I have an OggVorbis video file that only plays the audio on Centos 5.5 using SMPlayer, and mplayer from the CLI. This video works OK if I boot into Fedora 12, where I created it with recordmydesktop. the xvinfo output for F12 and CentOS 5.5 is the same:
[Code]...
This morning, I ran yum update and discovered it was an upgrade from 5.3 to 5.4. Nice, but.... The upgrade went well, no errors, did a reboot to reset everything and now no video output. Good thing I did full system disk backup prior to the upgrade. I am wondering if anyone else has this problem?
I will attempt to boot from a CD/DVD but just thought I would check here first.
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies View RelatedI am trying to watch a video file on a Centos 5.6 Linux. The file does not open. It says "Totem could not play 'file:///root/Desktop/LinuxCBT/Disk1/video01/video01.wmv'. A Advanced Streaming Format (ASF) demuxer plugin is required to play this stream, but not installed." I thought maybe Totem is not capable to play this so i went ahead and installed mplayer on the system (yum install mplayer mplayer-skins mplayer-fonts. I also downloaded this all-20110131.tar.bz2 from this site [URL]. I created a folder called codecs in /usr/local/lib/codecs. I uncompressed the content of all-20110131.tar.bz2 and put them in the codecs folder. I went to folder /usr/local/lib/codecs and did chmod 755 *. I can now hear the sound but no video. when I write gmplayer -ov x11 at the terminal command prompt the mplayer opens, when I open the video file, I can hear the sound but no video. Basically my question is how can I see a video file on Linux? Have I missed something? Did I download wrong files? If I revert and try to open this with Totem, where do I get the necessary plugins for Totem?
Here is the output;
[root@localhost codecs]# gmplayer -vo x11
MPlayer SVN-r31628-4.1.2 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
[Code].....
how could i convert SWF video file to AVI video file on linux? is there any tools ?
View 1 Replies View RelatedI just upgraded from Ubuntu 9.04 to 9.10 today, and went to watch a movie on my hard drive. I typically do this with an S-Video cord on my TV. In Ubuntu 9.04 I did so simply by plugging in the S-Video cord, then pressing FN+F4 on my keyboard. Worked like a charm.
After the upgrade the same key combination just changes my resolution setting.
On my pc, video playback is not as it should be. Somehow, not all video frames are displayed. In smplayer, I have video output set to x11 (slow). If I set it to anything else, it's worse. How do I know exacly what video output to choose ? Is video output determined by the video card ? My video card is ATi Radeon 9200 SE. What video output should I set in smplayer ?
View 1 Replies View RelatedIm trying to be able to output video to my tv with a low end atom cpu box(link below) running debian lenny. I realize it wont likely be true HD video. I also realize I wont be getting surround sound. My tv is a little bit older so it doesnt have a monitor input or I would have tried that. It does have HDMI and component though and i have a DVI to hdmi adapter and audio cables that will work once I have a video out solution. It does have a PCIE expansion bay but the power supply is only like 150w so i dont know that Ill be able to use a regular video card. I had considered some sort of usb output but dont know if any of that will work on linux. Any suggestions? Im pretty novice with the whole computer on my tv area and dont have alot of money to build a whole new system or i would just do that.
[URL]
Excuse me if this is in the wrong place, I am new to the forum and Debian.
Today, while installing Ubuntu, I had a strange issue with my laptop in which after installation, I heard startup sounds and had no video display. After hours of frustration and about 7 install disks, I plugged my laptop into another monitor, and low and behold, it appears both of my desktops are on the external monitor. After trying to solve this issue, I decided to give the Debian Gnome live CD a try, but I now have the same issue.
Is there a way VLC to use vdpau as video output? Mplayer and Gnomemplayer can use it and the video playback uses as little as 2-4 % CPU power even on 1080p movies. Xorg and Kwin continue to use pretty much CPU power in video playback process , I suppose there is no way to limit them or there is ?
Open Suse 11.4 86x64, KDE4-4.5.6, NVidia 275.xxx.xxx
I can't seem to figure out how to get the S-Video output working on my T41, and most of the info that I seem to be finding is for older versions before xrandr so files and settings don't seem to match.
I know that it's not a hardware/cable problem because this exact setup works fine under windows (even though there i'm working with a hacked video driver setup since one doesn't exist for any of the "modern" versions of windows, ati radeon 7500 (mobile))
Hardware: HP dv3505ea laptop
Ubuntu: 10.04 LTS
uname -a: Linux adventure 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64 GNU/Linux
HDTV: Panasonic TX-L37D28BSA
I'm having trouble getting any output from my laptop's HDMI socket. I've had a search and can only find sound problems, mine is no visible output whatsoever.
