getting:
550 Access Denied.
on every action I try to do on ftp, no matter what. I've been trying to solve this myself however my attempts have been futile.
The permissions, and ownership have been checked and rechecked tens of times now, so thats not the issue. I've reinstalled the OS of my server twice now, and the problem is still persisting. Heres my config file, this isnt for anon by the way.
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. #
I already have this setup working in a debian server but I would like to setup the same in CentOS 5.3. I just copied all the configuration files to the CentOS server but I'm getting the following errors in messages:
vsftpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... vsftpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... crond[24483]: nss_ldap: reconnecting to LDAP server (sleeping 4 seconds)... crond[24483]: nss_ldap: reconnecting to LDAP server (sleeping 8 seconds)... crond[24483]: nss_ldap: reconnecting to LDAP server (sleeping 16 seconds)... crond[24483]: nss_ldap: reconnecting to LDAP server (sleeping 32 seconds)...
I set up my vsftpd server, but when using "sftp servername" it's not using vsftpd but another (what seems like) built-in sftp server. Even when I stop the vsftpd service I am still able to get a prompt to log in. I haven't installed any other ftp servers.
After few hours working I can connect to ftp.And download files from the server.But I can not upload file or create directory.I checked my configure file several time could not figure it out.
I'm configuring a new public mail server running Centos 5.5 and Sendmail 8.13.8. I would like that the sendmail configuration is correct. The server will handle many domains using Virtualmin. Everyone can send mail only if authenticated, which I already tested.
How can I upload configuration file? I receive an error if try to upload a zip file.
I'm able to connect to ftp as a virtual user. It was also difficult as nowhere mentioned, that it should be done with SSL. Anyway I found the answer and got connection. But now I can't connect to ftp server as system user. It gives me "530 Permission denied", or if I delete the user from the file denied_users, - "530 Login incorrect".
1. Still I can't understand, how I can log in to FTP server with a system user.Also some other questions regarding this matter:
2. My httpd server Apache has a virtual hosts located in "/home" directory.The scripts create users in "/var/ftp virtual_users". Will it cause any problem if I will change them to "/home"? All I need to do with this is ability to have several virtual hosts in one server with separate access to each of them via FTP. And 1 account with access to all files in "/home".
3. In my ftp client I can see the owner of virtual host "ftp" instead of username.
I'm having difficulties with uploading files to a CentOS-server with vsftpd. I have the exact same configuration on a Fedora10 and there I have no problems...
Trying to set up VSFTPD on the CentOS 5 box at work, which is an internal web development server. I'm leaving soon, and all knowledge of or desire to learn SSH is going with me so the other employees will need to be able to access the web root using FTP clients.
Essentially there is no need for special user accounts or privileges, it's an internal server in a tiny company. I've got the LocalRoot set to /var/www/ which I can log in to and read all files via FTP, however despite setting everything to 777 in /var/www/ and below, I still can't get any write privileges on the FTP server.