Let me describe the setup: Laptop has a HDMI socket which I have never used before, HDTV has 4 HDMI inputs, I just bought a HDMI cable to connect the two to try it.
After connection I go to System->Preferences->Monitors and the TV is detected fine with the correct description and offers me 3 different resolutions. xrandr also works and gives me the same thing:
Code:
However none of the options display ANYTHING on the TV. The screen remains black, not even a flicker.
I have connected the laptop to the TV before using an analogue VGA (monitor) cable which worked in the same way with no problems.
Could this be an encryption/DRM/DVI problem? I have suspicions about the cable too because it is new and I haven't seen it work, but it wouldn't detect the correct TV description and resolutions would it? It was sold as an XBOX360/PS3 HDMI cable, is there a difference? It looks like a standard HDMI male-male cable.
Other things I've tried:
Log off and log back on to restart the X server
reboot
Some more stuff:
Code:
I was experimenting with transcoding video with ffmpeg. using the command
Code:
ffmpeg -i moviename.avi moviename.mkv
outputs the .avi into .mkv, but the output quality is very, very bad, while the original is dvd-quality.
Fairly new to debian and linux and general. I have an install of debian wheezy (to run LinuxCNC). I went in the graphical interface to the 'monitor' section and changed the screen resolution. I had two monitors, one labeled monitor and another (I think) Lenovo Monitor.
There was a check box in the screen monitor window that said something like, "Don't use this display." I figured it might turn off the lenovo and default to the generic monitor listed. I clicked it and my monitor turned OFF!! I tried another monitor (Dell in this case) and same thing, no video output.
I asked on the LinuxCNC forum and googled, but I just dont' seem to be able to figure out what or how to get to the solution.
I have been able to Ctrl-Alt-F1 to open a terminal. But, I can't find any the right files and found that the xrandr command 'should' work, but doesn't.
Whenever I issued the xrandr command (other than man xrandr), I get "Can't Open Display"
I did find two outputs VGA1 and LVDS1 in this file /var/log/Xorg.0.log and this coincides with what I saw in the monitor window. These are the 'output' types and if the xrandr command worked I'd issue something like : xrandr --ouptut LVDS1 --auto
I read about xorg.conf, but I could not find any xorg.conf files in the etc/X11 folder. In some of the info I found, the xorg.conf was replaced in this or a recent version of Debian by something else and confuses me.
One person had a similar issue and he got to this directory: $HOME/.e/e/config/standard" and found files such as:
"e_randr.cfg" plus "e_randr.1.cfg" thru "e_randr.9.cfg"
But, I can't get to that folder. How to turn on my monitor display?
I'm using Debian Lenny with an nVidia 8400GS. Before I changed motherboards (and graphic cards, as apparently AGP doesn't exist anymore) this set-up worked fine, but with the new hardware, I can't use the TV as a second screen anymore: there's simply no image going through. All that's visible on the screen is "No video signal".I've tried the proprietary nVidia driver and nvidia-settings, but nvidia-settings doesn't even see the second screen. I've tried adding it manually to xorg.conf, but again, nothing.
View 4 Replies View RelatedI'm trying to record my desktop and tested some solutions. While I was impressed how small .mng files could be, it is a disadvantage that I can't capture audio with it and many users won't be able to open these (browser / Windows). I have been very impressed by the xvidcap instruction videos: 4:30 in only 9MB, which makes 180MB for 90 minutes. This would be suitable. With Camtasia my professor even records 90min in 100MB. The problem is that xvidcap hasn't been updated since 2006 and seems to be dead. RecordMyDesktop needs 6MB for 1 minute or 540MB for 90 minutes, which is too much. Could anybody give me some hints on how to capture very small video files, which are still clear enough to read text in a format most users can open? It would also be cool to be able to show specific PDF or HTML pages synchronised to the video.
View 3 Replies View RelatedI have a new cluster of four OpenSuSE servers serving VM's for a development lab. I have been fighting the good Linux/OpenSuSE fight against established Windows environment and I am embarrassed by certain hardware behavior in X.The four machines are in a cluster with an inexpensive TrendNet TK-407 KVM. The Linux Boxes are Dell T3500's with NVidia Quadro NVS290. I am not running the NVidia proprietary driver.
The behavior is that X keeps placing the display in sleep/powersave mode. If I boot the machine everything works until X takes over upon which point it decides that the display is not there and places it into standby.I don't care whether the KVM may or may not be responding correctly to some monitor protocol, and neither do I care to know or learn about the various DPMS or monitor protocols. The important thing here is that Windows experiences no such behavior. The solution I seek is to configure X to force the signal out of the card, disregarding any DPMS or other protocols.
I've been running Ubuntu for about 2 years now. When I first put it on my Dell it was 9.0x. My HDMI port worked just fine to connect to my Plasma to watch movies on. I've only ever connected it 2-3 times. Since Fall '08 I haven't used it again. I never needed to.
Since that time, it stopped working. When available I upgraded to 9.04, 9.40 and now (effective 10.23.10) 10.04. It just doesn't work anymore. Neither VGA or HDMI. I can only assume S-Video will be the same story. Video card is an NVIDIA GeForce 8400m GS. Driver is version 173. I installed NVTV tv out (Nvidia Video output controller). It does nothing. When NVTV is typed into terminal, it says; Fatal: No supported video card found.
In the control centre under multi media selector for configuring GStreamer it has Autodetect and two other setting, X Window System (No Xv) and X Window System (X11/XShm/Xv) etc. When I test the X Window System (No Xv) the test card in full screen is far better then autodetect, should I keep this setting, the reason I ask is I can't notice the difference when watching video.
View 1 Replies View RelatedI've just installed Xubuntu 10.10 on a ThinkPad R50e and on a R51. I want to get them working as fast as possible. Of cause, all updates are done and all codecs for gstreamer have been installed, too.
Parole Media Player tells me to not be able to initialise Xv output, so no video appears on screen.
Then I've started to search for the cause of trouble. Seems to be an Intel grafics adaptor handled by the Vesa module, which I don't know how to change to the correct Intel module (which is installed, by the way).
I've googled for this issue and found few other people talking about. But there was no solution, at least none that I could understand.
Now, I would be really glad if you could help me to find a working solution during the next few days.
Code:
~$ xvinfo
X-Video Extension version 2.2
screen #0
no adaptors present
Code:
~$ lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
code....
I'm running Ubuntu 10.10 w/ an ATI HD 4350 and trying to output to a CRT television over S-Video @ 640x480. Problem is the screen blanks out after ten minutes no matter how I configure my screensaver or power management settings. I've done some research regarding commands in Terminal, but I can't find anything straightforward.
View 2 Replies View Relatedvlc always open video with xvideo output in ubuntu 9.10
View 1 Replies View RelatedI try to connect my graphic card with my TV. I have ATI Radeon 4850 card with 7 pins S-video output and I want to connect it my TV using s-video to RCA cable (the RCA output is yelow, red and white, I assume the 7 pins has audio signal as well).
My card doesn't have problem when connect it wit my monitor via DVI, but the S-video out is not detected. How can I enable it? Can I configure the card from KDE? If so, how?
I'm using the driver from Slackware package and I'm using Slackware 13 stable 64.
I recently acquired an HP Pavilion 7845 and have since installed XUbuntu on it. The onboard video, which is shared with the main system memory, is OK. But I am wondering if there are any compatible PCI video cards (possibly with DVI output) so that I can use it with a 32-inch LCD TV I have.
View 1 Replies View RelatedIs it possible to make video output (to monitor) black and white? Without changing the monitor settings, of course.
View 2 Replies View RelatedI have a ubuntu server running on a ten year old desktop and it runs great but i cant seem to change the video out put away from the normal anolog port to a TY port.My server is just for home use and I do not know the terminalThe reason I need to move to the other port is I do not have a screen for it but I do have a little old TV that will work.
View 2 Replies View RelatedI would like to know if anyone has built a system with a video card that provides a composite video output. Which Linux distro and video card are you using that allows for composite (YES composite) video output from a video card?
I am looking for specific answers here because I don't want to reinvent the wheel if its been done before or waste, money and time.
I am curious if perhaps I am doing something wrong extracting pages from a pdf doc using pdftk and creating a new file. I am only extracting the odd pages from the file and outputting them to a new file that is now only 20 pages instead of the input's 40 pages, yet the new output file is still 1.4Mb in size, the same as the original.
It seems strange to extract only half the pages of a large document and end up with a result that is the same size. how to streamline the resulting pdf's using pdftk?
BTW this is the command I am using, in case perhaps I am missing an option to optimize file size or something:
Code:
pdftk A=ch15.pdf cat A1-40odd output odd.pdf
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies View RelatedI have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?